参数资料
型号: 1746A
厂商: B&K Precision
文件页数: 22/58页
文件大小: 0K
描述: POWER SUPPLY 0-16VDC 0-10A
标准包装: 1
系列: 1746
类型: 工作台(AC 至 DC)
电源电压: 120VAC
输出电压: 0 ~ 16VDC
电流 - 输出: 0 ~ 10A
显示器类型: 模拟(2)
输出数: 1
尺寸/尺寸: 15.000" L x 10.500" W x 5.700" H(381.00mm x 266.70mm x 144.78mm)
特点: 恒定电流和恒定电压指示器
精确度 - 伏特表;安培表: 0.025
稳压 - 线路: 0.2% + 2mV
稳压 - 负载: 0.04% + 2mV
稳流 - 线路: 0.4% + 5mA
稳流 - 负载: 0.4% + 5mA
纹波: 1mV rms
重量: 20 磅(9.1kg)
其它名称: BK1746A
APPLICATION
ELECTRONICS DESIGN LAB
The technician or engineer working in an engineering laboratory
requires a dc power supply to power breadboard and prototype
circuits. This power supply is ideal because it monitors output
current, output voltage, limits current to protect the circuit, is
BATTERY CHARGING
The power supply can be used as a battery charger to
restore the charge in rechargeable batteries such as lead-acid,
nickel-cadmium, and some alkaline types. Refer to the
battery manufacturer’s charging specifica tions for proper
adjustable over a wide range, and has excellent regulation and very
voltage and current settings. Charging information
is
low ripple.
Use of the instrument in an engineering laboratory is very
similar to that described for servicing electronics equipment and
modules, except that lower currents may be prevalent when
powering individual circuits. The current limiting feature is very
valuable in this application because it can protect unproven circuits
from damage.
ELECTRONICS EDUCATION
The student in an electronics curriculum may use the power
supply for powering equipment and circuits as previously
described for all other applications. In addition, the power supply
can be used in the classroom laboratory to conduct experiments in
fundamental electronics. In learning Ohm’s law, for example, the
relationships of resistance, current, and voltage are easily
demonstrated by the use of a power supply.
22
sometimes printed on the batteries. Battery charging, at least
initially, requires the constant current mode of operation.
Before connecting the power supply to the battery, preset the
VOLTAGE controls to the fully charged terminal voltage
specified by the battery manufacturer. Turn off the power
supply while connecting the battery. Observe proper polarity
and connect as for constant current operation. Adjust the
CURRENT control for the maximum charging current
specified by the battery manufacturer. (If the maximum
charging current is greater than the power supply’s maximum
load current, set the CURRENT control to maximum). The
CC indicator will light and the battery will charge at the
preset current limit. As the battery approaches full charge, its
terminal voltage will approach that of the power supply
output and the charging current will taper off. The power
supply may automatically switch to CV (constant voltage)
operation. When this occurs, the power supply will continue
to provide a trickle charge.
相关PDF资料
PDF描述
1746B POWER SUPPLY 0-16VDC 0-10A
1756-48 MICROVOLT SPADE LUG SHIELD 48"
1760A POWER SUPPLY TRIPLE OUTPUT
1761 PWR SUPPLY 0-35V 0-3A TRIPLEOUT
1770 PWR SUPPLY PROG ONE 17.5/35V OUT
相关代理商/技术参数
参数描述
1746A2D 制造商:IBM 功能描述:IBM System Storage DS3512 Expr
1746A2E 制造商:IBM 功能描述:IBM SYSTEM STORAGE EXP3512
1746A2S 制造商:IBM 功能描述:IBM System Storage DS3512 Expr
1746A4D 制造商:IBM 功能描述:IBM System Storage DS3524 Expr 制造商:IBM 功能描述:IBM SYSTEM STORAGE DS3524
1746A4E 制造商:IBM 功能描述:IBM SYSTEM STORAGE EXP3524 EXP