- 您现在的位置：买卖IC网 > PDF目录156594 > 20IMX35-12-12-8I 2-OUTPUT 35 W DC-DC REG PWR SUPPLY MODULE PDF资料下载
参数资料
| 型号： | 20IMX35-12-12-8I |
| 元件分类： | 电源模块 |
| 英文描述： | 2-OUTPUT 35 W DC-DC REG PWR SUPPLY MODULE |
| 文件页数： | 4/18页 |
| 文件大小： | 320K |
| 代理商： | 20IMX35-12-12-8I |
Board Mountable
DC-DC Converters
IMX 35 Series
Edition 1/01.2001
12/18
Synchronisation (W)
This logic input can be used to synchronise the oscillator to
an external frequency source. The input is edge triggered
with TTL thresholds, and requires a source frequency of
490...540 kHz (duty cycle 10...90%). The external source
frequency is internally divided by 2 to define the switching
frequency of the converter. If unused, this pin can be con-
nected to V1– (pin 2) or left open-circuit.
Reference (Ref)
The signal output provides a stable 5 V (
±0.1 V) reference
signal on pin Ref. It is protected by a 1 k
resistor. This sig-
nal may be used also in conjunction with the Trim input pin
5 (primary side) as a limited external voltage reference.
Then we recommend to connect a filter capacitor (0.1
F)
between Ref and Vi–.
Shut Down Function
The outputs of the converters may be enabled or disabled
by means of a logic signal (TTL, CMOS, etc.) applied to the
shut down pin. If the shut down function is not required then
it should be left open-circuit.
Converter operating:
2.0...20 V
Converter shut down:
–10...0.7 V
Programmable Input Undervoltage Lockout PUL
A special feature of these units is the accurate undervoltage
lockout function which protects the units (and the system)
from large currents caused by operation at low voltages.
This ensures easier start-up in distributed power systems.
Table 7: Turn on and turn off voltage
Type
Trigger level
Hysteresis
Units
20 IMX 35
7...8
≤0.5
V
40 IMX 35
14...15.5
≤1
See:
Electrical input data for a description of the turn on
turn off voltage levels of the various types.
The under voltage lockout levels may be programmed by
use of an external resistor to pull up the preset level as indi-
cated in table 8. (see:
Fig. 15).
Table 8: Typical values for Rext and the respective lockout
voltage for input voltage.
20 IMX 35
40 IMX 35
RPUL [k]
Ui min [V]
RPUL [k]
Ui min [V]
∞≤8
∞≤15.5
39
10
43
22
19
12
16
26
13
14
10
28
9.1
16
0
32
相关PDF资料 |
PDF描述 |
|---|---|
| 40PC500G1A | GAGE, PEIZORESISTIVE PRESSURE SENSOR, 0-500Psi, 0.2%, 4.5V, RECTANGULAR, SURFACE MOUNT |
| 40T-1 | POWER TRANSFORMER, 40 VA |
| 410-13-246-41-001 | IC SOCKET |
| 411-13-264-41-001 | SIP64, IC SOCKET |
| 411-13-204-41-001 | SIP4, IC SOCKET |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 20IMX35-12-12-9 | 制造商:POWER-ONE 制造商全称:Power-One 功能描述:35 Watt DC-DC Converters |
| 20IMX35-15-15-9 | 制造商:POWER-ONE 制造商全称:Power-One 功能描述:35 Watt DC-DC Converters |
| 20IMX35D05D05-8 | 功能描述:DC/DC转换器 35W (4x 5V) DC Input (8.4-36V) RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸: |
| 20IMX35D05D05-8G | 功能描述:DC/DC转换器 RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸: |
| 20IMX35D05D05-8I | 功能描述:DC/DC CONVERTER QUAD 5V 1.35A 35 制造商:bel power solutions 系列:Melcher IMX35 包装:散装 零件状态:有效 类型:隔离模块 输出数:4 电压 - 输入（最小值）:9V 电压 - 输入（最大值）:36V 电压 - 输出 1:5V 电压 - 输出 2:5V 电压 - 输出 3:5V 电流 - 输出（最大值）:1.35A，1.35A，1.35A 功率（W） - 制造系列:35W 电压 - 隔离:1.5kV（1500V） 应用:ITE（商业） 特性:远程开/关，OCP，OTP，OVP，SCP，UVLO 安装类型:通孔 封装/外壳:19-DIP 模块（17 7 引线） 大小/尺寸:3.00" 长 x 2.50" 宽 x 0.41" 高（76.2mm x 63.5mm x 10.5mm） 工作温度:-40°C ~ 85°C 效率:86% 功率（W） - 最大值:27W 标准包装:4 |
发布紧急采购，3分钟左右您将得到回复。