参数资料
型号: 172333-1
厂商: TE Connectivity
文件页数: 3/12页
文件大小: 0K
描述: CONN RCPT/CAP 12POS MINI-UMNL
RoHS指令信息: 172333-1 Statement of Compliance
3D 型号: 172333-1.pdf
标准包装: 12,500
系列: 迷你通用 MATE-N-LOK
连接器类型: 插座
触点类型:: 公形或母形
位置数: 12
间距: 0.163"(4.14mm)
行数: 3
行间距: 0.163"(4.14mm)
安装类型: 面板安装,卡入式
触点终端: 压接
紧固型: 锁销滑道
颜色: 自然色
包装: 散装
请注意: 不提供触点
配套产品: 1-172170-2-ND - CONN PLUG HOUSING 12POS .163"
A106637-ND - CONN PLUG 12POS MINI-MATE-N-LOK
A25703-ND - CONN PLUG 12POS MINI UNIV-MATE
相关产品: A97685TR-ND - CONN PIN 22-26AWG MINI U MNL TIN
A100437CT-ND - CONN SOCKT 20-16AWG MINI-UMNL AU
A100438CT-ND - CONN SOCKT 20-16AWG MINI-UMNL AU
A100828CT-ND - CONN SOCKET 20-16AWG M-UNML TIN
A100438TR-ND - CONN SOCKT 20-16AWG MINI-UMNL AU
A100437TR-ND - CONN SOCKT 20-16AWG MINI-UMNL AU
A100436TR-ND - CONTACT PIN 16-20AWG MINI-UMNL
1-770988-1-ND - CONTACT SKT 18-22AWG MINI-UMNL
A100430TR-ND - CONTACT SKT 18-22AWG MINI-UMNL
1-770903-1-ND - CONTACT PIN 18-22AWG MINI-UMNL
更多...
其它名称: Q793128
114-- 16017
3.2. Contact Crimp Requirements
A. Carrier Cutoff
There shall be no burrs on the cutoff tab. The carrier cutoff tab length shall not exceed the dimension
given in Figure 2.
B. Crimp Height
The insulation barrel shall be formed around but not cut into the wire insulation. The wire barrel and
insulation barrel crimp height and width is given in Figure 2.
NOTE
i
The applied crimp dimension (within the function range of the product) is dependent on the termination tooling being
used. Refer to the documentation (applicator logs and instruction sheets) supplied with the termination tooling for the
applied crimp height.
C. Contact Stop
The contact stop must not be crimped. Any deformation to the contact stop will compromise the insertion
depth of the contact in the contact cavity of the housing.
D. Front and Rear Bellmouths
The front bellmouth shall be visible. The rear bellmouth shall conform to the dimensions given in Figure 2.
E. Wire Location
The end of the wire shall be flush with the end of the wire barrel or protrude no more than the dimension
given in Figure 2.
F. Locking Lances
The locking lances shall not be deformed.
Note: All requirements apply to both pin
and socket contact.
Locking Lances Not Deformed
Stack Wires as Shown
For 2--Wire Crimping
Wire Barrel
Locking Lances Not Deformed
Rev L
Contact Requirements
Wire Strands and Insulation
Both Visible in This Area
Contact Stop Not
Crimped or Deformed
End of Wire Flush With
End of Wire Barrel or
0.88 [.035] (Max) Wire Length
Front Bellmouth Visible
Contact Stop Not
Crimped or Deformed
0.25 [.010] Max Flash
0.50 [.020] Cutoff Tab Length
Figure 2 (Cont’d)
Insulation Barrel Formed
Around But Not Cutting
into Wire Insulation
Wire Barrel Seam Closed With
No Strands Protruding or Showing
0.10--0.51 [.004--.020] (Applicator)
0.10 [.004] Min (Hand Tool)
Rear Bellmouth
No Burrs on Cutoff Tab
3 of 12
相关PDF资料
PDF描述
591202B00000G HEATSINK TO-220 HORZ MOUNT BLK
103688-4 CONN RCPT HSG 5POS .100 UNLOADED
573300D00010G HEATSINK D-PAK .4" HIGH SMD
MT3B3024 RELAY GEN PURPOSE 3PDT 4A 24V
1376477-6 CONN PLUG HOUSING 2.5MM 6POS
相关代理商/技术参数
参数描述
1723340 功能描述:可插拔接线端子 MVSTBR 2.5/ 4-ST 5.08 BK AU RoHS:否 制造商:Phoenix Contact 产品:Plugs 系列:PTS 端接类型:Spring Cage 位置/触点数量:5 线规量程:26-14 节距:5 mm 电流额定值:10 A 电压额定值:250 V 安装风格: 安装角: 触点电镀:
172334-1 功能描述:管脚和插座连接器 UNIV M-N-L HSG RoHS:否 制造商:Molex 系列:1561 产品类型:Contacts 触点类型:Socket (Female) 节距: 位置/触点数量: 排数: 安装风格:Wire 端接类型:Crimp 外壳材料: 触点材料:Brass 触点电镀:Tin 电压额定值: 电流额定值:
172335-1 功能描述:管脚和插座连接器 1 POS PLUG MINI RoHS:否 制造商:Molex 系列:1561 产品类型:Contacts 触点类型:Socket (Female) 节距: 位置/触点数量: 排数: 安装风格:Wire 端接类型:Crimp 外壳材料: 触点材料:Brass 触点电镀:Tin 电压额定值: 电流额定值:
172335-1 制造商:TE Connectivity 功能描述:Plug and Socket Connector Housing 制造商:TE Connectivity 功能描述:PLUG AND SOCKET CONNECTOR HOUSING
172336 功能描述:RF 连接器 RoHS:否 制造商:Bomar Interconnect 产品:Connectors 射频系列:BNC 型式:Jack (Female) 极性: 触点电镀:Gold 阻抗: 端接类型:Solder 主体类型:Straight Bulkhead 电缆类型: