- 您现在的位置：买卖IC网 > PDF目录11540 > 127-0901-801 (Emerson Network Power Connectivity Johnson)CONN ADAPTER FMALE-FMALE BULLET PDF资料下载
参数资料
| 型号： | 127-0901-801 |
| 厂商： | Emerson Network Power Connectivity Johnson |
| 文件页数： | 14/20页 |
| 文件大小： | 0K |
| 描述： | CONN ADAPTER FMALE-FMALE BULLET |
| 产品目录绘图： | 127-0901-801 |
| 特色产品： | SMP Blind-Mate Connectors |
| 标准包装： | 5 |
| 适配器类型： | 插孔至插孔 |
| 适配器系列： | SMP 至 SMP |
| 中心类型： | 母形至母形 |
| 转换源（适配器端）： | SMP 插孔，母插口 |
| 转换到（适配器端）： | SMP 插孔，母插口 |
| 转换类型： | 相同系列 |
| 阻抗： | 50 欧姆 |
| 样式： | 直形 |
| 安装类型： | 自由悬挂 |
| 产品目录页面： | 466 (CN2011-ZH PDF) |
| 其它名称： | J10021 |
Connectivity for
SMP Connectors
Assembly Instructions
ASSEMBLY INSTRUCTIONS
SMP Straight Female Solder Style for .047 OD Semi-Rigid Cable
1 Identify tools (5 piece parts) and connector parts (3 piece parts).
2. Strip cable jacket and dielectric to dimension shown. Do not
nick center conductor. Clean all debris from prepared cable.
3. Insert center conductor into cable stop as shown and place
contact onto center conductor.
4. Insert contact into contact holder fixture and clamp cable in vise.
Tighten stop screw until light pressure is applied between con-
tact, cable stop and cable jacket.
5. Solder contact to center conductor through solder hole using
.016 (0.41) diameter flux core solder wire or solder paste. Use a
minimum amount of solder and heat for a good joint. Do not
allow heat to build up for a long period of time as cable stop
may melt.
6. After solder joint has cooled, remove cable from vise. Remove
any excess solder from contact with a sharp blade and clean all
debris from contact and cable.
7. Insert contact into connector assembly, making sure cable stop
bottoms out against internal shoulder of connector body. Insert
connector assembly into interface location fixture and clamp
cable in vise. Make sure connector assembly is fully engaged
within location fixture. Tighten stop screw until light pressure is
applied between connector assembly and cable stop.
8. Solder end of connector body to cable jacket, using a minimum
amount of solder and heat for a full fillet joint. Allow assembly to
cool before removing connector from vise and location fixture.
Best results are obtained when contact location is flush to .004
(0.10) recessed from reference plane. Interface location fixture
is pre-set at factory, but can be adjusted to control location.
Business-Critical Continuity
Cable Group
MIL-C-17/151, .047 Semi-Rigid
Tool
Cable Vise
Stop Screw
Clamp Inserts
Contact Holder
Interface Location Fixture
14
Part Number
127-0692-001
Part Number
140-0000-962
140-0000-981
140-0000-997
127-0000-902
127-0000-903
相关PDF资料 |
PDF描述 |
|---|---|
| VE-21W-IY-B1 | CONVERTER MOD DC/DC 5.5V 50W |
| VI-B1W-IY-B1 | CONVERTER MOD DC/DC 5.5V 50W |
| PIC16LC56A-04I/SS | IC MCU OTP 1KX12 20SSOP |
| PIC18F44K22T-I/MV | IC MCU 8BIT 16KB FLASH 40UQFN |
| PIC18LF25K22T-I/ML | MCU 32KB FLASH 1536B RAM 28QFN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 127-0901-811 | 功能描述:射频适配器 - 系列之内 Female/Female adapter .769 RoHS:否 制造商:Amphenol Connex 射频系列:SMA 侧1性别:Jack (Female) 侧1极性:Normal 侧2性别:Jack (Female) 侧2极性:Normal 阻抗:50 Ohms 主体类型:Bulkhead 适配器类型:Straight 频率范围:DC to 18 GHz 触点电镀:Gold 外壳电镀:Gold 主体材料:Brass |
| 127-0901-822 | 功能描述:射频适配器 - 系列之内 Male CM/Male FD adapter RoHS:否 制造商:Amphenol Connex 射频系列:SMA 侧1性别:Jack (Female) 侧1极性:Normal 侧2性别:Jack (Female) 侧2极性:Normal 阻抗:50 Ohms 主体类型:Bulkhead 适配器类型:Straight 频率范围:DC to 18 GHz 触点电镀:Gold 外壳电镀:Gold 主体材料:Brass |
| 127091 | 制造商:Brady Corporation 功能描述:B302 10X14 WHT/RED BASEMENT NOT AN EXIT |
| 127091FK940JX0XPY | 制造商:SUYIN-USA 制造商全称:SUYIN-USA 功能描述:Socket AM2 Solder Ball Type |
| 127093 | 制造商:Brady Corporation 功能描述:B401 7X10 BLK/WHT DO NOT BLOCK DOORWAY |
发布紧急采购，3分钟左右您将得到回复。