参数资料
| 型号： | 2-1393817-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 2/5页 |
| 文件大小： | 0K |
| 描述： | RELAY GEN PURPOSE DPDT 200MA 48V |
| RoHS指令信息： | 2-1393817-1 Statement of Compliance |
| 标准包装： | 15 |
| 系列： | V23003, AXICOM |
| 继电器类型： | 通用 |
| 线圈类型： | 锁存，双线圈 |
| 线圈电流： | 34.29mA |
| 线圈电压： | 48VDC |
| 触点形式： | DPDT（2 C 型） |
| 触点额定值（电流）： | 200mA |
| 切换电压： | 30VAC，36VDC - 最小值 |
| 关闭电压（最大）： | 33.5 VDC |
| 安装类型： | 可插 |
| 端接类型： | 插入式 |
| 包装： | 散装 |
| 触点材料： | 金（Au） |
| 线圈功率： | 1.65 W |
| 线圈电阻： | 1.4 千欧 |
| 工作温度： | -40°C ~ 70°C |
| 相关产品： | PB1612-ND - RELAY SOCKET PCB SIZE I V23154Z1005-ND - RELAY SOCKET SOLDER SIZE I |
| 其它名称： | V23003A64B604 |
Telecom-, Signal and RF Relays
Cradle Relay P V23003
Coil Data and operating range
108-98012 Rev. C
Nominal voltage
Signal Relays
from 6 Vdc to 60 Vdc
AXICOM
Typical nominal power consumption, at 20 °C 1.5 W
1
Class of the operative range Cradle P Relay V23003 (Continued)
acc to EN 61810-1 / IEC 61810-1 and VDE 0435 Part 201
Operating voltage (according to the coil type)
max. 73% of the nominal voltage
With continuous operation typ. winding at power consumption within specified voltage range at a time!
100°C U depends on the ambient temperature. voltage U I and the maximum voltage U II only depends on the
The minimum voltage U I and the maximum voltage
ambient temperature.
Thermal resistance
50K/W
Coil versions, bistable 2 coils
U I tamb
U I · U20 °C · k I tamb
Coil V23003 I tamb
U II tamb
U Il 20 °C · k II tamb
U = U I 20 °C · k I tamb
dle Relay P
ge 026 6 4.0 4.0 6.7/6.7 24.5/24.5 1.47 U II tamb Maximum voltage at ambient temperature, tamb
k I and k II
U I tamb = Minimum voltage at ambient temperature, t amb
24 II tamb = 16.5
U Maximum voltage at ambient temperature, t amb
500 VAC rms
1000 VAC rms
DE 0435 Part 201
Set - negative potential at start of winding of winding
between contact / fame
500 VAC rms
1000 VAC rms
Initial insulation resistance, at 500 VDC
> 106Ω
Coil Data Coil Data (continued)
Magnetic system polarized, bistable
Coil voltage range 6 to 60 VDC, Note: with continuous operation only one winding to be energized within the
the speci?c voltage range.
Max. coil temperature The minimum
II
COM
m-, Signal and RF Relays 108-98012 Rev. C
Rated Set Reset Limiting Coil Rated coil
U IItamb °C II U Il20 tamb
code voltage = voltage · k voltage Set/Reset resistance power tamb Ambient temperature
VDC VDC t amb
VDC = Ambient temperature VDC ?±15% W (set) U I tamb Minimum voltage at ambient temperature, tamb
025 12 8.0 8.0 13.5/13.5 100/100 1.44 Factors
037 16.5 26.5/25.0 400/340 1.44
k I 44.0 from VdcVdc
044 60 and k II = Factors 6 44.0 to 60 65.0/65.0 2400/2400 1.5 Insulation Data B1xx,B6xx,C1xx,C4xx F1xx
1.5
20 °C 064 48 33.5 33.5 W 49.0/49.0 1400/1400 1.65 Initial dielectric strength
All figures are given for coil without pre-energization, at ambient temperature +23°C. between coil / frame 500 VAC rms 500 VAC rms
1 between contact / contact
Operate - negative potential at start Release - plus potential at start of winding
ype) max. 73% of the nominal voltage
winding at a time may be energized within the speci?c voltage range.
ximum voltage U II depends on the ambient temperature.
ent temperature, t amb
ent temperature, t amb
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
Ambient temperature -40 to + 70°C
Category of environmental protection,
IEC 61810 RT I - dust-protected
Degree of protection, IEC 60529 IP 30
Terminal type hand solder terminals, plug-in
Weight
V23003-A0xxx Size I approx. 25g
V23003-B0xxx Size II approx. 30g
Packaging unit 5 pcs.
Accessories
f winding
Ambient temperature [°C]
Release- at start of atstart
Reset - plus potential plus potential winding of winding
Ambient temperature [°C]
For details see datasheet
Cradle Relay, Accessories and Mounting
All speci?cations subject to change. Consult Tyco Electronics for latest speci?cations.
5 of 14
rature [°C]
Ambient temperature [°C]
Terminals:
coil with 2 windings:
winding I: start 3, end 2
winding
co Electronics for latest speci?cations. II: start 4, end 1
5 of 14
2
04-2011, Rev. 0411
? 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
相关PDF资料 |
PDF描述 |
|---|---|
| CRA06S0835K62FTA | RES ARRAY 5.62K OHM 4 RES 1206 |
| CRA06S0835K49FTA | RES ARRAY 5.49K OHM 4 RES 1206 |
| CRA06S08359R0FTA | RES ARRAY 59 OHM 4 RES 1206 |
| GSP1.8613.1 | GSP1 APPLIANCE INLET 10A 70 |
| CC4850W4URH | RELAY SSR DUAL 50A RNDM PNL MNT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 2-1393817-2 | 功能描述:低信号继电器 - PCB V23003A 64C104 RoHS:否 制造商:NEC 触点形式:2 Form C (DPDT-BM) 触点电流额定值: 线圈电压:5 V 最大开关电流:1 A 线圈电流:1 A 线圈类型:Non-Latching 功耗:140 mW 端接类型:SMT 绝缘: 介入损耗: |
| 2-1393817-3 | 功能描述:低信号继电器 - PCB V23003B 1B110 RoHS:否 制造商:NEC 触点形式:2 Form C (DPDT-BM) 触点电流额定值: 线圈电压:5 V 最大开关电流:1 A 线圈电流:1 A 线圈类型:Non-Latching 功耗:140 mW 端接类型:SMT 绝缘: 介入损耗: |
| 2-1393817-4 | 功能描述:低信号继电器 - PCB V23003B 1C110 RoHS:否 制造商:NEC 触点形式:2 Form C (DPDT-BM) 触点电流额定值: 线圈电压:5 V 最大开关电流:1 A 线圈电流:1 A 线圈类型:Non-Latching 功耗:140 mW 端接类型:SMT 绝缘: 介入损耗: |
| 2-1393817-5 | 功能描述:低信号继电器 - PCB V23003B 1C810 RoHS:否 制造商:NEC 触点形式:2 Form C (DPDT-BM) 触点电流额定值: 线圈电压:5 V 最大开关电流:1 A 线圈电流:1 A 线圈类型:Non-Latching 功耗:140 mW 端接类型:SMT 绝缘: 介入损耗: |
| 2-1393817-6 | 功能描述:低信号继电器 - PCB V23003B 1F104 RoHS:否 制造商:NEC 触点形式:2 Form C (DPDT-BM) 触点电流额定值: 线圈电压:5 V 最大开关电流:1 A 线圈电流:1 A 线圈类型:Non-Latching 功耗:140 mW 端接类型:SMT 绝缘: 介入损耗: |
发布紧急采购，3分钟左右您将得到回复。