All modules (including yellow) meet the ITE VTCSH-LED
Circular Signal Supplement over the full temperature
range of -40°C to +74°C
EPACT 2005 compliant
Robust Hi-Flux LED Technology
Meets or exceeds ITE uniformity specifications
(Better than 10-to-1)
Expanded view radiation pattern suitable for span wire
and steep grade applications
Transient suppression exceeds ITE and NEMA
specifications (Up to 6KV)
Lowest wattage Red, Yellow, Green package on the market
Meets or exceeds ITE moisture intrusion specifications
Meets or exceeds ITE failed state impedance specifications
Hard coated lenses for abrasion resistance
FEATURES / BENEFITS
ITE COMPLIANT
“XL” Series
LED TRAFFIC SIGNALS
SPECIFICATIONS
Operating Voltage Range:
80VAC to 135VAC (120VAC nominal)
Operating Temperature Range: -40°C to +74°C
Turn-on / Turn-off Time < 75 msec
Power Factor > 0.9
Total Harmonic Distortion < 20%
Meets FCC Title 47, Subpart B, Section 15
regulations for electrical noise
Failed State Impedance > 250K ohm within 300ms
Conforms to MIL-STD-810F for blowing rain
Conforms to MIL-STD-883, Test Method 2007,
for mechanical vibration
Conforms to MIL-STD-883, Test Method 1010,
temperature cycling requirements
Dialight Corporation
1501 Route 34 South Farmingdale, NJ 07727 USA
Tel: (1) 732-919-3119 Fax: (1) 732-751-5778 www.dialight.com
Provided with quick connect terminals and spade
adapters
Written manufacturer’s warranty available on request
All products traceable by serial number
Luminance uniformity and color uniformity exceed
ITE VTCSH-LED Circular Signal Supplement
requirements
Transient suppression exceeds ITE VTCSH-LED
Circular Supplement requirements and meets the
following standards:
NEMA TS-2 Sec. 2.1.6 and Sec. 2.1.8
IEC 1000-4-5, 3KV, 2 ohm source impedance
ANSI/IEEE C62, 41-2002; IEC 61000-4-12,
6KV, 200A, 100KHz ring wave
Power supply is conformally coated for robust
operation
MDTS433XL001_E
WE MEET THE NEW
ITE REQUIREMENTS
EVEN YELLOW AT 74°C
LOWEST WATTAGE
RED, YELLOW, GREEN
PACKAGE ON THE MARKET
Dialight reserves the right to make changes at any time
in order to supply the best product possible.
Lighting Uniformity & ITE Conformity