- 您现在的位置：买卖IC网 > PDF目录11534 > 127-0901-822 (Emerson Network Power Connectivity Johnson)CONN ADAPTER MALE CM-MALE FD PDF资料下载
参数资料
| 型号： | 127-0901-822 |
| 厂商： | Emerson Network Power Connectivity Johnson |
| 文件页数： | 16/20页 |
| 文件大小： | 0K |
| 描述： | CONN ADAPTER MALE CM-MALE FD |
| 特色产品： | SMP Blind-Mate Connectors |
| 标准包装： | 5 |
| 适配器类型： | 插头至插头 |
| 适配器系列： | SMP 至 SMP |
| 中心类型： | 公型至公型 |
| 转换源（适配器端）： | SMP 公形 CM |
| 转换到（适配器端）： | SMP 公形 FD |
| 转换类型： | 相同系列 |
| 阻抗： | 50 欧姆 |
| 样式： | 直形 |
| 安装类型： | 自由悬挂 |
| 产品目录页面： | 466 (CN2011-ZH PDF) |
| 其它名称： | J10031 |
Connectivity for
SMP Connectors
Assembly Instructions
SMP Straight Female Solder Style for .086 OD Semi-Rigid Cable
1. Identify tools (6 piece parts) and connector parts (2 piece parts).
2. Strip cable jacket and dielectric to dimension shown. Do not
nick center conductor. Clean all debris from prepared cable.
3. Place contact onto center conductor, insert solder shim between
cable jacket and contact.
4. Insert contact into contact holder fixture and clamp cable in vise.
Tighten stop screw until light pressure is applied between con-
tact, solder shim and cable jacket.
5. Solder contact to center conductor through solder hole using
.016 (0.41) diameter flux core solder wire or solder paste. Use a
minimum amount of solder and heat for a good joint. Do not
allow heat to build up for a long period of time as cable dielectric
will expand.
6. After solder joint has cooled, remove solder shim and cable from
vise. Remove any excess solder from contact with a sharp blade
and clean all debris from contact and cable.
7. Insert contact into connector assembly, making sure cable
jacket bottoms out against internal shoulder of connector body.
Insert connector assembly into interface location fixture and
clamp cable in vise. Make sure connector assembly is fully en-
gaged within location fixture. Tighten stop screw until light pres-
sure is applied between connector assembly and cable jacket.
8. Solder end of connector body to cable jacket, using a minimum
amount of solder and heat for a full fillet joint. Allow assembly to
cool before removing connector from vise and location fixture.
Best results are obtained when contact location is flush to .004
(0.10) recessed from reference plane. Interface location fixture
is pre-set at factory, but can be adjusted to control location.
Business-Critical Continuity
Cable Group
RG-405, .086 Semi-Rigid
Tool
Cable Vise
Stop Screw
Clamp Inserts
Solder Shim
Contact Holder
Interface Location Fixture
16
Part Number
127-0693-001
Part Number
140-0000-962
140-0000-981
140-0000-964
140-0000-984
127-0000-902
127-0000-903
相关PDF资料 |
PDF描述 |
|---|---|
| VI-BWT-IY-B1 | CONVERTER MOD DC/DC 6.5V 50W |
| 127-1901-822 | CONN ADAPTER MALE CM-MALE LD |
| 127-2901-822 | CONN ADAPTER MALE CM-MALE SB |
| VI-BWR-IY-B1 | CONVERTER MOD DC/DC 7.5V 50W |
| MS-145-HRMP-A | CONN ADAPT MS-145/SMA MALE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 127091 | 制造商:Brady Corporation 功能描述:B302 10X14 WHT/RED BASEMENT NOT AN EXIT |
| 127091FK940JX0XPY | 制造商:SUYIN-USA 制造商全称:SUYIN-USA 功能描述:Socket AM2 Solder Ball Type |
| 127093 | 制造商:Brady Corporation 功能描述:B401 7X10 BLK/WHT DO NOT BLOCK DOORWAY |
| 127096 | 制造商:Brady Corporation 功能描述:B401 10X14 BLK/WHT DO NOT BLOCK DOORWAY |
| 1270960000 | 制造商:Weidmuller 功能描述:SLA 19/180B 3.2SN OG -EA - Bag |
发布紧急采购，3分钟左右您将得到回复。