- 您现在的位置：买卖IC网 > PDF目录140809 > 13FDZ-BT (J S T MFG CO LTD) 13 CONTACT(S), FEMALE, STRAIGHT FFC/FPC CONNECTOR, SOLDER PDF资料下载
参数资料
| 型号： | 13FDZ-BT |
| 厂商： | J S T MFG CO LTD |
| 元件分类： | SMT连接器& FFC/FPC |
| 英文描述： | 13 CONTACT(S), FEMALE, STRAIGHT FFC/FPC CONNECTOR, SOLDER |
| 文件页数： | 1/3页 |
| 文件大小： | 93K |
| 代理商： | 13FDZ-BT |
421
The FDZ connector, a Zero Insertion Force
(ZIF) connector, was developed to connect
FPC and membrane switch leads. This
combination of features allows greater
freedom in internal wiring designs. No
force is required to insert the leads. Once
inserted, the leads are securely held and
locked by moving the slide. The contact is
double-sided to ensure greater reliability.
Features ––––––––––––––––––––––––
Double-sided contact
The contact is double-sided, thus providing redundant and highly
reliable contact with FPC and membrane switch leads. This allows
greater freedom in specifying the membrane switch lead conducting
surfaces for use in keyboards.
Zero insertion force and locking mechanism
A ZIF mechanism increases wear resistance and extends the
connector's mating life. The leads are securely connected by simply
moving the slide. This greatly reduces the damage to the conducting
surfaces of the leads. This mechanism is therefore ideal for silver-paste
carbon-printed pattern leads which are susceptible to wear.
The slide also has a hook to ensure secure contact and a tight hold.
Temporary board retention feature
The contact solder tail has a board retention feature that allows the
connector to be temporarily held on the printed circuit board while it is
being soldered. As a result, the connector can be located accurately
in the finished product.
Boss for polarity identification
A boss (projection) on the bottom of the housing prevents improper
insertion in the printed circuit board and provides greater mounting
stability.
Flux is not a problem
The bottom of the connector housing is raised 2.0mm (.079") from the
surface of the printed circuit board. This prevents flux being trapped
under the connector. In addition, the central section of the contact
has a special form that prevents flux from rising into the connector
due to capillary action.
Caution: Flux level should be lower than the printed circuit board.
Specifications –––––––––––––––––––
Current rating:
Tin-plated copper foil lead/1.0A AC, DC
Silver paste carbon-pinted lead/50mA AC, DC
Voltage rating:
250V AC, DC
Temperature range: -40C to +85C
(including temperature rise in applying
electrical current)
Contact resistance: <Tin-plated copper foil lead>
lnitial value/30m max.
After environmental testing/40m max.
<Silver paste carbon-printed lead>
lnitial value/10 max.
After environmental testing/15 max.
Insulation resistance:
1,000M min.
Withstanding voltage:
1,200V AC/minute
Applicable FPC and membrane switch lead:
Lead pitch/2.54mm(.100")
Lead width/1.3mm(.051")
Mating part thickness/125 micron(.005")
Applicable PC board thickness: 1.6mm(.063")
<Note>FPC to be actually used should be checked for applicability.
* Contact JST for details.
Standards ––––––––––––––––––––––
0RecognizedE60389
1CertifiedLR20812
FDZ CONNECTOR
Connectors for FPC and membrane switch leads
2.54mm
(.100") pitch
相关PDF资料 |
PDF描述 |
|---|---|
| 13FDZ-ST | 13 CONTACT(S), FEMALE, RIGHT ANGLE FFC/FPC CONNECTOR, SOLDER |
| 1-531592-1 | 29 CONTACT(S), FEMALE, TWO PART BOARD CONNECTOR, RECEPTACLE |
| 1-103325-0 | 10 CONTACT(S), MALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, SOLDER |
| 1-103325-1 | 11 CONTACT(S), MALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, SOLDER |
| 1-103325-2 | 12 CONTACT(S), MALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, SOLDER |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 13FDZ-ST(LF)(SN) | 制造商:JST Manufacturing 功能描述:FDZ Series 13 Position 2.54 mm Pitch Side Entry FPC Connector |
| 13FDZ-ST(S)(LF)(SN) | 制造商:JST Manufacturing 功能描述:CONN WIRE TO BRD 2.54MM RA 13POS 制造商:JST Manufacturing 功能描述:13 Position 2.54 mm Side Entry ZIF FPC Connector 制造商:JST Manufacturing 功能描述:Connector,FPC,ZIF,2.54mm,Side,13P |
| 13FE-BT-VK-N | 制造商:JST Manufacturing 功能描述:Connector,FFC,1.25mm,Top,13P |
| 13FE-ST-VK-N | 制造商:JST Manufacturing 功能描述:Connector,FFC,1.25mm,Side,13P |
| 13FLZ-RSM1-TB | 功能描述:CONN FFC/FPC 13POS .5MM REV SMD RoHS:否 类别:连接器，互连式 >> FFC，FPC（扁平软线）- 连接器 - 面板安装 系列:FLZ 标准包装:1 系列:Easy-On™ 54809 连接器类型:底部触点 位置数:31 间距:0.012"（0.30mm） FFC，FCB 厚度:0.20mm 板上方高度:0.051"（1.30mm） 安装类型:表面贴装，直角 线缆端类型:直形 端子:焊接 锁定功能:触发锁 特点:零插入力（ZIF） 包装:Digi-Reel® 触点表面涂层:锡铋 触点涂层厚度:- 工作温度:-20°C ~ 85°C 额定电流:0.300A 额定电压:50V 体座材料:液晶聚合物（LCP） 其它名称:WM6540DKR |
发布紧急采购，3分钟左右您将得到回复。