- 您现在的位置：买卖IC网 > PDF目录11697 > 138-4416-007 (Emerson Network Power Connectivity Johnson)CONN PLUG N STR CRIMP RG-213 PDF资料下载
参数资料
| 型号： | 138-4416-007 |
| 厂商： | Emerson Network Power Connectivity Johnson |
| 文件页数： | 21/24页 |
| 文件大小： | 0K |
| 描述： | CONN PLUG N STR CRIMP RG-213 |
| 产品目录绘图： | 138 Series Plug Straight |
| 标准包装： | 25 |
| 系列： | N 型 |
| 连接器类型： | N 型 |
| 连接器类型： | 插头，公引脚 |
| 触点终端： | 压接和焊接 |
| 阻抗： | 50 欧姆 |
| 安装类型： | 自由悬挂 |
| 紧固型： | 有螺纹 |
| 缆线组： | RG-8，213 |
| 频率 - 最大： | 11GHz |
| 包装： | 散装 |
| 产品目录页面： | 471 (CN2011-ZH PDF) |
| 其它名称： | J842 |
Connectivity....for
Business-Critical Continuity
Type N Connectors
Type N Bulkhead Jack Solder Style for Semi-Rigid Cable
1. Identify connector parts (8 piece parts) and tools (4 piece parts).
2. Strip cable jacket and dielectric to dimension shown. Do not nick
center conductor. Clean all debris from cable.
3. Slide stem over cable jacket, keeping stem correctly oriented to end
of cable.
4. Insert jack contact into rear insulator. Make sure insulator is
correctly oriented to contact. Place jack contact and rear insulator
onto center conductor, keeping insulator correctly oriented between
cable jacket and contact.
5. Slide stem away from jack contact. Insert contact into stop screw
and clamp cable in vise. Tighten stop screw until light pressure is
applied between jack contact, rear insulator and cable jacket.
6. Solder jack contact to center conductor through solder hole using
.020 (.051) diameter flux core solder wire. Use a minimum amount of
solder for a good joint.
7. After solder joint has cooled, remove cable from vise and remove
any excess solder from jack contact with a sharp blade and clean
all debris from contact and rear insulator.
8. Slide stem over rear insulator and tighten stem into location fixture
until stem bottoms out.
9. Insert cable into vise, but do not clamp. Insert jack contact into stop
screw and tighten location fixture until stop screw bottoms out.
Clamp cable in vise.
10. Solder stem to cable jacket, using a minimum amount of solder for a
full fillet joint. Allow assembly to cool before removing from vise.
11. After solder joint has cooled, un-clamp cable and remove location
fixture from stop screw and cable assembly. Insert front insulator
into bulkhead jack body. Insert cable assembly into body and tighten
to 25-30 in-lbs.
12. Add gasket, lock washer and mounting nut when installing
connector to panel.
21
相关PDF资料 |
PDF描述 |
|---|---|
| D38999/26FE8SC | CONN PLUG 8POS STRAIGHT W/SCKT |
| U.FL-R-1 | CONN TEST RECEPTACLE |
| D38999/26FE8SB | CONN PLUG 8POS STRAIGHT W/SCKT |
| D38999/26WE8SB | CONN PLUG 8POS STRAIGHT W/SCKT |
| CS3100A-36-78P | CONN RCPT 14POS WALL MNT W/PINS |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 138-4416-107 | 功能描述:RF 连接器 RA CRIMP PLUG CAPTIVATED CONTACT RoHS:否 制造商:Bomar Interconnect 产品:Connectors 射频系列:BNC 型式:Jack (Female) 极性: 触点电镀:Gold 阻抗: 端接类型:Solder 主体类型:Straight Bulkhead 电缆类型: |
| 138-4418-007 | 功能描述:RF 连接器 STR CRIMP PLUG SOLDER OR CRIMP CONT RoHS:否 制造商:Bomar Interconnect 产品:Connectors 射频系列:BNC 型式:Jack (Female) 极性: 触点电镀:Gold 阻抗: 端接类型:Solder 主体类型:Straight Bulkhead 电缆类型: |
| 138-4418-107 | 功能描述:RF 连接器 RA CRIMP PLUG CAPTIVATED CONTACT RoHS:否 制造商:Bomar Interconnect 产品:Connectors 射频系列:BNC 型式:Jack (Female) 极性: 触点电镀:Gold 阻抗: 端接类型:Solder 主体类型:Straight Bulkhead 电缆类型: |
| 138-44311 | 制造商:GAMEWELL-FCI 制造商全称:GAMEWELL-FCI 功能描述:Mini-Annunciators Back-Lit |
| 13844326 | 功能描述:汽车连接器 CONN HD-V 40W F BLACK PBT RoHS:否 制造商:Amphenol SINE Systems 产品:Contacts 系列:ATP 位置数量: 型式:Female 安装风格: 端接类型: 触点电镀:Nickel |
发布紧急采购，3分钟左右您将得到回复。