- 您现在的位置：买卖IC网 > PDF目录18591 > 2101595-1 (TE Connectivity)TOOL INSERTION SMPM CONTACT PDF资料下载
参数资料
| 型号： | 2101595-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 2/2页 |
| 文件大小： | 0K |
| 描述： | TOOL INSERTION SMPM CONTACT |
| 标准包装： | 1 |
| 工具类型： | 插入工具 |
| 适用于相关产品： | 背板 - 机架和面板触点 |
| 其它名称： | A105513 |
SMPM Floating Panel Mount, Cable Jacks (Direct Solder Attachment) 1996390- 1, 1996771- 1
408- 10373
!
2. Insert compression spring in module mounting
hole and over connector body from the module
mating face.
3. Place retaining washer into insertion tool
2101595--1 aligning the flats on the tool with the
external flats on the washer.
4. Align the internal retaining washer flats with the
external flats on the connector body using the
alignment slots on the connector flange and on the
insertion tool. See Figure 5.
5. Insert the retaining washer into the module, over
the connector body compressing the spring until
the insertion tool bottoms on the module mating
face.
6. Lock the retaining washer into position by
rotating the insertion tool 90 ? while applying light
pressure on the tool. (The tool will spring back
about 0.51 mm [.020 in.] from the module face
when washer is in proper position. A correct
installation of the retaining washer will result in a
dimension of 3.22 mm [.127 in.] from front of
module. See Figure 6.
CAUTION Safety glasses should be worn when installing
the retaining washer since they are spring--loaded
and could potentially fly out of the module. This
action could inflict eye injury to personnel if the
retaining washer is not properly seated during
installation.
5. REPLACEMENT AND REPAIR
The cable plug is not repairable. DO NOT use any
defective or damaged cable plugs.
6. REVISION SUMMARY
S Updated document to corporate requirements
S Changed “Retaining Ring” to Retaining
Washer” in all instances
S Added text to Paragraphs 4.1, 4.2, and 4.5
S Added new Figure 6
Alignment Slot
Compression Spring
Alignment Slot
Cable
Connector
Flange
Retaining Washer
Insertion Tool
Module Mating Face
Figure 5
3.86 [.152] Wrong
Washer Installation
0.64 [.025] Height Delta
Figure 6
3.23 [.127] Correct
Washer Installation
2 of 2
Tyco Electronics Corporation
Rev B
相关PDF资料 |
PDF描述 |
|---|---|
| B32529C152J189 | FILM CAP 0.0015UF 5% 63V |
| B32529C1473K189 | FILM CAP 0.0470UF 10% 100V |
| ABLSG-28.63636MHZ-D-2-Y-F-T | CRYSTAL 28.63636 MHZ 18PF SMD |
| IPR3FAD6L0G | SWITCH PUSH SPST-NO 0.5A 48V |
| IPR3FAD2L0Y | SWITCH PUSH SPST-NO 0.5A 48V |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 2101598-1 | 功能描述:机架和面板连接器 A600P Sz3 Q11x4/blnk/85 RoHS:否 制造商:AVX 系列: 产品类型: 位置/触点数量: 安装风格: 端接类型: 外壳材料: 触点材料: 触点电镀: |
| 210-160 | 制造商:Digilent Inc 功能描述:PMOD BT - BLUETOOTH INTERFACE - Bulk |
| 210160 | 制造商:Thomas & Betts 功能描述:CRIMP TERM FEMALE 6.35X0.8MM 100PK |
| 210-161 | 制造商:Digilent Inc 功能描述:FX2 MIB - Bulk 制造商:DIGILENT, INC. 功能描述:FX2MIB MODULE INTERFACE BOARD |
| 2101619-2 | 功能描述:D-Sub标准连接器 AMPLIMITE PLUG,RA 109 REVERSE BEND RoHS:否 制造商:Omron Electronics 位置/触点数量:9 排数:2 型式:Female 安装风格:Through Hole 安装角:Right 端接类型:Solder 过滤: |
发布紧急采购，3分钟左右您将得到回复。