参数资料
| 型号： | 19860 |
| 厂商： | Desco |
| 文件页数： | 1/1页 |
| 文件大小： | 0K |
| 描述： | WRISTSTRAP DUAL ASSY WOVEN 7MM |
| 标准包装： | 1 |
| 系列： | Silveron™ |
| 类型： | 腕带，带软线 |
| 线缆类型： | 绕线型 |
| 软线端接： | 3.5mm 直角插头，7mm 钮槽（2） |
| 线缆长度： | 6'（1.83m） |
| 导线数： | 2 |
| 带闭合： | 搭扣 |
| 带材料： | 弹性编织材料 |
| 带终端： | 7mm 钮钉（2） |
| 电阻（欧姆）： | 1M |
| 尺寸： | 统一尺寸 |
| 颜色： | 黑 |
DRAWING
NUMBER
19690
DATE:
March
2009
WRISTBAND, ELASTIC SILVERON
, DUAL WIRE, ADJUSTABLE
2009 DESCO INDUSTRIES INC.
Employee Owned
ITEM
REF. #
DESCRIPTION
19690 SE5000
Adjustable Wristband, 4mm male snaps, with
6' Snap-One Coil Cord, 4mm female snaps, right angle mono plug
19851 SE5100
Adjustable Wristband, 4mm male snaps, with
12' Snap-One Coil Cord, 4mm female snaps, right angle mono plug
19861 SPR1100
Adjustable Wristband, 7mm female snaps (UL Listed)
19860 SPR1006
Adjustable Wristband, 7mm female snaps, with
6
’ Dual-snap Coil Cord, 7mm male snaps, right angle mono plug
DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE: Desco.com
PHONE (909) 627-8178 FAX (909) 627-7449
DESCO EAST: ONE COLGATE WAY, CANTON, MA 02021-1407
PHONE (781) 821-8370
FAX (781) 575-0172
See Drawing 19695 for details on Snap-One Coil Cords
See Drawing 19868 for details on the Dual-snap coil cords
Dual Wire Wrist Strap provides redundancy; even if one dual wire wrist strap
conductor is severed, operator has reliable path-to-ground with other wire.
Used with resistive loop technology continuous monitor, continuously verifies the
proper resistance to ground of the operator
Comfortable adjustable wrist band made of silver suffused monofilament
conductive interior
4mm snaps are machined to precision profile from 300 series stainless steel for
a consistent and reliable connection. 7mm snaps are stamped.
304 stainless steel back plate
Woven Silveron fabric infused with silver monofilament conductive fiber is
comfortable and hypo-allergenic
Patented* dual wire technology
Superior resistor connection strain relief
Superior reliability. Greatly exceeds ESD S1.1 Bending Life Test. Tested at over
200,000 cycles vs. the 16,000 requirement
Superior warranty - See details of 1 year Limited Warranty at
Superior quality product Made in America at our Chino CA facility
Use patented* Dual Wire Wrist Strap with Desco Dual Wire Continuous Monitor
*U.S. Patents 6,052,053 and 6,205,408
"If any part of the loop should open (become disconnected or have out of limit
resistance), the circuit will go into the alarm state" [ref TR20.20], nonetheless,
due to the redundancy inherent in the dual wire wrist strap design, the
operator will continue to be grounded via the second intact wire.
Per ESD Handbook TR20.20 section 5.3.9.2.2 Dual Conductor Resistance
Continuous Monitors, "This type of monitor is used with a two wire (dual
conductor) wrist strap. The wrist strap assembly consists of a two-wire ground
cord and a wristband that has two isolated halves. When a person is wearing
the wrist strap properly, the monitor measures the loop resistance consisting of
one wire of the ground cord, one-half of the wristband, the person's skin, the
second half of the wristband, and a second wire in the ground cord. If any part
of the loop should open (become disconnected or have out of limit resistance),
the circuit will go into the alarm state.
ESD Handbook TR 20.20 paragraph 5.3.2.4.4 Test Frequency "Because wrist
straps have a finite life, it is important to develop a test frequency that will
guarantee integrity of the system. Typical test programs recommend that wrist
straps that are used daily should be tested daily. However, if the products that
are being produced are of such value that knowledge of a continuous, reliable
ground is needed, and then continuous monitoring should be considered or
even required"
Continuous Monitors pay for themselves improving quality, productivity,
eliminating wrist strap daily testing and test result logging. Per ESD-S1.1
paragraph 6.1.3 Frequency of Functional Testing "Daily [Wrist Strap] testing
may be omitted if constant monitoring is used."
Improve wrist strap contact with Reztore
ESD Hand Lotion
Made in America
Adjustable Clasp
相关PDF资料 |
PDF描述 |
|---|---|
| 38770-0118 | CONN BARRIER STRIP 18CIRC .375" |
| G6DS-1A DC5 | RELAY GENERAL PURPOSE SPST 5A 5V |
| 19-141 | CONN BARRIER BLOCK .438" 19 CIRC |
| CB1-WM-12V | RELAY AUTOMOTIVE SPDT 40A 12V |
| CB1F-R-WM-12V | RELAY AUTOMOTIVE SPDT 40A 12V |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 1986000-1 | 功能描述:IC 与器件插座 75A Ultrasonic weld Blue RoHS:否 制造商:Molex 产品:LGA Sockets 节距:1.02 mm 排数: 位置/触点数量:2011 触点电镀:Gold 安装风格:SMD/SMT 端接类型:Solder 插座/封装类型:LGA 2011 工作温度范围:- 40 C to + 100 C |
| 1986000-2 | 功能描述:IC 与器件插座 75A Ultrasonic weld Red RoHS:否 制造商:Molex 产品:LGA Sockets 节距:1.02 mm 排数: 位置/触点数量:2011 触点电镀:Gold 安装风格:SMD/SMT 端接类型:Solder 插座/封装类型:LGA 2011 工作温度范围:- 40 C to + 100 C |
| 1986001-1 | 功能描述:电源到板 120A ULTRASONIC WELD BLUE RoHS:否 制造商:TE Connectivity / AMP 系列:5787444 产品类型:Connectors 触点类型: 电压额定值:50 V 电流额定值: 节距: 位置/触点数量:5 安装风格:Through Hole 端接类型: 触点电镀:Tin |
| 1986001-2 | 制造商:TE Connectivity 功能描述:120A ULTRASONIC WELD, RED - Bulk |
| 1986002-1 | 功能描述:电源到板 180A Ultrasonic weld blue RoHS:否 制造商:TE Connectivity / AMP 系列:5787444 产品类型:Connectors 触点类型: 电压额定值:50 V 电流额定值: 节距: 位置/触点数量:5 安装风格:Through Hole 端接类型: 触点电镀:Tin |
发布紧急采购，3分钟左右您将得到回复。