参数资料
型号: 40IMX15-05-05-9K-G
厂商: POWER-ONE INC
元件分类: 电源模块
英文描述: 2-OUTPUT 14 W DC-DC REG PWR SUPPLY MODULE
封装: 2 INCH X 1.600 INCH, 10.50 MM HEIGHT, PACKAGE-7
文件页数: 17/20页
文件大小: 186K
代理商: 40IMX15-05-05-9K-G
Board Mountable
DC-DC Converters
IMX/IMY 15 Series
Edition 5/06.2001
6/20
Inrush current
The inrush current has been kept as low as possible by
choosing a very small input capacitance. A series resistor
may be installed in the input line to further reduce this cur-
rent.
I [A]
t [
s]
04022
0
10
20
30
40
50
60
70
80
90 100
4
3
2
1
Fig. 6
Typical inrush current at Ui nom, Po nom versus time
(40 IMX 15). Source impedance according to
ETS 300132-2 at Ui nom.
Fig. 7
Converter start-up and rise time
Uo nom
Uo
tstart up
trise
t
04008
Input Undervoltage Lockout
A special feature of these units is the accurate undervoltage
lockout protection which protects the units (and system)
from large currents caused by operation at low voltages.
This ensures easier start-up in distributed power systems.
Table 3: Turn on and turn off voltage
Type
Turn On
Turn Off
Units
20 IMX
7.5...8
7...7.5
V
40 IMX
12.5...13.5
12...13
110 IMY
40...42.5
38...40.5
Input Transient Voltage Protection
A built-in suppressor diode provides effective protection
against input transients which may be caused for example
by short-circuits accross the input lines where the network
inductance may cause high energy pulses.
Table 5: Built-in transient voltage suppressor
Type
Breakdown
Peak power
Peak pulse
voltage
at 1 ms
current
VBr nom [V]
Pp [W]
Ipp [A]
20 IMX 15
40
1500
22
40 IMX 15
100
1500
9.7
110 IMY 15
168
600
0.5
For very high energy transients as for example to achieve
IEC/EN 61000-4-5 or ETR 283 (19 Pfl1) compliance (as per
table:
Electromagnetic Immunity) an external inductor and
capacitor are required. The components should have simi-
lar characteristics as listed in table:
Components for exter-
nal circuitry for IEC/EN 61000-4-5, level 2 or ETR 283
(19Pfl1) compliance.
Note: The suppressor diode D is only necessary for
20 IMX 15 types.
Table 6: Components for external circuitry for IEC/EN
61000-4-5, level 2 or ETR 283 (19Pfl1) compliance.
Type
Inductor (L)
Capacitor (C)
Diode (D)
20 IMX
68
H, 2.7 A
330
F, 63 V
1.5 k E47A
40 IMX
220
H, 1.3 A
2
× 100 F, 100 V
-
110 IMY
330
H, 0.43 A
2
× 100 F, 200 V
-
Vi+
Vi–
C
L
D
+
04036
Fig. 8
Example for external circuitry to comply with IEC/EN
61000-4-5 or ETR 283 (19Pfl1); the suppressor diode D is
only necessary for 20 IMX 15 types.
Reverse Polarity Protection
The built-in suppressor diode also provides for reverse po-
larity protection at the input by conducting current in the re-
verse direction. An external fuse is required to limit this cur-
rent.
Table 4: Recommended external fuses
Converter type
Fuse type
20 IMX 15
F4.0A
40 IMX 15
F2.0A
110 IMY 15
F1.0A
10
5
10
04051
Fig. 9
Dimensions of inductor L for 110 IMY 15 types
(e.g. TOKO 494LYF-0098K).
22
23.8
11.5
04052
Fig. 10
Dimensions of inductor L for 20 IMX 15 and 40 IMX 15
types (e.g. Coil Craft, PCH-45 series).
相关PDF资料
PDF描述
40IMX35-05-05-8Z 2-OUTPUT 35 W DC-DC REG PWR SUPPLY MODULE
20IMX35-12-12-8I 2-OUTPUT 35 W DC-DC REG PWR SUPPLY MODULE
40PC500G1A GAGE, PEIZORESISTIVE PRESSURE SENSOR, 0-500Psi, 0.2%, 4.5V, RECTANGULAR, SURFACE MOUNT
40T-1 POWER TRANSFORMER, 40 VA
410-13-246-41-001 IC SOCKET
相关代理商/技术参数
参数描述
40IMX15-05-8R 功能描述:DC/DC转换器 15W (5V) DC Input (16.8-75V) RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压(标称): 输出端数量:1 输出电压(通道 1):3.3 V 输出电流(通道 1):600 mA 输出电压(通道 2): 输出电流(通道 2): 安装风格:SMD/SMT 封装 / 箱体尺寸:
40IMX15-05-8RG 功能描述:DC/DC转换器 15W (5V) DC Input (16.8-75V) RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压(标称): 输出端数量:1 输出电压(通道 1):3.3 V 输出电流(通道 1):600 mA 输出电压(通道 2): 输出电流(通道 2): 安装风格:SMD/SMT 封装 / 箱体尺寸:
40IMX15-05-8RG-G 功能描述:DC/DC CONVERT 5.1V 3.5A 制造商:bel power solutions 系列:* 零件状态:新产品 标准包装:12
40IMX15-05-9R 制造商:Power-One 功能描述:
40IMX15-05-9RG 制造商:Power-One 功能描述: