参数资料
| 型号： | 4-5-4466W |
| 厂商： | 3M (TC) |
| 文件页数： | 3/4页 |
| 文件大小： | 0K |
| 描述： | TAPE DOUBLE COAT POLY 4"X5YD |
| MSDS 材料安全数据表： | 4462(B,W), 4466(B,W) MSDS |
| 标准包装： | 1 |
| 系列： | 4466W |
| 胶带类型： | 双涂层，双面 |
| 胶合剂： | 橡胶 |
| 背衬，载体： | 聚乙烯泡沫 |
| 厚度： | 0.063"（63 mils，1.600mm）1/16" |
| 宽： | 4.00"（101.60mm）1/3' |
| 长度： | 15'（4.6m）5 码 |
| 颜色： | 白 |
| 使用： | 保持，连接，安装 |
| 包装： | 散装 |
3M ? Double Coated Polyethylene Foam Tapes
4462W ? 4462B ? 4466W ? 4466B ? 4492G ? 4492W ? 4492B ? 4496W ? 4496B
Application Techniques
Application Ideas
Features
Application Equipment
? Bond strength is dependent upon the amount of adhesive-to-surface contact
developed. Firm application pressure helps develop better adhesive contact and
improve bond strength.
? To obtain optimum adhesion, the bonding surfaces must be clean, dry and well
unified. Typical surface cleaning solvents are isopropyl alcohol and water (rubbing
alcohol) or water. Note: Be sure to follow the manufacturer’s precautions and
directions for use when using cleaning solvents.
? Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial
tape application to surfaces at temperatures below 50°F (10°C) is not recommended
because the adhesive becomes too firm to adhere readily. However, once properly
applied, low temperature holding is generally satisfactory.
? The foam construction makes these products ideal for many joining, mounting,
gasketing, and sealing applications involving irregular surfaces.
? 3M? Double Coated Polyethylene Foam Tapes 4462 and 4466 are specially
formulated for many indoor general purpose mounting and joining applications,
including bonding to polyethylene, polypropylene and many other plastics, where
moderate temperature and shear performance are required.
? 3M? Double Coated Polyethylene Foam Tapes 4492 and 4496 are formulated for
more demanding indoor and moderate outdoor general purpose mounting and
joining applications.
? Application ideas for these tapes include:
– Signs, Nameplates and Plaques
– Point of Purchase and other Displays
– Plastic Hooks, Racks and Dispensers
– Wire and Cable Clips
– Appliance, Display Case and Electronic Equipment Trim
? 3M? Double Coated Polyethylene Foam Tapes 4492 and 4496 series complies
with the performance requirements of American Architectural Manufacturer ’s
Association, AAMA 810.1-92 for Expanded Cellular Glazing Tape, Type 1.
To apply adhesives in a wide web format, lamination equipment is required to
ensure acceptable quality. To learn more about working with pressure-sensitive
adhesives please refer to technical bulletin, Lamination Techniques for Converters
of Laminating Adhesives (70-0704-1430-8).
For additional dispenser information, contact your local 3M sales representative, or
the toll free 3M sales assistance number at 1-800-362-3550.
-3-
相关PDF资料 |
PDF描述 |
|---|---|
| PVG612A | RELAY PHOTOVO 60V 2AMP 6-DIP |
| 2-1437653-6 | BARRIER STRIP 9CIRC .375 |
| 1301550156 | CONN SAFEWAY 50A 3P4W 250V/3PH |
| 1546840-6 | CONN BARRIER BLOCK 6CIRC 9.53MM |
| 2-1437416-8 | BARRIER STRIP 8CIRC VERT .438" |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 454476-1 | 制造商:TE Connectivity 功能描述:CLIP, SPRING-REPLACEMENT SOLEN - Bulk |
| 454479/2/MK | 制造商:Lucas Stability 功能描述:STD WAFER 1P 12W METRIC |
| 454479MK | 制造商:Lucas Stability 功能描述:STD WAFER 1P 12W METRIC |
| 454480MK | 制造商:Lucas Stability 功能描述:STD WAFER 2P 6W METRIC |
| 454481MK | 制造商:Lucas Stability 功能描述:STD WAFER 3P 4W METRIC |
发布紧急采购，3分钟左右您将得到回复。