- 您现在的位置：买卖IC网 > PDF目录90782 > 176K OP-AMP PDF资料下载
参数资料
| 型号： | 176K |
| 元件分类： | 运算放大器 |
| 英文描述： | OP-AMP |
| 文件页数： | 5/5页 |
| 文件大小： | 238K |
| 代理商： | 176K |
A
5
http://www.calex.com
2401 Stanwell Drive
Concord, CA 94520-4841
(510) 687-4411 Fax (510) 687-3333
CALEX
FaxFACTS:
320
1997
Models 176 & 178 DC Differential Amplifiers
Mounting Kits
Operation with Mounting Kit
When the Model 176 is mounted on a Model MK276 Mounting
Kit, all necessary gain setting and offset adjustments are
provided. A schematic and outline are shown in Figure 10.
Gain can be set in several different ways. For committed gain
applications, a fixed resistor may be soldered to the two
terminals on the PC board. By jumpering pin L to M and pin
S to N, gain may be adjusted from approximately 200 to 1000
with the fine gain adjust trimpot. By jumpering L to M, N to P
and R to S, the gain may be adjusted with the fine and coarse
adjust trimpots with a total gain range of about 30 to 1000. The
low gain range from 10 to 30 is best accommodated by
connecting a fixed resistor (10 kohms to 50 kohms) or
external pot in series with the coarse gain pot.
For convenience during system checkout or troubleshooting,
four testpoints are provided on the PC board which give
access to both terminals and the amplifier output. They are
located at the end of the board so that voltmeter or scope
probes may be inserted even if a number of cards are stacked
in a row.
The MK278 mounting kit has both fine and coarse gain
adjustment pot. The fine gain adjustment pot can be used
alone or for high gains (170 to 1000). Just connect pin L to pin
M and pin N to pin S on the mounting kit. For mid-range gains
(10 to 190), connect both pots in series between pins L and
S. The low gain range is best accommodated by connecting
a fixed resistor or external pot in series with the coarse gain
pot. Also, the mounting kit has terminals on the PC board for
connecting a fixed resistor. If necessary, the gain setting
resistance may be located off the PC board, but this may
degrade frequency response and increase the noise level.
The output offset adjustment has a range of ±7.5 mV.
FIGURE 10. MK276 Electrical Schematic and Mechanical Outline
FIGURE 11. MK278 Electrical Schematic and Mechanical Outline
Model 178/MK278
Model 176/MK276
相关PDF资料 |
PDF描述 |
|---|---|
| 176L | OP-AMP |
| 178 | OP-AMP |
| 1782-97H | 1 ELEMENT, 0.13 uH, PHENOLIC-CORE, GENERAL PURPOSE INDUCTOR |
| 1782-97F | 1 ELEMENT, 0.13 uH, PHENOLIC-CORE, GENERAL PURPOSE INDUCTOR |
| 1782-95F | 1 ELEMENT, 0.11 uH, PHENOLIC-CORE, GENERAL PURPOSE INDUCTOR |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 176K 13 2315 EB | 制造商:Taunuslicht 功能描述:Bulk |
| 176K 13 2315 EG | 制造商:Taunuslicht 功能描述:Bulk |
| 176K 13 2315 ER | 制造商:Taunuslicht 功能描述:Bulk |
| 176K 13 2315 EY | 制造商:Taunuslicht 功能描述:Bulk |
| 176K 13 2315 WS | 制造商:Taunuslicht 功能描述: |
发布紧急采购，3分钟左右您将得到回复。