- 您现在的位置：买卖IC网 > PDF目录140867 > 20IMX7-03-8 (POWER-ONE INC) 1-OUTPUT 5 W DC-DC REG PWR SUPPLY MODULE PDF资料下载
参数资料
| 型号： | 20IMX7-03-8 |
| 厂商： | POWER-ONE INC |
| 元件分类： | 电源模块 |
| 英文描述： | 1-OUTPUT 5 W DC-DC REG PWR SUPPLY MODULE |
| 封装： | ROHS COMPLIANT PACKAGE-9 |
| 文件页数： | 14/14页 |
| 文件大小： | 321K |
| 代理商： | 20IMX7-03-8 |
BCD20007 Rev AA
Page 9 of 14
www.power-one.com
IMX7 DC-DC Series Data Sheet
7-Watt DC-DC Converters
Fig. 14
Output voltage adjust for single-output models
Either: Rext1 between the R pin and Vo– to achieve an
output voltage adjustment range of Vo = 75 to 100% Vo nom
(85 to 100% for 3.3 V outputs):
Vo
Rext1
≈ 4 k –––––––––
Vo nom – Vo
or: Rext2 between the R pin and Vo+ to achieve an output
voltage range of approximately Vo = 100 to 105 % Vo nom:
(Vo – 2.5 V)
Rext2
≈ 4 k ––––––––––––––––––
2.5 V (Vo/Vo nom – 1)
b) Adjustment by means of an external voltage Vext between
Vo– and R pin.
The control voltage is 1.96 to 2.62 V and allows for
adjustment in the range of 75 to 105% Vo nom.
Vo 2.5 V
Vext
≈ ––––––––
Vo nom
Caution: Applying an external voltage >2.75 V may damage the
converter.
Note: Attempting to adjust the output below this range will cause
the converter to shut down (hiccup mode).
R
Vo+
Vo–
+
V
ext
4 k
Vref = 2.5 V
control
circuit
Vi+
Vi–
R
ext1
R
ext 2
06029a
–
+
–
Double-output models with Trim input:
The Trim input (pin 4) of double-output models is referenced to
the primary side. The figure below shows the circuit topology.
Adjustment of the output voltage is possible in the range of 100
to 105% Vo nom using an external resistor, or in the range of 75 to
105% Vo nom using an external voltage source.
Trim
Vo1+
Vo2–
+
V
ext
–
Vi+
Vi–
R
ext
Vo1–
Vo2+
06089a
Control
circuit
Vref =2.5 V
a) Adjustment by means of an external resistor Rext.
Programming of the output voltage by means of an external
resistor Rext1 is possible within a limited range of 100 to
105% Vo nom. Rext should be connected between pin 4 and
Vi –. The following table indicates suitable resistor values
for typical output voltages under nominal conditions (Vi nom,
Io = 0.5 Io nom), with paralleled outputs or equal load
conditions on each output.
Caution: Connection of Rext to Vi+ may damage the converter.
b) Adjustment by means of an external voltage source Vext.
For external output voltages in the range of 75 to 105%
Vo nom a voltage source Vext (0 to 20 V) is required,
connected to the Trim-input (pin 4) and Vi–. The table
below indicates typical Vo versus Vext values under
nominal conditions (Vi nom, Io = 0.5 Io nom), with paralleled
outputs or equal load conditions on each output. Direct
paralleling of the Trim-inputs of converters connected in
parallel is feasible.
Note: Applying a control voltage greater than 20 V will set the
converter into a hiccup mode.
Fig. 15
Output voltage adjust for double-output models
Table 6: Rext for Vo > Vo nom
approximate values (Vi nom, Io1, 2 = 0.5 Io1/2 nom)
Vo [% Vo nom]
Rext [ kW]
105 to 108 (107 typically)
0
105
1.5
104
5.6
103
12
102
27
101
68
100
∞
Table 7: Vext for Vo = 75 to 105% Vo nom;
typical values (Vi nom, Io1, 2 = 0.5 Io1/2 nom)
Vo [% Vo nom]
Vext [V]
≥105
0
102
1.6
95
4.5
85
9
75
13
相关PDF资料 |
PDF描述 |
|---|---|
| 24IML10-12-12-3Z | 2-OUTPUT 10 W DC-DC REG PWR SUPPLY MODULE |
| 24IML10-15-15-3C | 2-OUTPUT 10 W DC-DC REG PWR SUPPLY MODULE |
| 24IWR1-05-12-S | 2-OUTPUT 1 W DC-DC REG PWR SUPPLY MODULE |
| 24IXR1-1212-T | 2-OUTPUT 1 W DC-DC REG PWR SUPPLY MODULE |
| 20IMX15-15-15-9L | 2-OUTPUT DC-DC REG PWR SUPPLY MODULE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 20IMX7-03-8G | 功能描述:DC/DC转换器 RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸: |
| 20IMX7-03-9 | 制造商:POWER-ONE 制造商全称:Power-One 功能描述:7 Watt DC-DC Converters |
| 20IMX7-05-05-8 | 功能描述:DC/DC转换器 7W (2x 5V) DC Input (8.4-36V) RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸: |
| 20IMX7-05-05-8G | 功能描述:DC/DC转换器 RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸: |
| 20IMX7-05-05-9 | 制造商:POWER-ONE 制造商全称:Power-One 功能描述:7 Watt DC-DC Converters |
发布紧急采购，3分钟左右您将得到回复。