参数资料
型号: 20-101-1154
厂商: Rabbit Semiconductor
文件页数: 32/112页
文件大小: 0K
描述: MODULE RCM4120 RABBITCORE
标准包装: 1
系列: RabbitCore®
模块/板类型: MPU 核心模块
适用于相关产品: RCM4120
其它名称: 316-1122
22
RabbitCore RCM4100
THERMISTOR.C
—Demonstrates how to use analog input LN7 to calculate temperature
for display to the Dynamic C STDIO window. This sample program assumes that the
thermistor is the one included in the Development Kit whose values for beta, series
resistance, and resistance at standard temperature are given in the part specification.
Install the thermistor at location JP25 on the Prototyping Board before running this
sample program. Observe the temperature changes shown in the Dynamic C STDIO
window as you apply heat or cold air to the thermistor.
3.2.2.1 Downloading and Uploading Calibration Constants
The Tera Term utility called for in these sample programs can be downloaded from
These sample programs must be compiled to flash memory. To do so, select Options >
Project Options
in Dynamic C, then select the “Compiler” tab, and select “Code and
BIOS in Flash” for the BIOS Memory Setting.
Before you compile and run these sample programs, you
will also need to connect the RS-232 header at J4 to your
PC as shown in the diagram using the serial to DB9 cable
supplied in the Development Kit.
DNLOADCALIB.C
—Demonstrates how to retrieve
analog calibration data to rewrite it back to the user
block using a terminal emulation utility such as Tera
Term.
Start Tera Term or another terminal emulation program
on your PC, and configure the serial parameters as
follows.
Now compile and run this sample program. Verify that the message “Waiting, Please
Send Data file” message is being display in the Tera Term display window before
proceeding.
Within Tera Term, select File-->Send File-->Path and filename, then select the
OPEN
option within the dialog box. Once the data file has been downloaded, Tera
Term will indicate whether the calibration data were written successfully.
UPLOADCALIB.C
—Demonstrates how to read the analog calibration constants from
the user block using a terminal emulation utility such as Tera Term.
Start Tera Term or another terminal emulation program on your PC, and configure the
serial parameters as follows.
Baud rate 19,200 bps, 8 bits, no parity, 1 stop bit
Enable Local Echo option
Feed options — Receive = CR, Transmit = CR + LF
J4
RxC TxC
GND
TxD RxD
Colored
edge
相关PDF资料
PDF描述
20-101-1197 MODULE RABBITCORE RCM3910 ROHS
20-101-1215 MCU RCM4050 RABBITCORE
20-101-1246 CORE MODULE RCM5400W
20-101-1260 BL5S220 SBC (RCM5400-BASED)
20-101-1319 MINCORE MODULE RCM6710
相关代理商/技术参数
参数描述
20-101-1170 功能描述:Zigbee/802.15.4模块 RCM4510W CORE MODULE RoHS:否 制造商:Digi International 频带:902 MHz to 928 MHz 视线范围: 数据速率: 灵敏度: 工作电源电压:2.4 V to 3.6 V 传输供电电流:215 mA 接收供电电流:26 mA 输出功率:250 mW 天线连接器类型:Wire 最大工作温度:+ 85 C 尺寸:32.94 mm x 22 mm x 2.03 mm
20-101-1179 功能描述:模块化系统 - SOM RCM3209 RABBITCORE RoHS:否 制造商:Digi International 外观尺寸:ConnectCore 9P 处理器类型:ARM926EJ-S 频率:150 MHz 存储容量:8 MB, 16 MB 存储类型:NOR Flash, SDRAM 接口类型:I2C, SPI, UART 工作电源电压:3.3 V 最大工作温度:+ 85 C 尺寸:1.97 in x 1.97 in x 6.1 in
20-101-1183 功能描述:程序设计器配件 USB PROGRAM CABLE RoHS:否 制造商:Lattice 产品:ispDOWNLOAD Cables 用于:In-system Programming
20-101-1184 功能描述:模块化系统 - SOM IC CPU RABBIT 2000 (2 pack) RoHS:否 制造商:Digi International 外观尺寸:ConnectCore 9P 处理器类型:ARM926EJ-S 频率:150 MHz 存储容量:8 MB, 16 MB 存储类型:NOR Flash, SDRAM 接口类型:I2C, SPI, UART 工作电源电压:3.3 V 最大工作温度:+ 85 C 尺寸:1.97 in x 1.97 in x 6.1 in
20-101-1185 功能描述:微处理器 - MPU IC CPU RABBIT 3000A (2 pack) RoHS:否 制造商:Atmel 处理器系列:SAMA5D31 核心:ARM Cortex A5 数据总线宽度:32 bit 最大时钟频率:536 MHz 程序存储器大小:32 KB 数据 RAM 大小:128 KB 接口类型:CAN, Ethernet, LIN, SPI,TWI, UART, USB 工作电源电压:1.8 V to 3.3 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:FBGA-324