收藏本站
参数资料
型号： 20-101-1138
厂商： Rabbit Semiconductor
文件页数： 74/124页
文件大小： 0K
描述： RCM4300 RABBITCORE
产品培训模块： WiFi Authentication
标准包装： 1
系列： RabbitCore®
模块/板类型： MPU 核心模块
适用于相关产品： RCM4300
其它名称： 316-1141
RabbitCore RCM4300 User’s Manual
53
5.2.6 RCM4300 Cloning
The RCM4300 does not have a pull-up resistor on the PB1 (CLKA) line of the program-
ming port. Because of this, the procedure to generate clones from the RCM4300 differs
from that used for other RabbitCore modules and single-boards computers. You must set
the CL_FORCE_MASTER_MODE macro to 1 in the Dynamic C LIB\Rabbit4000\
BIOSLIB\CLONECONFIG.LIB
library to use the RCM4300 as a master for cloning. An
RCM4300 master will not run the application, and further debugging is not possible as
long as the CL_FORCE_MASTER_MODE macro is set to 1. Any cloned RCM4300 modules
will be “sterile,” meaning that they cannot be used as a master for cloning. To develop and
debug an application on an RCM4300, comment out the CL_FORCE_MASTER_MODE
macro or set it to 0.
NOTE: Instead of defining this macro is your application, you may simply add the line
CL_FORCE_MASTER_MODE=1
under the Dynamic C Options > Project
Options “Defines” tab, then click OK. When you recompile your program, this will
have the same effect as setting the macro to 1 within the CLONECONFIG.LIB library.
See Rabbit Semiconductor’s Technical Note TN207, Rabbit Cloning Board, for addi-
tional information on Rabbit Semiconductor’s cloning board and how cloning is done.
5.2.7 microSD Card Drivers
The Dynamic C LIB\Rabbit4000\SDflash\SDFLASH.LIB library is used to interface
to microSD Card memory devices on an SPI bus. More information on these function
calls is available in the Dynamic C Function Reference Manual.
The microSD Card is ideally suited to store files with a directory structure. The Dynamic
C FAT file system module provides support for a file system and for formatting the
microSD Card for use in a Rabbit-based system. This allows files to be read and written
in a PC-compatible manner. Visit our Web site at www.rabbit.com or contact your Rabbit
Semiconductor sales representative or authorized distributor for further information on the
Dynamic C FAT File System and other Dynamic C modules. The supporting documenta-
tion for the Dynamic C FAT File System and the sample programs in the SAMPLES\
FileSystem\FAT
folder illustrate the use of the Dynamic C FAT file system.
相关PDF资料
PDF描述
305-030-521-201 CONN CARDEDGE 30POS .156 GREEN
20-101-1051 MODULE RABBITCORE RCM3365
305-030-520-204 CONN CARDEDGE 30POS .156 GREEN
20-101-1196 MODULE RABBITCORE RCM3900
20-101-1105 MODULE RCM4100 RABBITCORE
相关代理商/技术参数
参数描述
20-101-1139 功能描述:模块化系统 - SOM RCM4310 RABBITCORE RoHS:否 制造商:Digi International 外观尺寸:ConnectCore 9P 处理器类型:ARM926EJ-S 频率:150 MHz 存储容量:8 MB, 16 MB 存储类型:NOR Flash, SDRAM 接口类型:I2C, SPI, UART 工作电源电压:3.3 V 最大工作温度:+ 85 C 尺寸:1.97 in x 1.97 in x 6.1 in
20-101-1140 功能描述:WiFi/802.11模块 RCM4400W CORE MODULE Wi-Fi/802.11 RoHS:否 制造商:Taiyo Yuden 支持协议:802.11 b/g/n 频带: 数据速率:150 Mbps 接口类型:SDIO 传输功率（最大）: 天线连接器类型: 工作电源电压:3.4 V to 5.5 V 传输供电电流: 接收供电电流: 最大工作温度:+ 80 C 尺寸:35 mm x 15 mm x 2.9 mm
20-101-1153 功能描述:子卡和OEM板 RCM4300 Proto board RoHS:否 制造商:BeagleBoard by CircuitCo 产品:BeagleBone LCD4 Boards 用于:BeagleBone - BB-Bone - Open Source Development Kit
20-101-1154 功能描述:模块化系统 - SOM RCM4120 RabbitCore- Module RoHS:否 制造商:Digi International 外观尺寸:ConnectCore 9P 处理器类型:ARM926EJ-S 频率:150 MHz 存储容量:8 MB, 16 MB 存储类型:NOR Flash, SDRAM 接口类型:I2C, SPI, UART 工作电源电压:3.3 V 最大工作温度:+ 85 C 尺寸:1.97 in x 1.97 in x 6.1 in
20-101-1170 功能描述:Zigbee/802.15.4模块 RCM4510W CORE MODULE RoHS:否 制造商:Digi International 频带:902 MHz to 928 MHz 视线范围: 数据速率: 灵敏度: 工作电源电压:2.4 V to 3.6 V 传输供电电流:215 mA 接收供电电流:26 mA 输出功率:250 mW 天线连接器类型:Wire 最大工作温度:+ 85 C 尺寸:32.94 mm x 22 mm x 2.03 mm
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*