- 您现在的位置：买卖IC网 > PDF目录30601 > 2SJ600 25000 mA, 60 V, P-CHANNEL, Si, SMALL SIGNAL, MOSFET, TO-251 PDF资料下载
参数资料
| 型号： | 2SJ600 |
| 元件分类： | 小信号晶体管 |
| 英文描述： | 25000 mA, 60 V, P-CHANNEL, Si, SMALL SIGNAL, MOSFET, TO-251 |
| 封装： | TO-251, MP-3, 3 PIN |
| 文件页数： | 8/10页 |
| 文件大小： | 240K |
| 代理商： | 2SJ600 |
LA75695VA
No.7637-7/13
V6. AGC range [GR]
(1) Apply the VCC voltage to the external AGC, IF AGC (pin 17).
(2) In the same manner as for the V5 (input sensitivity), measure the VIF input level at which the detection output
level becomes Vo -3dB. Vil
(3) GR = Vil–Vi
V7. Maximum allowable input [Vi max]
(1) Internal AGC
(2) fp = 45.75MHz 15kHz 78% AM (VIF input)
(3) VIF input level at which the detection output level at test point A is video output (VO) ±1dB.
V8. No-signal video output voltage [V6]
(1) Apply the VCC voltage to the external AGC, IF AGC (pin 17).
(2) Measure the DC voltage of VIDEO output (A).
V9. Sync. signal tip voltage [V6tip]
(1) Internal AGC
(2) Input a 45.75MHz 10mVrms continuous wave to the VIF input pin.
(3) Measure the DC voltage of VIDEO output (A).
V10. Video output level [VO]
(1) Internal AGC
(2) fp = 45.75MHz 15kHz 78% AM Vi = 10mVrms (VIF input)
(3) Measure the peak value of the detection output level at test point A. (Vp-p)
V11.V12. Black noise threshold level and clamp voltage [VBTH, VBCL]
(1) Apply DC voltage to the external AGC, IF AGC (pin 17) and adjust the voltage.
(2) fp = 45.75MHz 400Hz 40% AM 10mVrms (VIF input)
(3) Adjust the IF AGC (pin 17) voltage to operate the noise canceller.
Measure the VBTH, VBCL at test point A.
V13. Video S/N [S/N]
(1) Internal AGC
(2) fp = 45.75MHz CW = 10mVrms (VIF input)
(3) Measure the noise voltage at test point A in RMS volts through a 10kHz to 4MHz band-pass filter.
Noise voltage (N)
(4) S/N = 20log
= 20log
(dB)
Video portion (Vp-p)
Noise voltage (Vrms)
1.12Vp-p
Noise voltage (Vrms)
相关PDF资料 |
PDF描述 |
|---|---|
| 2SJ600-Z | 25000 mA, 60 V, P-CHANNEL, Si, SMALL SIGNAL, MOSFET, TO-252AB |
| 2SJ600 | 25000 mA, 60 V, P-CHANNEL, Si, SMALL SIGNAL, MOSFET, TO-251 |
| 2SJ600-Z | 25000 mA, 60 V, P-CHANNEL, Si, SMALL SIGNAL, MOSFET, TO-252AB |
| 2SJ601-AZ | 36000 mA, 60 V, P-CHANNEL, Si, SMALL SIGNAL, MOSFET, TO-251 |
| 2SJ601-Z-AZ | 36000 mA, 60 V, P-CHANNEL, Si, SMALL SIGNAL, MOSFET, TO-252AB |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 2SJ600-AZ | 制造商:Renesas Electronics 功能描述:Cut Tape 制造商:Renesas Electronics Corporation 功能描述:Pch MOSFET,60V,25A,41m ohm,TO-251 制造商:Renesas 功能描述:Trans MOSFET P-CH 60V 25A 3-Pin(3+Tab) TO-251 |
| 2SJ600-Z | 制造商:NEC 制造商全称:NEC 功能描述:SWITCHING P-CHANNEL POWER MOS FET INDUSTRIAL USE |
| 2SJ600-Z-AZ | 制造商:Renesas Electronics 功能描述:Pch -60V -25A 50m@10V TO252 Bulk |
| 2SJ600-Z-E1-AZ | 制造商:Renesas Electronics Corporation 功能描述: |
| 2SJ601 | 制造商:Renesas Electronics Corporation 功能描述: |
发布紧急采购，3分钟左右您将得到回复。