参数资料
| 型号： | 1996706-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 6/6页 |
| 文件大小： | 0K |
| 描述： | CONN ASSY 8 POS COAX VITA 67 |
| 标准包装： | 10 |
| 系列： | SMPM |
| 连接器用途： | 背板 |
| 连接器类型： | 插头，公引脚 |
| 连接器类型： | VITA 67 |
| 位置数： | 8 |
| 加载位置的数目： | 全部 |
| 间距： | 0.240"（6.10mm） |
| 行数： | 2 |
| 安装类型： | 通孔 |
| 触点布局，典型： | 8 同轴 |
| 特点： | 板导轨 |
| 触点表面涂层： | 金 |
| 包装： | 散装 |
| 工作温度： | -55°C ~ 105°C |
| 额定电压： | 200VAC |
| 其它名称： | A103873 |
108-2443
4.
4.1.
QUALITY ASSURANCE PROVISIONS
Qualification Testing
A.
B.
Specimen Selection
Specimens shall be prepared in accordance with Instruction Sheet 408-10373 and shall be
selected at random, from current production. Test groups 1, 2 and 3 shall consist of 3 specimens
each. Test groups 4 and 8 shall consist of 2 specimens each. Test groups 5 and 7 shall consist of
1 specimen each. Test group 6 shall consist of 6 specimens.
Test Sequence
Qualification inspection shall be verified by testing specimens as specified in Figure 2.
4.2.
4.3.
4.4.
Rev A
Requalification Testing
If changes significantly affecting form, fit or function are made to the product or manufacturing process,
product assurance shall coordinate requalification testing, consisting of all or part of the original testing
sequence as determined by development/product, quality and reliability engineering.
Acceptance
Acceptance is based on verification that the product meets the requirements of Figure 1. Failures
attributed to equipment, test setup or operator deficiencies shall not disqualify the product. If product
failure occurs, corrective action shall be taken and specimens resubmitted for qualification. Testing to
confirm corrective action is required before resubmittal.
Quality Conformance Inspection
The applicable quality inspection plan shall specify the sampling acceptable quality level to be used.
Dimensional and functional requirements shall be in accordance with the applicable product drawing
and this specification.
6 of 6
相关PDF资料 |
PDF描述 |
|---|---|
| 1P01-1110-AS | CONN R/A SCKT & PWR MALE MODULE |
| 1P02-1110-AS | CONN BACKPLANE HDR&PWR FEM MOD |
| 2-1102240-7 | CONN HOOD HB-K SERIES PG16 SZ 3 |
| 2-1102244-2 | HB-K.6.AG-LB |
| 2-1102261-1 | CONN HOOD SIDE SZ4 PG16 HB-K |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 1996715 | 功能描述:可插拔接线端子 MC 1.5/ 5-G-3. 5-THT-R56 RoHS:否 制造商:Phoenix Contact 产品:Plugs 系列:PTS 端接类型:Spring Cage 位置/触点数量:5 线规量程:26-14 节距:5 mm 电流额定值:10 A 电压额定值:250 V 安装风格: 安装角: 触点电镀: |
| 1996728 | 功能描述:可插拔接线端子 MC 1,5/ 8-G-3,5 THT-R56 RoHS:否 制造商:Phoenix Contact 产品:Plugs 系列:PTS 端接类型:Spring Cage 位置/触点数量:5 线规量程:26-14 节距:5 mm 电流额定值:10 A 电压额定值:250 V 安装风格: 安装角: 触点电镀: |
| 1996731 | 制造商:Phoenix Contact 功能描述:HEADER 制造商:Phoenix Contact 功能描述:MC 1 5/ 9-G-3 5 THT-R56 |
| 1996731-1 | 功能描述:机架和面板连接器 MME2P106P106P-00 -204 RoHS:否 制造商:AVX 系列: 产品类型: 位置/触点数量: 安装风格: 端接类型: 外壳材料: 触点材料: 触点电镀: |
| 1996745-1 | 功能描述:SSMA VERTICAL PCB JACK 制造商:te connectivity aerospace, defense and marine 系列:* 零件状态:新产品 标准包装:100 |
发布紧急采购，3分钟左右您将得到回复。