AMP M Series
Pin and Socket Connectors
94
Catalog 82003
Dimensions are in millimeters
Dimensions are shown for USA: 1-800-522-6752
South America: 55-11-3611-1514
Revised 06-08
and inches unless otherwise
reference purposes only.
Canada: 1-905-470-4425
Hong Kong: 852-2735-1628
specified. Values in brackets are
Specifications subject
Mexico: 01-800-733-8926
Japan: 81-44-844-8013
www.tycoelectronics.com
equivalent U.S. Customary Units.
to change.
C. America: 52-55-5-729-0425 UK: 44-141-810-8967
NOTE: All part numbers
are RoHS Compliant
Application Tooling (Continued)
Interchangeable applicators
for crimping products in
AMP-O-MATIC Stripper-
Crimper Machines. Consist
of separate ram and
lower tooling assemblies.
Similar dial-in settings for
different wire sizes and
insulation diameters as HDM
applicators. Available with
sensors for use with the
Crimp Quality Monitor.
For more information, request
Catalog
65004 (AMP-O-MATIC
Stripper-Crimper Machines),
Catalog
82275 [Crimp Quality
Monitor (CQM)].
Stripper-Crimper
Applicators (coded SCA)
89827
Semiautomatic bench
crimping machines that
also strip the wire, and
are therefore used for
terminating jacketed cable.
Feature manual precision
adjustment of crimp height,
keyed strip blades for faster,
more accurate setups, and
an efficient scrap removal
system. All adjustments can
be made from the front of
the machines without special
tools. Available with crimp
quality monitoring.
For more information, request
Catalog
65004, Video 198075,
Catalog
82275 [Crimp Quality
Monitor (CQM)], Video 198094.
AMP-O-MATIC Stripper-
Crimper Machines, Part
Nos. 1320895-1, -2
STRIPPER-CRIMPER MACHINES
The combination of the
Stripping Module with the
AMP 3K/40 and AMP 5K/40
Terminating Machines or
the AMP-O-LECTRIC Model
“G” Terminator provides an
economic and proficient
method of stripping the
wire and crimping terminals
on the same machine. The
module accepts End- and
Side-Feed HDM Applicators
(32-14 AWG) and operates
in three modes: crimp only,
strip only, or strip and crimp.
It can be installed on existing
machines in the field or
purchased as one unit from
the factory.
For more information, request
Catalog
1309085.
Stripping Module (for the
AMP 3K/40 and AMP
5K/40 Terminating
Machines and AMP-O-
LECTRIC Model “G”
Terminator on page 77)
12075-2
The Cosmic 30M is a high
precision, high speed
electrical wire stripper that
is very easy to operate. It’s
equipped with a four blade
system and an optional
gripper for more difficult
wires. There is a digital
display for the wire diameter
that can be set at 0.01 mm
increments.
For more information, request
Catalog
1773385-2.
Cosmic 30M Wire Strip-
ping Machine, 5-528367-0
The compact, lightweight,
benchtop Cosmic 927R was
designed and developed
to reliably strip various
insulation materials and
micro-cable. From conductor
diameter 36 to 10 AWG, the
stripping diameter display
can be set to within 0.1 mm
increments.
For more information, request
Catalog
1773385-4.
Cosmic 927R Micro-Cable
Stripper
Applica
tion
T
ooling