参数资料
| 型号： | 19276 |
| 厂商： | Desco |
| 文件页数： | 5/6页 |
| 文件大小： | 0K |
| 描述： | TESTER X3 COMBO PROG W/DL PLATE |
| 标准包装： | 1 |
| 类型： | 测试仪，鞋和腕带测试 |
| 使用： | 验证鞋具和腕带接地 |
| 特点： | NIST 可追溯，分别用于鞋具和腕带的测试电路 |
| 电源类型： | AC 适配器 |
| 包括： | AC 适配器，证书，软线 |
DESCO WEST - 3651 Walnut Avenue, Chino, CA 91710 (909) 627-8178
DESCO EAST - One Colgate Way, Canton, MA 02021-1407 (781) 821-8370 Website: Desco.com
TB-3034 Page 5 of 6
2013 DESCO INDUSTRIES, INC.
Employee Owned
If your finger is removed too early, the tester’s LEDs will
blink three times to indicate that the test was not
completed. DO NOT touch any other metal while
performing your test as this will affect your results.
NOTE: Often the initial intermittency will be failure of strain
relief connection to resistor as simulated by ESD S1.1-1998
paragraph 5.7 Bending Life Test.
4. A “PASS” test result is indicated by illumination of
the green LEDs. A “FAIL LOW” test result is indicated
by illumination of the red LEDs. A “FAIL HIGH” test
result is indicated by illumination of the yellow LEDs.
If your ESD test fails, check your wrist strap and
footwear to ensure that they are functioning properly,
being worn correctly and/or need to be replaced.
NOTE: Failures may be caused by dry skin or minimal sweat
layer. For wrist straps, try using an approved dissipative
hand lotion such as Menda Reztore ESD Hand Lotion
to your wrist prior to use. Footwear test results can be
improved by taking a short walk to build a sweat layer for
better conductivity.
The Combo Tester X3 may also be used to test smocks or
garments that feature a grounding mechanism for operators
using a coil cord connection.
Figure 9. Bridging the test switch’s contacts to initiate
the test
Calibration
The Combo Tester X3 is calibrated to standards traceable
to NIST. Frequency of recalibratrion should be based on
the critical nature of those ESD sensitive items handled
and the risk of failure for the ESD protective equipment and
materials. In general, we recommend that calibration be
performed annually.
The accuracy of the Combo Tester X3 is specified as:
±10% for < 1 Megohm range
±10% for 1 Megohm and higher resistance ranges
±20% for 1 Gigohm Range
A periodic check (once every 6 to 12 months) using a
precision resistance box should be performed to verify proper
operation.
The EMIT 50424 Limit Comparator is available for the
convenient period testing of the Combo Tester X3.
The Limit Comparator allows the customer to perform NIST
traceable calibration on the Combo Tester X3. The Limit
Comparator can be used on the floor shop within a few
minutes virtually eliminating downtime, verifiying that the
Combo Tester X3 is operating within tolerances.
See TB-6581 for more information.
Using the 19276
Combo Tester X3
Using the 19277
Combo Tester X3 with Stand
相关PDF资料 |
PDF描述 |
|---|---|
| 19350 | TESTER W/S 2 STATE TOUCH NIST |
| 19430 | STATIC LOCATOR DIGITAL |
| 19447 | KIT COMPLETE FLD MTR/ION TEST |
| 19493 | IONIZATION TEST KIT |
| 19520 | IONIZER BLOWER BENCH 220V NIST |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 19276-0001 | 功能描述:端子 .250X032 FEM FIQD CT INSULK 22-18 QUIXON RoHS:否 制造商:AVX 产品:Junction Box - Wire to Wire 系列:9826 线规:26-18 接线柱/接头大小: 绝缘: 颜色:Red 型式:Female 触点电镀:Tin over Nickel 触点材料:Beryllium Copper, Phosphor Bronze 端接类型:Crimp |
| 19276-0002 | 功能描述:端子 .250X.032 FEM FIQD INSULK 22-18 QUIXON RoHS:否 制造商:AVX 产品:Junction Box - Wire to Wire 系列:9826 线规:26-18 接线柱/接头大小: 绝缘: 颜色:Red 型式:Female 触点电镀:Tin over Nickel 触点材料:Beryllium Copper, Phosphor Bronze 端接类型:Crimp |
| 19276-0003 | 功能描述:端子 .250X032 FEM FIQD TP INSULK 22-18 QUIXON RoHS:否 制造商:AVX 产品:Junction Box - Wire to Wire 系列:9826 线规:26-18 接线柱/接头大小: 绝缘: 颜色:Red 型式:Female 触点电镀:Tin over Nickel 触点材料:Beryllium Copper, Phosphor Bronze 端接类型:Crimp |
| 19276-0004 | 功能描述:端子 .250X032 FEM FIQD CT INSULK 16-14 QUIXON RoHS:否 制造商:AVX 产品:Junction Box - Wire to Wire 系列:9826 线规:26-18 接线柱/接头大小: 绝缘: 颜色:Red 型式:Female 触点电镀:Tin over Nickel 触点材料:Beryllium Copper, Phosphor Bronze 端接类型:Crimp |
| 19276-0005 | 功能描述:端子 .250X.032 FEM FIQD INSULK 16-14 QUIXON RoHS:否 制造商:AVX 产品:Junction Box - Wire to Wire 系列:9826 线规:26-18 接线柱/接头大小: 绝缘: 颜色:Red 型式:Female 触点电镀:Tin over Nickel 触点材料:Beryllium Copper, Phosphor Bronze 端接类型:Crimp |
发布紧急采购，3分钟左右您将得到回复。