- 您现在的位置：买卖IC网 > PDF目录18602 > 1643921-1 (TE Connectivity)TOOL INSERTION/REMOVAL SIZE #0 PDF资料下载
参数资料
| 型号： | 1643921-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 1/2页 |
| 文件大小： | 0K |
| 描述： | TOOL INSERTION/REMOVAL SIZE #0 |
| 产品培训模块： | ELCON Power Drawer Series Connectors |
| 标准包装： | 250 |
| 系列： | ELCON |
| 工具类型： | 插入/拔出工具 |
| 适用于相关产品： | 圆形连接器触点 |
| 产品目录页面： | 494 (CN2011-ZH PDF) |
| 其它名称： | A36313 |
2. Place the wire over the slot in the tool tip. Apply
light pressure on the wire until the tip spreads and
allows the wire to enter the tip.
3. Align the contact and tool tip with the desired
connector contact cavity.
4. Hold the wire against the serrations in the tool
handle, and push the tool straight into the contact
cavity until the contact bottoms.
5. Remove the tool from the contact. Pull back
lightly on the wire to make sure that the contact is
secure in the cavity.
1. Align the tool tip with the desired connector
contact cavity.
2. Gently push the tool tip straight into the contact
cavity and over the contact wire barrel until it butts
against the shoulder of the contact.
3. Place the wire over the slot in the tool tip. Apply
light pressure on the wire until the tool tip spreads
Figure 1
Insertion/Extraction Tools are designed to remove
Drawer and Domino Series crimp type and threaded
contacts from connectors. Each tool is color coded for
the purpose of the tool and the size of the contact.
See Figure 1. Read these instructions carefully before
inserted or removing any contacts.
The tool consists of a plastic handle, and two plastic
insertion tips each with a slot. When properly inserted
into the connector contact cavity, the tool tip fits
between the contact wire barrel and the connector
retention clips, and supports the wire to allow the
contact to be inserted into or removed from the
connector.
1. Slide the contact wire barrel into the end of the
tool tip until the tip butts against the shoulder of the
contact.
and allows the wire to enter the tip.
4. Hold the wire against the serrations in the tool
handle, and gently pull back. Tool 1643914–1,
1643921–1, and 1643922–1 do not have
serrations.
Figure 2
相关PDF资料 |
PDF描述 |
|---|---|
| 1643922-1 | TOOL INSERTION/REMOVAL SIZE #4 |
| FQD10N20CTF | MOSFET N-CH 200V 7.8A DPAK |
| GLAA20B | SWITCH TOP PLUNGER SNAP DPDT |
| 1643915-1 | TOOL INSERTION/REMOVAL SIZE #12 |
| GLAB01A1A | SWITCH SIDE-ROTRY ROLL SNAP SPDT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 1643922-1 | 功能描述:手工工具 INSERT/REMOVAL SZ #4 RoHS:否 制造商:Molex 产品:Extraction Tools 类型: 描述/功能:Extraction tool |
| 1643924-1 | 制造商:TE Connectivity 功能描述:902-0118-00100 599-521 - Bulk |
| 1643925-1 | 制造商:TE Connectivity 功能描述:901-0146-00100B 599-532 - Bulk |
| 1643930000 | 功能描述:CONN HDR 3.5MM 14POS 135 BLK RoHS:是 类别:连接器，互连式 >> 接线座 - 接头，插头和插口 系列:Omnimate SL 标准包装:50 系列:Omnimate SL 端接块类型:接头，公引脚，带罩（4 面） 每电平位置:11 间距:0.138"（3.50mm） 级别数目:1 接头定向:90°，直角 插头导线入口:- 端子:焊接 线规:- 电流:10A 电压:300V 安装类型:通孔 特点:法兰 颜色:黑 包装:散装 其它名称:SL3.5/90/11F BK |
| 1643940000 | 功能描述:CONN HDR 3.5MM 15POS 135 BLK RoHS:是 类别:连接器，互连式 >> 接线座 - 接头，插头和插口 系列:Omnimate SL 标准包装:50 系列:Omnimate SL 端接块类型:接头，公引脚，带罩（4 面） 每电平位置:11 间距:0.138"（3.50mm） 级别数目:1 接头定向:90°，直角 插头导线入口:- 端子:焊接 线规:- 电流:10A 电压:300V 安装类型:通孔 特点:法兰 颜色:黑 包装:散装 其它名称:SL3.5/90/11F BK |
发布紧急采购，3分钟左右您将得到回复。