参数资料
型号: 142-9407-104
厂商: Emerson Network Power Connectivity Johnson
文件页数: 24/32页
文件大小: 0K
描述: CONN SMA PLUG R/A RG-58 SILVER
标准包装: 50
系列: SMA
连接器类型: SMA
连接器类型: 插头,公引脚
触点终端: 压接和焊接
阻抗: 50 欧姆
安装类型: 自由悬挂,直角
紧固型: 有螺纹
缆线组: RG-58,141
频率 - 最大: 12.4GHz
特点: 无磁
包装: 散装
MCX Non-Magnetic RF Connectors
Assembly Instructions
MCX Crimp Type Straight Connectors for Flexible Cable
1. Identify connector parts. (3 piece parts)
2. Strip cable to dimensions shown. Do not nick braid or center conductor. Tin
center conductor if contact is to be solder attached. Do not tin center
conductor if contact is to be crimp attached. Slide heat shrink (as
applicable) and crimp sleeve onto jacket of cable.
3. Assemble contact onto cable as shown.
Solder attachment. Solder contact to center conductor through solder hole
using .020 (0.51) diameter solder. Use a minimum of solder for a good joint.
Crimp attachment. Crimp contact to center conductor using a miniature 8
indent tool 140-0000-970 with positioner 140-0000-971. Crimp location
should be centered between end of contact and cross hole. Crimp
attachment to solid center conductor cable is not recommended.
4. Flair braid and slide body assembly over contact and under braid. Then
seat body assembly firmly onto contact. (RG-178 is non-captivated, RG-316
incorporates snap-fit captivation.) The cable may have to be held in a
clamping fixture. Arrange braid uniformly around crimp stem. Slide crimp
sleeve forward and crimp using recommended crimp tool. Slide heat shrink
forward and shrink (as applicable).
Connectivity for
Business-Critical Continuity
Cable Group
RG-316/U, 188, 174
RG-316 DS, 188 DS
Part No.
133-9403-001
133-9404-001
Crimp Die Hex
.128 (3.25)
.151 (3.83)
MCX Crimp Type Right Angle Plugs for Flexible Cable
1. Identify connector parts. (4 piece parts).
2. Strip cable to dimensions shown. Do not nick braid or center conductor. A
wire stripper of correct size is recommended for this step. Twist stranded
center conductor into tight bundle and tin (optional). Slide crimp sleeve
onto cable as shown.
3. Flare braid and slide cable into body making certain that the cable
dielectric bottoms against center contact. Solder: Solder center conductor
to contact through the side access ports and hole in center contact. Use a
minimum amount of solder for a full fillet joint. .015 ( 0.38) diameter solder is
recommended . Crimp: Crimp Contact Attachment Crimp contact using
41-0000-924 dieset in 144-0000-900 tool frame.
4. Arrange braid uniformly around crimp stem. Slide crimp sleeve over braid
and access ports. Crimp securely using recommended hex size and crimp
tool.
Cable Group
RG-316/U, 188, 174
RG-316 DS, 188 DS
RG-178
24
Part No.
133-9403-101/104
133-9404-101
133-9402-101
Crimp Die Hex
.128(3.25)
.151(3.83)
.105(2.67)
相关PDF资料
PDF描述
141-0308-412 CONN JACK SMA BLKHD CRIMP RG-142
DS100BR111SQ/NOPB IC REPEATER 10.3GBPS 2CH 24LLP
D38999/26FJ7SA CONN PLUG 99POS STRAIGHT W/SCKT
D38999/24JJ19PN CONN RCPT 19POS JAM NUT W/PINS
ISL33003IRTZ IC BUS BUFF HOTSWAP 2WR 8TDFN
相关代理商/技术参数
参数描述
1429-4103 功能描述:薄膜电容器 400V .01uF 10% Tol MPP RoHS:否 制造商:Cornell Dubilier 产品类型: 电介质:Polyester 电容:0.047 uF 容差:10 % 电压额定值:100 V 系列:225P 工作温度范围:- 55 C to + 85 C 端接类型:Radial 引线间隔:9.5 mm
1429-4103-TB 功能描述:薄膜电容器 400V .01uF TAPE&BOX RoHS:否 制造商:Vishay/BC Components 产品类型: 电介质: 电容: 容差: 电压额定值: 系列: 工作温度范围: 端接类型: 引线间隔:
1429-4104 功能描述:薄膜电容器 400V .1uF 10% Tol MPP RoHS:否 制造商:Cornell Dubilier 产品类型: 电介质:Polyester 电容:0.047 uF 容差:10 % 电压额定值:100 V 系列:225P 工作温度范围:- 55 C to + 85 C 端接类型:Radial 引线间隔:9.5 mm
1429415 功能描述:电缆组件 SAC-4P-MINMS/30.0 -960 VAL RoHS:否 制造商:Molex 产品:Power Assemblies 类型:Cable Assembly 连接器端口 A:No Connector 连接器端口 A 管脚计数:4 连接器端口 B:No Connector 连接器端口 B 管脚计数: 型式:Male 线规 - 美国线规(AWG):20, 28 长度:0.305 m 颜色:Black, Red
1429428 功能描述:电缆组件 SAC-4P-MINMS/40.0 -960 VAL RoHS:否 制造商:Molex 产品:Power Assemblies 类型:Cable Assembly 连接器端口 A:No Connector 连接器端口 A 管脚计数:4 连接器端口 B:No Connector 连接器端口 B 管脚计数: 型式:Male 线规 - 美国线规(AWG):20, 28 长度:0.305 m 颜色:Black, Red