参数资料
| 型号： | 24LC04B-I/MS |
| 厂商： | Microchip Technology |
| 文件页数： | 11/34页 |
| 文件大小： | 0K |
| 描述： | IC EEPROM 4KBIT 400KHZ 8MSOP |
| 产品培训模块： | I2C Serial EEPROM |
| 标准包装： | 100 |
| 格式 - 存储器： | EEPROMs - 串行 |
| 存储器类型： | EEPROM |
| 存储容量： | 4K (2 x 256 x 8) |
| 速度： | 400kHz |
| 接口： | I²C，2 线串口 |
| 电源电压： | 2.5 V ~ 5.5 V |
| 工作温度： | -40°C ~ 85°C |
| 封装/外壳： | 8-TSSOP，8-MSOP（0.118"，3.00mm 宽） |
| 供应商设备封装： | 8-MSOP |
| 包装： | 管件 |
| 产品目录页面： | 1445 (CN2011-ZH PDF) |
| 其它名称： | 24LC04BI/MS |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页当前第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页
24AA04/24LC04B
8.0
READ OPERATION
8.3
Sequential Read
Read operations are initiated in the same way as write
operations, with the exception that the R/W bit of the
slave address is set to ‘ 1 ’. There are three basic types
of read operations: current address read, random read
and sequential read.
Sequential reads are initiated in the same way as a
random read, except that once the 24XX04 transmits
the first data byte, the master issues an acknowledge
as opposed to a Stop condition in a random read. This
directs the 24XX04 to transmit the next sequentially-
addressed 8-bit word (Figure 8-3).
8.1
Current Address Read
To provide sequential reads, the 24XX04 contains an
The 24XX04 contains an address counter that main-
tains the address of the last word accessed, internally
incremented by ‘ 1 ’. Therefore, if the previous access
(either a read or write operation) was to address n , the
internal Address Pointer that is incremented by one
upon completion of each operation. This Address
Pointer allows the entire memory contents to be serially
read during one operation.
next current address read operation would access data
from address n + 1 . Upon receipt of the slave address
8.4
Noise Protection
with R/W bit set to ‘ 1 ’, the 24XX04 issues an acknowl-
edge and transmits the 8-bit data word. The master will
not acknowledge the transfer, but does generate a Stop
condition and the 24XX04 discontinues transmission
(Figure 8-1).
The 24XX04 employs a V CC threshold detector circuit
which disables the internal erase/write logic if the V CC
is below 1.5V at nominal conditions.
The SCL and SDA inputs have Schmitt Trigger and
filter circuits which suppress noise spikes to assure
8.2
Random Read
proper device operation, even on a noisy bus.
Random read operations allow the master to access
any memory location in a random manner. To perform
this type of read operation, the word address must first
be set. This is accomplished by sending the word
address to the 24XX04 as part of a write operation.
Once the word address is sent, the master generates a
Start condition following the acknowledge. This termi-
nates the write operation, but not before the internal
Address Pointer is set. The master then issues the
control byte again, but with the R/W bit set to a ‘ 1 ’. The
24XX04 will then issue an acknowledge and transmit
the 8-bit data word. The master will not acknowledge
the transfer, but does generate a Stop condition and the
24XX04, will discontinue transmission (Figure 8-2).
FIGURE 8-1:
CURRENT ADDRESS READ
S
Bus Activity
Master
T
A
R
Control
Byte
Data (n)
S
T
O
T
P
SDA Line
S 1
0
1
0
x x B0 1
P
Bus Activity
x = “don’t care”
? 2009 Microchip Technology Inc.
Block
Select
Bits
A
C
K
N
o
A
C
K
DS21708K-page 11
相关PDF资料 |
PDF描述 |
|---|---|
| ASM30DTMD-S189 | CONN EDGECARD 60POS R/A .156 SLD |
| AGLN060V2-CSG81I | IC FPGA NANO 1KB 60K 81-CSP |
| AGM30DTMD-S189 | CONN EDGECARD 60POS R/A .156 SLD |
| AGLN125V5-ZVQG100 | IC FPGA NANO 1KB 125K 100VQFP |
| AYM30DTMD-S189 | CONN EDGECARD 60POS R/A .156 SLD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 24LC04BIP | 制造商:Panasonic Industrial Company 功能描述:SUB ONLY IC/P-C3EAEC000016 SUBBING WITH P-C3EAEC000016 |
| 24LC04BISN | 制造商:Microchip Technology Inc 功能描述: |
| 24LC04BT | 制造商:MICROCHIP 制造商全称:Microchip Technology 功能描述:4K I2C? Serial EEPROM |
| 24LC04BT-/SL | 制造商:未知厂家 制造商全称:未知厂家 功能描述:I2C Serial EEPROM |
| 24LC04BT-/SM | 制造商:未知厂家 制造商全称:未知厂家 功能描述:I2C Serial EEPROM |
发布紧急采购，3分钟左右您将得到回复。