- 您现在的位置：买卖IC网 > PDF目录4246 > 24LC256T-E/MS (Microchip Technology)IC EEPROM 256KBIT 400KHZ 8MSOP PDF资料下载
参数资料
| 型号： | 24LC256T-E/MS |
| 厂商： | Microchip Technology |
| 文件页数： | 8/38页 |
| 文件大小： | 0K |
| 描述： | IC EEPROM 256KBIT 400KHZ 8MSOP |
| 产品培训模块： | I2C Serial EEPROM |
| 标准包装： | 2,500 |
| 格式 - 存储器： | EEPROMs - 串行 |
| 存储器类型： | EEPROM |
| 存储容量： | 256K (32K x 8) |
| 速度： | 400kHz |
| 接口： | I²C，2 线串口 |
| 电源电压： | 2.5 V ~ 5.5 V |
| 工作温度： | -40°C ~ 125°C |
| 封装/外壳： | 8-TSSOP，8-MSOP（0.118"，3.00mm 宽） |
| 供应商设备封装： | 8-MSOP |
| 包装： | 带卷 (TR) |
第1页第2页第3页第4页第5页第6页第7页当前第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页
24AA256/24LC256/24FC256
5.0
DEVICE ADDRESSING
FIGURE 5-1:
CONTROL BYTE
A control byte is the first byte received following the
Start condition from the master device (Figure 5-1).
The control byte consists of a 4-bit control code. For the
24XX256, this is set as ‘ 1010’ binary for read and
FORMAT
Read/Write Bit
Chip Select
write operations. The next three bits of the control byte
are the Chip Select bits (A2, A1, A0). The Chip Select
Control Code
Bits
bits allow the use of up to eight 24XX256 devices on
the same bus and are used to select which device is
S
1
0
1
0
A2
A1
A0 R/W ACK
accessed. The Chip Select bits in the control byte must
correspond to the logic levels on the corresponding A2,
Slave Address
A1 and A0 pins for the device to respond. These bits
are, in effect, the three Most Significant bits of the word
address.
For the MSOP package, the A0 and A1 pins are not
Start Bit
5.1
Acknowledge Bit
Contiguous Addressing Across
connected. During device addressing, the A0 and A1
Chip Select bits (Figures 5-1 and 5-2) should be set to
‘ 0 ’. Only two 24XX256 MSOP packages can be
connected to the same bus.
The last bit of the control byte defines the operation to
be performed. When set to a one, a read operation is
selected. When set to a zero, a write operation is
selected. The next two bytes received define the
address of the first data byte (Figure 5-2). Because
only A14…A0 are used, the upper address bits are a
“don’t care.” The upper address bits are transferred
first, followed by the Less Significant bits.
Following the Start condition, the 24XX256 monitors
the SDA bus checking the device type identifier being
transmitted. Upon receiving a ‘ 1010’ code and
appropriate device select bits, the slave device outputs
an Acknowledge signal on the SDA line. Depending on
the state of the R/W bit, the 24XX256 will select a read
or write operation.
Multiple Devices
The Chip Select bits A2, A1 and A0 can be used to
expand the contiguous address space for up to 2 Mbit
by adding up to eight 24XX256 devices on the same
bus. In this case, software can use A0 of the control
byte as address bit A15; A1 as address bit A16; and A2
as address bit A17. It is not possible to sequentially
read across device boundaries.
For the MSOP package, up to two 24XX256 devices
can be added for up to 512 Kbit of address space. In
this case, software can use A2 of the control byte as
address bit A17. Bits A0 (A15) and A1 (A16) of the
control byte must always be set to a logic ‘ 0 ’ for the
MSOP.
FIGURE 5-2:
ADDRESS SEQUENCE BIT ASSIGNMENTS
Control Byte
Address High Byte
Address Low Byte
0 R/W
1
0
1
0
A
2
A
1
A
x
A A A A A
14 13 12 11 10
A
9
A
8
A
7
?
?
?
?
?
?
A
0
Control
Code
DS21203R-page 8
Chip
Select
Bits
x = “don’t care” bit
? 1998-2011 Microchip Technology Inc.
相关PDF资料 |
PDF描述 |
|---|---|
| XC2V500-4FGG456C | IC VIRTEX-II FPGA 500K 456-FBGA |
| 93C76-E/P | IC EEPROM 8KBIT 2MHZ 8DIP |
| 745539-5 | CONN CASSETTE 33POS PLUG KIT 4PC |
| 745641-2 | CONN CASSETTE PLUG 33POS SLD CUP |
| 5-745539-1 | CASSETTE HOLDER KIT (BULK |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 24LC256T-I/MF | 功能描述:电可擦除可编程只读存储器 256K 32K X 8 2.5V SER EE IND RoHS:否 制造商:Atmel 存储容量:2 Kbit 组织:256 B x 8 数据保留:100 yr 最大时钟频率:1000 KHz 最大工作电流:6 uA 工作电源电压:1.7 V to 5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 |
| 24LC256T-I/MNY | 功能描述:电可擦除可编程只读存储器 256K, 32Kx8, 2.5V SER EE, IND RoHS:否 制造商:Atmel 存储容量:2 Kbit 组织:256 B x 8 数据保留:100 yr 最大时钟频率:1000 KHz 最大工作电流:6 uA 工作电源电压:1.7 V to 5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 |
| 24LC256T-I/MS | 功能描述:电可擦除可编程只读存储器 32kx8 - 2.5V RoHS:否 制造商:Atmel 存储容量:2 Kbit 组织:256 B x 8 数据保留:100 yr 最大时钟频率:1000 KHz 最大工作电流:6 uA 工作电源电压:1.7 V to 5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 |
| 24LC256T-I/MSG | 功能描述:电可擦除可编程只读存储器 32kx8 - 2.5V Lead Free Package RoHS:否 制造商:Atmel 存储容量:2 Kbit 组织:256 B x 8 数据保留:100 yr 最大时钟频率:1000 KHz 最大工作电流:6 uA 工作电源电压:1.7 V to 5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 |
| 24LC256T-I/SM | 功能描述:电可擦除可编程只读存储器 32kx8 - 2.5V RoHS:否 制造商:Atmel 存储容量:2 Kbit 组织:256 B x 8 数据保留:100 yr 最大时钟频率:1000 KHz 最大工作电流:6 uA 工作电源电压:1.7 V to 5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 |
发布紧急采购，3分钟左右您将得到回复。