参数资料
| 型号： | 3/4-5-9626 |
| 厂商： | 3M (TC) |
| 文件页数： | 3/4页 |
| 文件大小： | 0K |
| 描述： | TAPE ADHSIVE TRANSFER 3/4" X 5YD |
| MSDS 材料安全数据表： | 9626,9627,9628,9629 MSDS |
| 标准包装： | 1 |
| 系列： | 9626 |
| 胶带类型： | 胶粘传输带 |
| 胶合剂： | 丙烯酸 |
| 背衬，载体： | 纸 |
| 厚度： | 0.0052"（5.2 mils，0.132mm） |
| 厚度 - 胶合剂： | 0.0020"（2.0 mils，0.051mm） |
| 厚度 - 背胶，载体，衬垫： | 0.0032"（3.2 mils，0.081mm） |
| 宽： | 0.75"（19.05mm）3/4" |
| 长度： | 15'（4.6m）5 码 |
| 颜色： | 透明 |
| 温度范围： | 70 ~ 100°F（21 ~ 38°C） |
| 包装： | 散装 |
| 其它名称： | 3M9761 |
3M ? Adhesive Transfer Tape with Quick Bonding Adhesive 360
9626 ? 9627
Features
Application
Techniques
Environmental
Performance
Application Ideas
? Excellent adhesion to difficult to bond to surfaces such as HDPE, LDPE, and PP.
? Super quick stick.
? Higher adhesion from a thinner tape.
? Excellent solvent resistance.
? High temperature performance.
Bond strength is dependent upon the amount of adhesive-to-surface contact
developed. Firm application will assist the adhesive in developing intimate contact
with the bonding surface. To accelerate the adhesion process, additional heat, up to
130°F (54°C), may be used.
To obtain optimum adhesion, the bonding surfaces must be clean, dry, and well
unified. Some typical surface cleaning solvents are isopropyl alcohol or heptane. *
Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial
tape application to surfaces at temperatures below 50°F (10°C) is not recommended
because the adhesive becomes too firm to adhere readily. However, once properly
applied, low temperature holding is generally satisfactory.
* When using solvents, extinguish all ignition sources, including pilot lights, and
follow the manufacturers precautions and directions for use. These cleaning
recommendations may not be compliant with the rules of certain Air Quality
Management Districts in California; consult applicable rules before use.
Humidity Resistance: High humidity has minimal effect on adhesive performance.
No significant reduction in bond strength is observed after exposure for 7 days at
90°F (32°C) and 90% relative humidity.
UV Resistance: When properly applied, nameplates and decorative trim parts are
not adversely affected by exposure.
Water Resistance: Immersion in water has no appreciable effect on the bond
strength. After 100 hours at room temperature, the high bond strength is maintained.
Temperature Cycling Resistance: High bond strength is maintained after cycling
four times through:
8 hours at 194°F (90°C)
16 hours at -40°F (-40°C)
8 hours at 100.4°F (38°C/100% RH)
16 hours at -40°F (-40°C)
Chemical Resistance: When properly applied, nameplate and decorative trim parts
will hold securely after exposure to numerous chemicals including oil, mild acids,
and alkalis.
? Foam to powder coated painted surfaces.
? Low surface energy plastic adhesion.
-3-
相关PDF资料 |
PDF描述 |
|---|---|
| 12X12-6-9626 | TAPE ADHESIVE TRANSFER 12X12" |
| 1590B | BOX ALUM 4.41X2.38X1.22" UNPTD |
| H67ACPC,BK | BOX 4.94X2.75X1.275 AC W/CLP BLK |
| 1/2-5-1449 | TAPE ALUMINUM FOIL 1/2" X 5YD |
| 1-6-10-3431 | TAPE REFLECTIVE YELLOW 1X6" |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 34597 | 制造商:SCHOTT 制造商全称:SCHOTT 功能描述:LM259X Inductor 15 μHy 2.00 ADC |
| 3-459736-2 | 功能描述:折皱器 CRIMPER WIRE F SLICE TYPE RoHS:否 制造商:Hirose Connector 类型: 描述/功能:Cable and Shield Crimper |
| 3-459736-3 | 功能描述:折皱器 CRIMPER, WIRE F SPLICE TYPE RoHS:否 制造商:Hirose Connector 类型: 描述/功能:Cable and Shield Crimper |
| 3-459736-4 | 功能描述:折皱器 CRIMPER, WIRE F SPLICE TYPE RoHS:否 制造商:Hirose Connector 类型: 描述/功能:Cable and Shield Crimper |
| 3-459736-5 | 功能描述:折皱器 CRIMPER WIRE F SLICE TYPE RoHS:否 制造商:Hirose Connector 类型: 描述/功能:Cable and Shield Crimper |
发布紧急采购，3分钟左右您将得到回复。