收藏本站
参数资料
型号： 20-101-1196
厂商： Rabbit Semiconductor
文件页数： 78/168页
文件大小： 0K
描述： MODULE RABBITCORE RCM3900
标准包装： 1
系列： RabbitCore®
模块/板类型： MPU 核心模块
适用于相关产品： RCM3900
其它名称： 20-101-1196-ND
316-1155
RabbitCore RCM3900 User’s Manual
17
2.3 Starting Dynamic C
Once the RCM3900 is connected as described in the preceding pages, start Dynamic C by
double-clicking on the Dynamic C icon on your desktop or in your Start menu. Dynamic C
uses the serial port specified during installation. Select Code and BIOS in Flash, Run in
RAM
on the “Compiler” tab in the Dynamic C Options > Project Options menu. Then
click on the “Communications” tab and verify that Use USB to Serial Converter is
selected to support the USB programming cable. Click OK.
This program shows that the CPU is working. The sample program described in
Section 6.5, “Run the PINGME.C Sample Program,” tests the TCP/IP portion of the board.
2.4 Run a Sample Program
Use the File menu to open the sample program PONG.C, which is in the Dynamic C
SAMPLES
folder. Press function key F9 to compile and run the program. The STDIO
window will open on your PC and will display a small square bouncing around in a box.
2.4.1 Troubleshooting
If Dynamic C cannot find the target system (error message "No Rabbit Processor
Detected."
):
Check that the RCM3900 is powered correctly — the red CORE LED on the Prototyp-
ing Board should be lit when the RCM3900 is mounted on the Prototyping Board and
the AC adapter is plugged in.
Check both ends of the programming cable to ensure that they are firmly plugged into
the PC and the PROG connector, not the DIAG connector, is plugged in to the program-
ming port on the RCM3900 with the marked (colored) edge of the programming cable
towards pin 1 of the programming header.
Ensure that the RCM3900 module is firmly and correctly installed in its connectors on
the Prototyping Board.
Select a different COM port within Dynamic C. From the Options menu, select Proj-
ect Options
, then select another COM port from the list on the Communications tab,
then click OK. Press <Ctrl-Y> to force Dynamic C to recompile the BIOS.
If you get an error message when you plugged the programming cable into a USB port,
you will have to install USB drivers. Drivers for Windows XP are available in the
Dynamic C Drivers\Rabbit USB Programming Cable\WinXP_2K folder —
double-click DPInst.exe to install the USB drivers. Drivers for other operating
systems are available online at www.ftdichip.com/Drivers/VCP.htm.
相关PDF资料
PDF描述
20-101-1105 MODULE RCM4100 RABBITCORE
20-101-1028 MODULE RABBITCORE RCM3750
046232104015800+ CONN FFC/FPC 4POS 1MM VERT SMD
20-101-0454 MODULE RABBITCORE RCM2200
20-101-0405 MODULE RABBITCORE RCM2010
相关代理商/技术参数
参数描述
20-101-1197 功能描述:模块化系统 - SOM RCM3910 RABBITCORE RoHS:否 制造商:Digi International 外观尺寸:ConnectCore 9P 处理器类型:ARM926EJ-S 频率:150 MHz 存储容量:8 MB, 16 MB 存储类型:NOR Flash, SDRAM 接口类型:I2C, SPI, UART 工作电源电压:3.3 V 最大工作温度:+ 85 C 尺寸:1.97 in x 1.97 in x 6.1 in
20-101-1198 功能描述:程序设计器配件 Programmers, Development Systems Accessories - CARD EXPANSION RN1400 ROHS RoHS:否 制造商:Lattice 产品:ispDOWNLOAD Cables 用于:In-system Programming
20-101-1200 功能描述:子卡和OEM板 UNIVERSAL RELAY EXP BOARD RoHS:否 制造商:BeagleBoard by CircuitCo 产品:BeagleBone LCD4 Boards 用于:BeagleBone - BB-Bone - Open Source Development Kit
20-101-1201 功能描述:程序设计器配件 USB PROG CBL WITH 2MM CONN RoHS:否 制造商:Lattice 产品:ispDOWNLOAD Cables 用于:In-system Programming
20-101-1202 功能描述:WiFi/802.11模块 RCM4400W CORE MODULE Wi-Fi/802.11 RoHS:否 制造商:Taiyo Yuden 支持协议:802.11 b/g/n 频带: 数据速率:150 Mbps 接口类型:SDIO 传输功率（最大）: 天线连接器类型: 工作电源电压:3.4 V to 5.5 V 传输供电电流: 接收供电电流: 最大工作温度:+ 80 C 尺寸:35 mm x 15 mm x 2.9 mm
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*