参数资料
| 型号： | 24C00-E/SN |
| 厂商： | Microchip Technology |
| 文件页数： | 5/24页 |
| 文件大小： | 0K |
| 描述： | IC EEPROM 128BIT 100KHZ 8SOIC |
| 产品培训模块： | I2C Serial EEPROM |
| 标准包装： | 100 |
| 格式 - 存储器： | EEPROMs - 串行 |
| 存储器类型： | EEPROM |
| 存储容量： | 128（16 x 8） |
| 速度： | 100kHz |
| 接口： | I²C，2 线串口 |
| 电源电压： | 4.5 V ~ 5.5 V |
| 工作温度： | -40°C ~ 125°C |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm 宽） |
| 供应商设备封装： | 8-SOICN |
| 包装： | 管件 |
| 其它名称： | 24C00E/SN |
24AA00/24LC00/24C00
4.5
Acknowledge
The device that acknowledges has to pull down the
Each receiving device, when addressed, is obliged to
generate an acknowledge after the reception of each
byte. The master device must generate an extra clock
pulse which is associated with this Acknowledge bit.
SDA line during the Acknowledge clock pulse in such a
way that the SDA line is stable low during the high
period of the acknowledge related clock pulse. Of
course, setup and hold times must be taken into
account. A master must signal an end of data to the
Note:
The 24XX00 does not generate any
Acknowledge bits if an internal program-
ming cycle is in progress.
slave by not generating an Acknowledge bit on the last
byte that has been clocked out of the slave. In this
case, the slave must leave the data line high to enable
the master to generate the Stop condition (Figure 4-2).
FIGURE 4-1:
DATA TRANSFER SEQUENCE ON THE SERIAL BUS
SCL
(A)
(B)
(C)
(D)
(C)
(A)
SDA
Start
Condition
FIGURE 4-2:
Address or
Acknowledge
Valid
ACKNOWLEDGE TIMING
Data
Allowed
to Change
Stop
Condition
Acknowledge
Bit
SCL
1
2
3
4
5
6
7
8
9
1
2
3
SDA
Data from transmitter
Transmitter must release the SDA line at this point
allowing the Receiver to pull the SDA line low to
acknowledge the previous eight bits of data.
Data from transmitter
Receiver must release the SDA line at this point
so the Transmitter can continue sending data.
? 2007 Microchip Technology Inc.
DS21178G-page 5
相关PDF资料 |
PDF描述 |
|---|---|
| 24LC025-I/SN | IC EEPROM 2KBIT 400KHZ 8SOIC |
| 24C00T-E/SN | IC EEPROM 128BIT 100KHZ 8SOIC |
| 180-026-173L030 | CONN DB26 MALE HD CRIMP NICKEL |
| EP2S60F1020C3 | IC STRATIX II FPGA 60K 1020-FBGA |
| APA1000-FGG896A | IC FPGA PROASIC+ 1M 896-FBGA |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 24C00-EST | 制造商:MICROCHIP 制造商全称:Microchip Technology 功能描述:128 Bit I 2 C? Bus Serial EEPROM |
| 24C00-I/MC | 制造商:MICROCHIP 制造商全称:Microchip Technology 功能描述:128 Bit I2C Bus Serial EEPROM |
| 24C00-I/OT | 制造商:MICROCHIP 制造商全称:Microchip Technology 功能描述:1K/2K Software Addressable I2C⑩ Serial EEPROM |
| 24C00-I/P | 功能描述:电可擦除可编程只读存储器 16byte 128kb 5V RoHS:否 制造商:Atmel 存储容量:2 Kbit 组织:256 B x 8 数据保留:100 yr 最大时钟频率:1000 KHz 最大工作电流:6 uA 工作电源电压:1.7 V to 5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 |
| 24C00-I/PG | 功能描述:电可擦除可编程只读存储器 16byte 128kb 5V Lead Free Package RoHS:否 制造商:Atmel 存储容量:2 Kbit 组织:256 B x 8 数据保留:100 yr 最大时钟频率:1000 KHz 最大工作电流:6 uA 工作电源电压:1.7 V to 5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 |
发布紧急采购，3分钟左右您将得到回复。