参数资料
型号: 20-101-1217
厂商: Rabbit Semiconductor
文件页数: 96/138页
文件大小: 0K
描述: MODULE RABBITCORE RCM3229
标准包装: 50
系列: RabbitCore®
模块/板类型: MPU 核心模块
适用于相关产品: RCM3229
产品目录页面: 620 (CN2011-ZH PDF)
其它名称: 316-1146
54
RabbitCore RCM3200
6.5 Run the PINGME.C Sample Program
Connect the crossover cable from your computer’s Ethernet port to the RCM3200 board’s
RJ-45 Ethernet connector. Open this sample program from the SAMPLES\TCPIP\ICMP
folder, compile the program, and start it running under Dynamic C. When the program
starts running, the green LNK light on the RCM3200 board should be on to indicate an
Ethernet connection is made. (Note: If the LNK light does not light, you may not have a
crossover cable, or if you are using a hub perhaps the power is off on the hub.)
The next step is to ping the board from your PC. This can be done by bringing up the MS-
DOS window and running the pingme program:
ping 10.10.6.100
or by Start > Run
and typing the entry
ping 10.10.6.100
Notice that the red ACT light flashes on the RCM3200 board while the ping is taking
place, and indicates the transfer of data. The ping routine will ping the board four times
and write a summary message on the screen describing the operation.
6.6 Running More Sample Programs With Direct Connect
The sample programs discussed here are in the Dynamic C SAMPLES\RCM3200\TCPIP\
folder.
BROWSELED.C
—This program demonstrates a basic controller running a Web page.
Two “LEDs” are created on the Web page, and two buttons on the Prototyping Board
then toggle them. Users can change the status of the lights from the Web browser. The
LEDs on the Prototyping Board match the ones on the Web page. As long as you have
not modified the TCPCONFIG 1 macro in the sample program, enter the following server
address in your Web browser to bring up the Web page served by the sample program.
http://10.10.6.100.
Otherwise use the TCP/IP settings you entered in the TCP_CONFIG.LIB library.
ECHOCLIENT.C
—This program demonstrates a basic client that will send a packet and
wait for the connected server to echo it back. After every number of sends and receives,
transfer times are shown in the STDIO window.
Use ECHO_SERVER.C to program a server controller.
ECHOSERVER.C
—This program demonstrates a basic server that will echo back any
data sent from a connected client.
Use ECHO_CLIENT.C to program a client controller.
ENET_AD.C
—This program demonstrates Ethernet communication between two
single-board computers. The program sends an A/D voltage value to the second single-
board computer via Ethernet for display.
Use ENET_MENU.C to program the other single-board computer.
相关PDF资料
PDF描述
20-101-0494 MODULE RABBITCORE RCM2250
AT25020N-10SI-2.7 IC EEPROM 2KBIT 2.1MHZ 8SOIC
345-030-521-801 CARDEDGE 30POS DUAL .100 GREEN
12FMN-BMTTN-A-TF CONN FMN HSNG 12POS STAG NOR SMD
AT25020-10PI-2.7 IC EEPROM 2KBIT 2.1MHZ 8DIP
相关代理商/技术参数
参数描述
20-101-1220 功能描述:单板计算机 BL4S200 (RCM4310-based) RoHS:否 制造商:Ampro By ADLINK 外观尺寸:EPIC 处理器类型:Intel Atom D510 频率:1.66 GHz 存储容量:2 GB (max) 存储类型:DDR2, L2 Cache 接口类型:Ethernet, PS/2, SATA, Serial, USB 工作电源电压:5 V, 12 V 功耗:13 W 最大工作温度:+ 70 C 尺寸:165.1 mm x 114.3 mm
20-101-1221 功能描述:射频模块 RCM4400W Japan Telec Certfied RoHS:否 制造商:Linx Technologies 产品:Transceiver Modules 频带:902 MHz to 928 MHz 输出功率:- 15.5 dBm to + 12.5 dBm 接口类型:UART 工作电源电压:- 0.3 VDC to + 5.5 VDC 传输供电电流:38.1 mA 接收供电电流:22.7 mA 天线连接器类型:U.FL 最大工作温度:+ 85 C 尺寸:1.15 mm x 0.63 mm x 0.131 mm
20-101-1235 功能描述:模块化系统 - SOM RCM5700 Minicore RoHS:否 制造商:Digi International 外观尺寸:ConnectCore 9P 处理器类型:ARM926EJ-S 频率:150 MHz 存储容量:8 MB, 16 MB 存储类型:NOR Flash, SDRAM 接口类型:I2C, SPI, UART 工作电源电压:3.3 V 最大工作温度:+ 85 C 尺寸:1.97 in x 1.97 in x 6.1 in
20-101-1236 功能描述:界面开发工具 INTERFACE BOARD RCM56/57XX RoHS:否 制造商:Bourns 产品:Evaluation Boards 类型:RS-485 工具用于评估:ADM3485E 接口类型:RS-485 工作电源电压:3.3 V
20-101-1246 功能描述:模块化系统 - SOM RCM5400W RABBITCORE MODULE RoHS:否 制造商:Digi International 外观尺寸:ConnectCore 9P 处理器类型:ARM926EJ-S 频率:150 MHz 存储容量:8 MB, 16 MB 存储类型:NOR Flash, SDRAM 接口类型:I2C, SPI, UART 工作电源电压:3.3 V 最大工作温度:+ 85 C 尺寸:1.97 in x 1.97 in x 6.1 in