- 您现在的位置：买卖IC网 > PDF目录4545 > 24AA1025T-I/SN (Microchip Technology)EEPROM 1024K I2C 400KHZ 8SOIC PDF资料下载
参数资料
| 型号： | 24AA1025T-I/SN |
| 厂商： | Microchip Technology |
| 文件页数： | 12/28页 |
| 文件大小： | 0K |
| 描述： | EEPROM 1024K I2C 400KHZ 8SOIC |
| 标准包装： | 1 |
| 格式 - 存储器： | EEPROMs - 串行 |
| 存储器类型： | EEPROM |
| 存储容量： | 1M (128K x 8) |
| 速度： | 100kHz，400kHz |
| 接口： | I²C，2 线串口 |
| 电源电压： | 1.7 V ~ 5.5 V |
| 工作温度： | -40°C ~ 85°C |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm 宽） |
| 供应商设备封装： | 8-SOICN |
| 包装： | 标准包装 |
| 其它名称： | 24AA1025T-I/SNDKR |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页当前第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页
24AA1025/24LC1025/24FC1025
8.0
READ OPERATION
8.2
Random Read
Read operations are initiated in the same way as write
operations with the exception that the R/W bit of the
control byte is set to one. There are three basic types
of read operations: current address read, random read
and sequential read.
Random read operations allow the master to access
any memory location in a random manner. To perform
this type of read operation, first the word address must
be set. This is done by sending the word address to the
24XX1025 as part of a write operation (R/W bit set to
0 ). After the word address is sent, the master
8.1
Current Address Read
generates a Start condition following the acknowledge.
This terminates the write operation, but not before the
The 24XX1025 contains an address counter that
maintains the address of the last word accessed,
internally incremented by one. Therefore, if the
previous read access was to address n (n is any legal
address), the next current address read operation
would access data from address n + 1.
Upon receipt of the control byte with R/W bit set to one,
the 24XX1025 issues an acknowledge and transmits
the 8-bit data word. The master will not acknowledge
the transfer, but does generate a Stop condition and the
internal Address Pointer is set. Then, the master issues
the control byte again, but with the R/W bit set to a one.
The 24XX1025 will then issue an acknowledge and
transmit the 8-bit data word. The master will not
acknowledge the transfer, but does generate a Stop
condition which causes the 24XX1025 to discontinue
transmission ( Figure 8-2 ). After a random Read
command, the internal address counter will point to the
address location following the one that was just read.
24XX1025 discontinues transmission ( Figure 8-1 ).
8.3
Sequential Read
FIGURE 8-1:
S
CURRENT ADDRESS
READ
Sequential reads are initiated in the same way as a
random read except that after the 24XX1025 transmits
the first data byte, the master issues an acknowledge
as opposed to the Stop condition used in a random
BUS ACTIVITY
MASTER
T
A
R
Control
Byte
Data
Byte
S
T
O
read. This acknowledge directs the 24XX1025 to
transmit the next sequentially addressed 8-bit word
T
P
( Figure 8-3 ). Following the final byte transmitted to the
S 1 0 1 0 B AA 1
SDA LINE
BUS ACTIVITY
0 1 0
A
C
N
O
P
master, the master will NOT generate an acknowledge,
but will generate a Stop condition. To provide
sequential reads, the 24XX1025 contains an internal
DS21941K-page 12
K
A
C
K
Address Pointer which is incremented by one at the
completion of each operation. This Address Pointer
allows half the memory contents to be serially read
during one operation. Sequential read address
boundaries are 00000h to 0FFFFh and 10000h to
1FFFFh. The internal Address Pointer will
automatically roll over from address 0FFFFh to
address 00000h if the master acknowledges the byte
received from the array address, 0FFFFh. The internal
address counter will automatically roll over from
address 1FFFFh to address 10000h if the master
acknowledges the byte received from the array
address, 1FFFFh.
? 2005-2012 Microchip Technology Inc.
相关PDF资料 |
PDF描述 |
|---|---|
| 24LC515-I/SM | IC EEPROM 512KBIT 400KHZ 8SOIC |
| SST39VF1682-70-4I-B3KE | IC FLASH MPF 16MBIT 70NS 48TFBGA |
| SST39VF1681-70-4I-B3KE | IC FLASH MPF 16MBIT 70NS 48TFBGA |
| SST39VF1602-70-4I-B3KE | IC FLASH MPF 16MBIT 70NS 48TFBGA |
| SST39VF1681-70-4I-EKE | IC FLASH MPF 16MBIT 70NS 48TSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 24AA1026 | 制造商:MICROCHIP 制造商全称:Microchip Technology 功能描述:1024K I2C? CMOS Serial EEPROM 100 kHz and 400 kHz Clock Compatibility |
| 24AA1026_12 | 制造商:MICROCHIP 制造商全称:Microchip Technology 功能描述:1024K I2Ca?￠ Serial EEPROM |
| 24AA1026-I/P | 功能描述:电可擦除可编程只读存储器 1024K 128K X 8 1.8V SER EE 128 BYTE PAGE RoHS:否 制造商:Atmel 存储容量:2 Kbit 组织:256 B x 8 数据保留:100 yr 最大时钟频率:1000 KHz 最大工作电流:6 uA 工作电源电压:1.7 V to 5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 |
| 24AA1026-I/SM | 功能描述:电可擦除可编程只读存储器 1024K 128K X 8 1.8V SER EE 128 BYTE PAGE RoHS:否 制造商:Atmel 存储容量:2 Kbit 组织:256 B x 8 数据保留:100 yr 最大时钟频率:1000 KHz 最大工作电流:6 uA 工作电源电压:1.7 V to 5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 |
| 24AA1026-I/SN | 功能描述:电可擦除可编程只读存储器 1024K 128K X 8 1.8V SER EE 128 BYTE PAGE RoHS:否 制造商:Atmel 存储容量:2 Kbit 组织:256 B x 8 数据保留:100 yr 最大时钟频率:1000 KHz 最大工作电流:6 uA 工作电源电压:1.7 V to 5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 |
发布紧急采购，3分钟左右您将得到回复。