参数资料
型号: 405EZ
厂商: Applied Micro Circuits Corp.
英文描述: PowerPC 405EZ Embedded Processor
中文描述: 嵌入式处理器的PowerPC 405EZ
文件页数: 28/54页
文件大小: 362K
代理商: 405EZ
PPC405EZ – PowerPC 405EZ Embedded Processor
34
AMCC Proprietary
Revision 1.27 - August 22, 2007
Preliminary Data Sheet
Pin Group List
The following table provides a summary of the number of package pins (balls) associated with each functional
interface group.
In the table “Signal Functional Description” on page 35, each external signal is listed along with a short description
of the signal function. Active-low signals (for example, Halt) are marked with an overline. See the preceding table,
“Signals Listed Alphabetically” on page 17, for the pin (ball) number to which each signal is assigned.
Multiplexed Pins
Some signals are multiplexed on the same package pin so that the pin can be used for different functions. In most
cases, the signal names shown in this table are not accompanied by signal names that may be multiplexed on the
same pin. If you need to know what, if any, signals are multiplexed with a particular signal, look up the name in
“Signals Listed Alphabetically” on page 17. It is expected that in any single application a particular pin will always
be programmed to serve the same function. The flexibility of multiplexing allows a single chip to offer a richer pin
selection than would otherwise be possible.
Initialization Strapping
One group of pins is used as strapped inputs during system reset. These pins function as strapped inputs only
during reset and are used for other functions during normal operation (see “Initialization” on page 51). Note that the
use of these pins for strapping is not considered multiplexing since the strapping function is not programmable.
Pull-Up and Pull-Down Resistors
Pull-up and pull-down resistors are used for strapping during reset and to retain unused or undriven inputs in an
appropriate state. The recommended pull-up value of 3k
Ω to +3.3V and pull-down value of 1kΩ to GND, applies
only to individually terminated signals. To prevent possible damage to the device, I/Os capable of becoming
outputs must never be tied together and terminated through a common resistor.
If your system-level test methodology permits, input-only signals can be connected together and terminated
through either a common resistor or directly to +3.3V or GND. When a resistor is used, its value must ensure that
the grouped I/Os reach a valid logic zero or logic one state when accounting for the total input current into the
PPC405EZ.
Table 5. Pin Groups
Group
No. of Pins
Total Signal Pins
200
VDD
12
OVDD1
17
OVDD2
11
GND
77
ADC_AVDD
1
ADC_GND
1
DAC_AVDD
1
DAC_GND
1
PLL_AVDD
1
PLL_GND
1
Reserved
1
Total Pins
324
相关PDF资料
PDF描述
405GPR Power PC 405GPr Embedded Processor
405GP Power PC 405GP Embedded Processor
4060120000 RELAY,MICROSERIES 24 V,1CO
4060EFE Standalone Linear NiMH/NiCd Fast Battery Charger
40659 2.5 mm2, BRASS, RING TERMINAL
相关代理商/技术参数
参数描述
405F 功能描述:鼓风机 40x10mm 5VDC 4.7CFM .7W 5400RPM 23dBA SB RoHS:否 制造商:Murata 产品:Blowers 电流类型:DC 电源电压:5.3 V 气流:1 l/min 轴承类型: 噪声: 速度: 功率额定值: 框架尺寸 (mm):20 mm x 20 mm x 1.85 mm 外壳材料: 端接类型:SMD/SMT 系列:MZB
405F 制造商:ebm-papst Inc 功能描述:FAN 40MM 5VDC
405F/2H 功能描述:风扇 40x40x10mm 5VDC RoHS:否 制造商:Sanyo Denki 产品:Fans 电流类型: 电源电压:48 V 气流:636 CFM 轴承类型: 噪声:83 dBA 速度:6400 RPM 功率额定值:264 W 框架尺寸 (mm):172 mm x 150 mm x 102 mm 外壳材料:Aluminum 端接类型:Wire 系列:
405FH 功能描述:鼓风机 40x10mm 5VDC 5.3CFM .9W 6000RPM 26dBA SB RoHS:否 制造商:Murata 产品:Blowers 电流类型:DC 电源电压:5.3 V 气流:1 l/min 轴承类型: 噪声: 速度: 功率额定值: 框架尺寸 (mm):20 mm x 20 mm x 1.85 mm 外壳材料: 端接类型:SMD/SMT 系列:MZB
405F-RS0 制造商:ebm-papst Inc 功能描述:Fan,connector,inserts, 40mm 8cu.m/h 5V