参数资料
型号: 3341-05
厂商: Peregrine Semiconductor
文件页数: 5/16页
文件大小: 0K
描述: EVAL KIT FOR PE3341
标准包装: 1
系列: UltraCMOS™
类型: 整数 N/PLL
频率: 2.7GHz
适用于相关产品: PE3341
已供物品: 板,线缆,文档,软件
其它名称: 3341-05-ND
3341-5PER
PE3341EK
Product Specification
PE3341
Page 13 of 17
Document No. 70-0053-05
www.psemi.com
2005-8 Peregrine Semiconductor Corp. All rights reserved.
Evaluation and Programming Kit Support
To provide easy evaluation of the PE3341 and to
also enable programming of small evaluation
quantities, Peregrine has developed complete
evaluation kits and programming kits for the
PE3341 EEPROM PLLs.
Evaluation Kits
The evaluation kits consist of an evaluation board
and support software enabling the user to
evaluate the full functionality of the part. The
EEPROM can be loaded with user specified
values and then placed in a self start-up mode.
Please refer to Table 14, Ordering Information, for
the specific order codes.
Programming Kits
The programming kits consist of a programming
board and support software that enables the user
to program small quantities of devices for
prototype evaluation and for small pre-production
runs. Please refer to Table 14, Ordering
Information, for the specific order codes
Large production quantities can be special
programmed at Peregrine for an additional
charge. Please contact Peregrine Sales for pricing
and leadtime at sales@psemi.com.
Application Information
The PE3341 has been designed to allow a self-
starting PLL synthesizer to be built, removing the
need to have a micro-controller or other
programming source load data into the device on
power-up. It can be used as a remotely
controllable PLL as well, since the EEPROM
circuitry has been added to a complete PLL core
(PE3339).
The PE3341’s EEPROM can be programmed in-
circuit, or prior to assembly using a socketed
fixture.
It can be reprogrammed a minimum of 100 times,
but is not designed to support constant
reprogramming of the EEPROM by an application.
Self-Starting Mode
In self-starting applications, the EE Register is
used to control the device and must be selected
per Table 9. Additionally, the contents of the
EEPROM must be copied to the EE Register per
Table 10, and device power must be stable for this
transfer to be reliably accomplished. These
requirements can be met by connecting a
capacitor of 50pF-10uF (evaluation design uses
3.3uF) from the EESel pin to ground. The delay of
the rising edge on EESel, created by the RC time
constant of its 70k ohm internal pull-up resistor
and the external capacitor, will allow device power
to stabilize first, ensuring proper data transfer.
This edge is adaptable by capacitor value
selection. The Vcc applied to the IC must be
settled first.
Obsolete
Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com
相关PDF资料
PDF描述
DR-TRC105-403-DK DEV KIT TRC105
DR-TRC105-345-DK DEV KIT TRC105
DR-TRC105-450-DK DEV KIT TRC105
GLEB24A2B SWITCH SIDE-ROTRY ROLL SNAP DPDT
SX1223SK433 KIT STARTER FOR XE1223 433MHZ
相关代理商/技术参数
参数描述
3341-07 功能描述:PROGRAMMING BOARD FOR PE3341 RoHS:是 类别:RF/IF 和 RFID >> RF 评估和开发套件,板 系列:UltraCMOS™ 标准包装:1 系列:- 类型:GPS 接收器 频率:1575MHz 适用于相关产品:- 已供物品:模块 其它名称:SER3796
334-10PK 功能描述:LAMP INCAND T1-3/4 MIDGE GROOVE RoHS:是 类别:光电元件 >> 灯 - 白炽灯,氖灯 系列:- 标准包装:100 系列:- 颜色:透明 透镜样式/尺寸:圆形,带圆顶,5mm,T-1 3/4 引线型:小型凹槽 MSCP(平均球面烛光):0.3 额定电压:60V 其它名称:913.4005913.4005-ND
33411 功能描述:TOOL HEX DRVR T-HAND 5.0MM 232MM RoHS:否 类别:工具 >> 螺钉和螺母驱动器 系列:- 标准包装:1 系列:- 类型:六角扳手(内六角扳手)- 偏移 尺寸:0.098"(2.5mm) 特点:- 长度 - 叶片:0.70"(18mm) 长度 - 总体:2.17"(55mm) 重量:0.01 磅(4.54g) 其它名称:35112WI
3341-10 功能描述:D-Sub工具与硬件 JACK SOCKET SCREWS RoHS:否 制造商:3M Electronic Solutions Division 产品:Accessories 类型:Strain Relief, 36 Position 用于:Wiremount D-Sub Connectors
3341-10 BULK 制造商:3M Electronic Products Division 功能描述:80610655120 3341-10=J/SOCKET/MDR/M2.5-M2.5/200BULK