参数资料
| 型号： | 25.4MM-5M-5515-20 |
| 厂商： | 3M (TC) |
| 文件页数： | 3/4页 |
| 文件大小： | 0K |
| 描述： | THERMAL INTERFACE PAD 25.4MM |
| 标准包装： | 1 |
| 系列： | 5515-20 |
| 使用： | 卷，可裁 |
| 形状： | 矩形 |
| 外形： | 5m x 25.40mm |
| 厚度： | 0.008"（0.203mm） |
| 材质： | 硅质 |
| 胶合剂： | 胶粘 - 两侧 |
| 背衬，载体： | 聚对苯二甲二乙酯（PET） |
| 导热性： | 3.0 W/m-K |
| 其它名称： | 3M10330 |
3M
Thermally Conductive Silicone Interface Pad 5515-20 and 5515-25
(3)
Application Technique
Adhesion strength of the 3M Thermally Conductive Silicone Interface Pad 5515 is dependent upon the total amount of
surface contact developed. Firm application pressure helps develop better contact and improves adhesion strength as the
product is slightly tacky only.
Contact surfaces should be clean, dry and well unified to allow for improved adhesion and thermal performance. Typical
surface cleaning solvents are an isopropyl alcohol and water blend: Note: Follow manufacturer’s safety precautions and
directions for use when using solvents.
Useful application temperature range is from 20°C to 40°C. Initial application to surfaces at temperatures below 20°C is
not suggested because the pad will be firmer and wet-out could be reduced. However, once properly applied, low
temperature holding is generally satisfactory.
相关PDF资料 |
PDF描述 |
|---|---|
| 558709-000 | CABLE 16AWG SHIELDED |
| 200MM-1M-5515-20 | THERMAL INTERFACE PAD 200MM |
| 19.05MM-5M-5515-20 | THERMAL INTERFACE PAD 19.05MM |
| 316050-000 | CABLE 20AWG SHIELDED |
| 12.7MM-5M-5515-20 | THERMAL INTERFACE PAD 12.7MM |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 254MSAR1-01/50 | 制造商:Lumberg Connect GmbH 功能描述:HEADER 50 WAY |
| 254N028A | 制造商:LG Corporation 功能描述:PLATE BATTERY CONT B UM-3 |
| 254N029A | 制造商:LG Corporation 功能描述:PLATE BATTERY CONTACT A UM-1 |
| 254P | 制造商:Wakefield Thermal Solutions 功能描述: |
| 254-PB102-ROX | 功能描述:音频指示器及警报器 10 x 3.2mm 3.2KHz RoHS:否 制造商:PUI Audio 产品:Indicators 声压级:85 dB 音调:Continuous 频率:2300 Hz +/- 300 Hz 电压额定值:5 VDC 电流额定值:30 mA 端接类型: 直径:12 mm 安装:Through Hole |
发布紧急采购，3分钟左右您将得到回复。