- 您现在的位置：买卖IC网 > PDF目录11600 > 138-4407-107 (Emerson Network Power Connectivity Johnson)CONN PLUG N R/A CRIMP RG-58/U PDF资料下载
参数资料
| 型号： | 138-4407-107 |
| 厂商： | Emerson Network Power Connectivity Johnson |
| 文件页数： | 19/24页 |
| 文件大小： | 0K |
| 描述： | CONN PLUG N R/A CRIMP RG-58/U |
| 产品目录绘图： | 138 Series Plug Right Angle |
| 标准包装： | 25 |
| 系列： | N 型 |
| 连接器类型： | N 型 |
| 连接器类型： | 插头，公引脚 |
| 触点终端： | 压接和焊接 |
| 阻抗： | 50 欧姆 |
| 安装类型： | 自由悬挂，直角 |
| 紧固型： | 有螺纹 |
| 缆线组： | RG-58，141，303 |
| 频率 - 最大： | 11GHz |
| 包装： | 散装 |
| 产品目录页面： | 471 (CN2011-ZH PDF) |
| 其它名称： | J848 |
Connectivity....for
Business-Critical Continuity
Type N Bulkhead Jack Crimp Style for RG-316 and
316DS Flexible Cable
1. Identify connector parts (6 piece parts).
2. Strip cable to dimensions shown. Do not nick center
conductor. A wire stripper of correct size is recommended
for this step. Tin center conductor if contact will be solder
attached. Do not tin center conductor if contact will be crimp
attached. Slide crimp sleeve onto jacket of cable.
3. Assemble rear contact onto cable as shown. Rear contact
should butt against cable dielectric during attachment.
Solder Attachment: Solder rear contact to center conductor
through solder hole using .020 (.051) diameter flux core solder
wire. Use a minimum amount of solder for a good joint.
Crimp Attachment: Crimp rear contact to center conductor
using Johnson indent hand tool 140-0000-970. Crimp location
should be centered between end of rear contact and solder
hole using positioning tool 140-0000-971. Crimp attachment to
solid center conductor cables is not recommended.
4. Flare braid and slide bulkhead jack connector assembly over
rear contact and under braid. Rear contact must engage fully
with internal captivated jack contact. Cable jacket should be
located near end of crimp stem when contacts are fully
engaged.
5. Arrange braid uniformly around crimp stem. Slide crimp
sleeve forward and crimp using Johnson ergonomic hand
crimp frame 140-0000-967 with recommended hex size die set.
Maintain forward pressure on cable while crimping.
6. Add gasket, lock washer and mounting nut when installing
connector to panel.
Type N Connectors
Cable Group
RG-316/U, 161, 174, 188
RG-316 DS, 188 DS
Part No.
138-4303-407
138-4304-407
Crimp Sleeve Hex Size
.128 (3.25)
.151 (3.84)
Contact Crimp
8 INDENT
8 INDENT
Assembly
Tool
Crimp Frame
Die Set
Contact Tool
Positioner
138-4303/4304-407
140-0000-967
140-0000-990
140-0000-970
140-0000-971
19
相关PDF资料 |
PDF描述 |
|---|---|
| D38999/24MJ24SN | CONN RCPT 24POS JAM NUT W/SCKT |
| 138-4418-107 | CONN PLUG N R/A CRIMP RG-214 |
| 138-4308-407 | CONN JACK N STR CRIMP RG-142 |
| D38999/26FG75PA | CONN PLUG 4POS STRAIGHT W/PINS |
| 138-4307-407 | CONN JACK N STR CRIMP RG-58/U |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 138-4408-007 | 功能描述:RF 连接器 STR CRIMP PLUG SOLDER OR CRIMP CONT RoHS:否 制造商:Bomar Interconnect 产品:Connectors 射频系列:BNC 型式:Jack (Female) 极性: 触点电镀:Gold 阻抗: 端接类型:Solder 主体类型:Straight Bulkhead 电缆类型: |
| 138-4408-107 | 功能描述:RF 连接器 RA CRIMP PLUG CAPTIVATED CONTACT RoHS:否 制造商:Bomar Interconnect 产品:Connectors 射频系列:BNC 型式:Jack (Female) 极性: 触点电镀:Gold 阻抗: 端接类型:Solder 主体类型:Straight Bulkhead 电缆类型: |
| 13-8441-113MA | 制造商:3M Electronic Products Division 功能描述:TOUCHSCREEN |
| 13-8441-121MA | 制造商:3M Electronic Products Division 功能描述:20.65" TCHSCRN W/SER CNTROLLER |
| 13844128 | 功能描述:汽车连接器 CONN HD-V 24W F BLACK PBT RoHS:否 制造商:Amphenol SINE Systems 产品:Contacts 系列:ATP 位置数量: 型式:Female 安装风格: 端接类型: 触点电镀:Nickel |
发布紧急采购，3分钟左右您将得到回复。