参数资料
型号: 162GB-36T14-12SW(416)
厂商: AMPHENOL CORP
元件分类: MIL系列连接器
英文描述: 12 CONTACT(S), FEMALE, MIL SERIES CONNECTOR, CRIMP, PLUG
文件页数: 25/41页
文件大小: 1731K
代理商: 162GB-36T14-12SW(416)
31
Interconnection Accessories
INSTALLATION - PROCEDURE
Prepare the cable making sure that a sufficient length of shield is available, so that it fits against the front shoulder of the lip groove.
Before insertion of connector contacts, slide the heat-shrinkable connector boot onto the cable followed by the Spring Adapter.
Position the heatshrinkable boot, Spring Adapter, and shield braid out of the way and insert the connector contacts.
Depending upon the shielding braid size, it can either be folded back onto itself or bunched up concertina style out of the way
for easy access to the cable conductors.
Screw the Spring Adapter onto the connector and tighten to the torque value specified by the connector manufacturer. Typical
torque values are shown in table on Page 7. It is recommended that the connector threads are lubricated with a suitable
compound if a liquid thread lock is not used. The adapter should be hand tightened to ensure proper thread alignment and
then tightened with a strap wrench and torque meter to the specified torque.
Bring the cable shield braid up onto the adapter body so that it fits against the front shoulder of the lip groove. Alternatively
extend the braid past the lip groove.
NOTE: After assembly, braid can be trimmed with side cutters
or folded back and secured with high temperature tape
Open up the constant force spring and wrap it around the cable braid section that is positioned over the constant force spring
slot area of the adapter. This is most easily accomplished by lifting up the end of the spring and trapping the braid covered
adapter between the spring coil and raised end. The spring will now stay in place and can be installed by simply rolling the
coil around the braid covered adapter. Refer to appropriate code of practice for procedure to install heatshrink shape.
Lift Up End of Spring
Trap Braid Covered Adapter
between Spring Coil and raised
end
Roll Spring Coil around
Adapter
Secure Cable Braid
End with Tape
Fold Cable Braid back
相关PDF资料
PDF描述
162GB-36T14-12SW(608) 12 CONTACT(S), FEMALE, MIL SERIES CONNECTOR, CRIMP, PLUG
162GB-36T14-12SW(714) 12 CONTACT(S), FEMALE, MIL SERIES CONNECTOR, CRIMP, PLUG
162GB-36T14-12SX(416) 12 CONTACT(S), FEMALE, MIL SERIES CONNECTOR, CRIMP, PLUG
162GB-36T14-12SX(608) 12 CONTACT(S), FEMALE, MIL SERIES CONNECTOR, CRIMP, PLUG
162GB-36T14-12SX(714) 12 CONTACT(S), FEMALE, MIL SERIES CONNECTOR, CRIMP, PLUG
相关代理商/技术参数
参数描述
162GB36T1412SW608 功能描述:环形MIL规格连接器 12P STRT SOCKET PLUG MINI BAYONET SIZE 14 RoHS:否 制造商:Amphenol MIL 类型:MIL-DTL-5015 系列:97 产品类型:Receptacles 外壳大小:28 外壳类型:Potting 触点类型:Socket (Female) 位置/触点数量:14 插入安排:28-2 触点材料:Copper Alloy 触点电镀:Silver 安装角:Straight 安装风格:Wire 端接类型:Solder 电流额定值:
162GB36T1412SW714 功能描述:环形MIL规格连接器 12P STRT SOCKET PLUG MINI BAYONET SIZE 14 RoHS:否 制造商:Amphenol MIL 类型:MIL-DTL-5015 系列:97 产品类型:Receptacles 外壳大小:28 外壳类型:Potting 触点类型:Socket (Female) 位置/触点数量:14 插入安排:28-2 触点材料:Copper Alloy 触点电镀:Silver 安装角:Straight 安装风格:Wire 端接类型:Solder 电流额定值:
162GB36T1412SX 功能描述:环形MIL规格连接器 12P STRT SOCKET PLUG MINI BAYONET SIZE 14 RoHS:否 制造商:Amphenol MIL 类型:MIL-DTL-5015 系列:97 产品类型:Receptacles 外壳大小:28 外壳类型:Potting 触点类型:Socket (Female) 位置/触点数量:14 插入安排:28-2 触点材料:Copper Alloy 触点电镀:Silver 安装角:Straight 安装风格:Wire 端接类型:Solder 电流额定值:
162GB36T1412SX044 功能描述:环形MIL规格连接器 12P STRT SOCKET PLUG MINI BAYONET SIZE 14 RoHS:否 制造商:Amphenol MIL 类型:MIL-DTL-5015 系列:97 产品类型:Receptacles 外壳大小:28 外壳类型:Potting 触点类型:Socket (Female) 位置/触点数量:14 插入安排:28-2 触点材料:Copper Alloy 触点电镀:Silver 安装角:Straight 安装风格:Wire 端接类型:Solder 电流额定值:
162GB36T1412SX044416 功能描述:环形MIL规格连接器 12P STRT SOCKET PLUG MINI BAYONET SIZE 14 RoHS:否 制造商:Amphenol MIL 类型:MIL-DTL-5015 系列:97 产品类型:Receptacles 外壳大小:28 外壳类型:Potting 触点类型:Socket (Female) 位置/触点数量:14 插入安排:28-2 触点材料:Copper Alloy 触点电镀:Silver 安装角:Straight 安装风格:Wire 端接类型:Solder 电流额定值: