- 您现在的位置：买卖IC网 > Datasheet目录591 > 122842-3 (TE Connectivity)TOOL CHAMP CRIMPER .8MM 36POS Datasheet资料下载
参数资料
| 型号： | 122842-3 |
| 厂商： | TE Connectivity |
| 文件页数： | 1/4页 |
| 文件大小： | 0K |
| 描述： | TOOL CHAMP CRIMPER .8MM 36POS |
| 标准包装： | 1 |
| 相关产品： | 91085-2-ND - TOOL MANUAL ARBOR PRESS |
0.8mm CHAMP* Crimper Assemblies
122842- 1, 122842- 2, and 122842- 3
Instruction Sheet
408-- 4040
25 FEB 10 Rev C
Manual Arbor Frame
Assembly 91085-- 2 (Ref)
Flat Head Cap
Screw (Qty: 2)
Setscrew
(Ref)
Adjustment Ring
(Ref)
Handle (Ref)
Socket Head Cap Screw
(Ref)
Tool Mount
Rear Tool Stop
Crimper
Frame Assembly
Slide Base (Ref)
Ram (Ref)
Tool Stop (Ref)
Cable Clamp
Spring
Slide Plate
Figure 1
Support
Block
i
1. INTRODUCTION
0.8mm CHAMP Crimper Assemblies 122842--1,
122842--2, and 122842--3 are designed for use in
Manual Arbor Frame Assembly 91085--2 (shown in
Figure 1) and are used to crimp metal backshell
assemblies onto 0.8mm CHAMP connectors. This
instruction sheet provides procedures for crimper
assembly installation, adjustments, crimping, and
maintenance and inspection. Refer to instruction
sheet 408--7777 for details concerning the operation
and maintenance of the arbor frame assembly.
Read these instructions thoroughly before using the
crimper assembly.
NOTE All numerical values in this instruction sheet are
in metric units [with U.S. customary units in
brackets]. Dimensions are in millimeters [and
inches]. Figures are not drawn to scale.
Reasons for reissue of this instruction sheet are
provided in Section 8, REVISION SUMMARY.
2. DESCRIPTION (See Figure 1)
The crimper assembly consists of an upper and lower
tooling assembly.
The upper tooling assembly consists of a tool mount
and a crimper. The crimper is secured to the tool
mount, which is mounted to the ram of the arbor
frame assembly with the socket head cap screws
supplied with the crimper assembly.
The lower tooling assembly consists of a slide plate, a
support block, and a cable clamp spring. The lower
tooling assembly mates with the slide base of the
arbor frame assembly.
3. INSTALLATION OF CRIMPER ASSEMBLY
To install the crimper assembly, refer to Figure 1, and
proceed as follows:
DANGER The frame assembly must be secured to a work
bench to ensure stability during operation.
E 2010 Tyco Electronics Corporation, Berwyn, PA TOOLING ASSISTANCE CENTER 1-- 800-- 722-- 1111
All Rights Reserved PRODUCT INFORMATION 1-- 800-- 522-- 6752
TE logo and Tyco Electronics are trademarks.
*Trademark. Other products names, logos, or company names might be trademarks of their respective owners.
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.tycoelectronics.com
1 of 4
LOC B
相关PDF资料 |
PDF描述 |
|---|---|
| 122990-3 | ADAPTER CQM G |
| 12510000 | APPLICATOR WAND Z SERIES SIZE 7 |
| 125ESE | TRANSFORMER 15W 80MA TUBE SNGL |
| 125GSE | TRANSFORMER 25W 100HZ-15KHZ |
| 126117-1 | CONN INSERTION TIP FOR 91039-1 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 122843 | 制造商:Emerson Network Power 功能描述:SPARE/CENT 21K FT2/6E - Bulk |
| 12284392 | 制造商:n/a 功能描述:12284-392 |
| 12284-392 | 制造商:n/a 功能描述:12284-392 |
| 122844 | 制造商:Emerson Network Power 功能描述:SPARE/CENT 21KX MP2/6E - Bulk |
| 122845 | 制造商:Emerson Network Power 功能描述:SPARE/CENT 21KX/CHASSIS-DC/5E - Bulk |
发布紧急采购，3分钟左右您将得到回复。