参数资料
| 型号： | 3/4-5-3435 |
| 厂商： | 3M (TC) |
| 文件页数： | 1/5页 |
| 文件大小： | 0K |
| 描述： | SHEETING REFLECTIVE 3/4" X 5YD |
| MSDS 材料安全数据表： | 3430 MSDS |
| 标准包装： | 1 |
| 系列： | 3435 |
| 胶带类型： | 反射 |
| 胶合剂： | 压敏胶合剂（PSA） |
| 宽： | 0.75"（19.05mm）3/4" |
| 长度： | 15'（4.6m）5 码 |
| 颜色： | 蓝 |
| 使用： | 标记，反射 |
| 包装： | 散装 |
| 其它名称： | 3M10086 |
Engineer Grade Prismatic
Reflective Sheeting
Series 3430 with Pressure Sensitive Adhesive
Product Bulletin 3430-U.S.
October 2013
Replaces Product Bulletin 3430 dated July 2009
Description
3M ? Engineer Grade Prismatic Reflective Sheeting Series 3430 is a non-metalized microprismatic
lens retroreflective sheeting designed for production of reflective commercial signs and noncritical
traffic control signs that are exposed vertically in service. Series 3430 sheeting can easily be
identified by the visible integral “EGP” marking. When applied to properly prepared sign substrates,
Series 3430 sheeting provides long-term reflectivity and durability. Series 3430 sheeting is available
in the following colors.
Color
White
Yellow
Red
Blue
Green
Brown
Product Code
3430
3431
3432
3435
3437
3439
Sign Fabrication
Methods
Application
Series 3430 sheeting incorporates a pressure sensitive adhesive and should be applied to the sign
substrate at temperature of 65°F/18°C or higher by any of the following methods:
Mechanical squeeze roll applicator – Reference Information Folder 1.4.
Hand squeeze roll applicator — Reference Information Folder 1.6.
Hand application is recommended for copy only. See Information Folder 1.5.
All direct applied copy and border MUST be cut at all panel seams and squeegeed at the joint.
Splices
Series 3430 sheeting must be butt spliced when more than one piece of sheeting is used on one piece
of substrate. The sheeting pieces should not touch each other. This is to prevent buckling as the
sheeting expands when subject to extreme temperature and/or high humidity levels.
Double Faced Signs
The sheeting on the bottom side of a double faced sign can be damaged if rolled through a squeeze
roll applicator with an unprotected steel bottom roller. The use of a semi-soft flat sheet between the
steel roller and the applied sign face will provide protection from damage. A material such as a rubber
mat, tag board or cardboard is recommended.
相关PDF资料 |
PDF描述 |
|---|---|
| TQ2SS-L-3V-Z | RELAY TELECOM DPDT 2A 3V |
| TQ2SL-24V-Z | RELAY TELECOM DPDT 2A 24V |
| 7-1437661-5 | CONN BARRIER BLOCK COVER 2POS |
| TQ2SA-L-4.5V-Z | RELAY TELECOM DPDT 2A 4.5V |
| G5V-2 DC4.5 | RELAY GEN PURPOSE DPDT 2A 4.5V |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 34535 | 制造商:SCHOTT 制造商全称:SCHOTT 功能描述:LM259X Inductor 22 μHy .50 ADC |
| 345-350-10 | 制造商:Mitutoyo Corporation 功能描述:MIC, DIG INSIDE, .2-1.2" |
| 345-351-10 | 制造商:Mitutoyo Corporation 功能描述:MIC, DIG INSIDE , 1-2" |
| 34536 | 制造商:SCHOTT 制造商全称:SCHOTT 功能描述:LM259X Inductor 330 μHy .30 ADC |
| 34537 | 制造商:SCHOTT 制造商全称:SCHOTT 功能描述:LM259X Inductor 220 μHy .35 ADC |
发布紧急采购，3分钟左右您将得到回复。