- 您现在的位置：买卖IC网 > PDF目录41410 > 2DE19P (ITT CANNON) 19 CONTACT(S), MALE, D SUBMINIATURE CONNECTOR, CRIMP PDF资料下载
参数资料
| 型号： | 2DE19P |
| 厂商： | ITT CANNON |
| 元件分类： | D-微型连接器 |
| 英文描述： | 19 CONTACT(S), MALE, D SUBMINIATURE CONNECTOR, CRIMP |
| 封装： | ROHS COMPLIANT |
| 文件页数： | 2/10页 |
| 文件大小： | 607K |
| 代理商： | 2DE19P |
69
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
The Centi Line - .075" Contact Spacing
2D/CTA
CTA Assembly Instructions
.275 (6.98)
MAX.
.475 (12.06)
MAX.
INSERTION
Guide Posts
Polarizing Posts
1. Place the connector into the slot in the assembly block
with the arrows on the insulator pointing downward. The
connector will bottom against the internal shoulder in the
groove in the assembly block. Start contact insertion by
placing the crimped contact in the cavity by hard.
3. With firm steady pressure, push the contact into the
cavity until the resilient internal shoulder snaps into the
locking groove in the contact. To prevent over insertion,
the tool tip bottoms against the rear of the insulator.
4. The guide post and polarizing posts are inserted in teh
same manner as the contacts. The guide posts are inserted
into the socket insulator, and the polarizing posts are
inserted into the pin insulartor. The corresponding contact
in the mating insulator must be removed for each.
2. Position the insertion tool tip on the rear of contact as
shown. The insulation must be pulled back from the crimp
pot approximately 1/32" to allow the tool tip to butt
against the contact crimp pot.
EXTRACTION
1. To extract the contacts, place the conector face up in
the assembly block so that the contact to be extracted is
in the end of the block that has a fully slotted opening.
2. The pin extraction tool tip is tubular, slides over the pin
bundle and butts against the front shoulder of the pin. The
socket extraction tool is a solid rod that fits into the socket
contact, the external shoulder butts against the contact
socket shoulder.
3. Insert the extraction tool into the cavity and apply firm
pressure until the contact is pushed thru the rear of the
connector.
4. Lift the insulator from the groove and pull the contact
out. Repeat for balance of contacts to be removed.
相关PDF资料 |
PDF描述 |
|---|---|
| 2DE19SBRP | 19 CONTACT(S), MALE, D SUBMINIATURE CONNECTOR, SOLDER |
| 2DE19S | 19 CONTACT(S), FEMALE, D SUBMINIATURE CONNECTOR, CRIMP |
| 2MBI300UD-120 | 400 A, 1200 V, N-CHANNEL IGBT |
| 2MBI400U4H-170 | 600 A, 1700 V, N-CHANNEL IGBT |
| 2MBI450U4E-120 | 675 A, 1200 V, N-CHANNEL IGBT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 2DE-19P | 功能描述:19 位 D-Sub，双密度 插头，公引脚 连接器, 自由悬挂 压接 制造商:itt cannon, llc 系列:微型，2D 包装:散装 零件状态:有效 连接器样式:D-Sub，双密度 连接器类型:插头，公引脚 针脚数:19 排数:3 外壳尺寸，连接器布局:1（DE，E）双密度 触头类型:信号 安装类型:自由悬挂 法兰特性:体座/外壳（无螺纹） 端接:压接 特性:- 外壳材料，镀层:钢，黄色镀铬镉 触头镀层:金 触头镀层厚度:- 侵入防护:- 工作温度:-55°C ~ 85°C 额定电压:- 额定电流:5A 外壳材料:聚酰胺（PA），尼龙，玻璃纤维增强型 颜色:黑 标准包装:1 |
| 2DE19P-33 | 制造商:ITT Interconnect Solutions 功能描述:2DE19P-33 - Bulk |
| 2DE19P-35 | 制造商:ITT Interconnect Solutions 功能描述:2DE19P-35 - Bulk |
| 2DE19P-A106 | 制造商:ITT Interconnect Solutions 功能描述:2DE19P-A106 - Bulk |
| 2DE19P-A139 | 制造商:ITT Interconnect Solutions 功能描述:2DE19P-A139 - Bulk |
发布紧急采购，3分钟左右您将得到回复。