- 您现在的位置：买卖IC网 > PDF目录232983 > 44A60-01-1-02N (GRAYHILL INC) ROTARY SWITCH-2POSITIONS, SPDT, LATCHED, 1A, 28VDC, PANEL MOUNT-THREADED PDF资料下载
参数资料
| 型号： | 44A60-01-1-02N |
| 厂商： | GRAYHILL INC |
| 元件分类： | 开关 |
| 英文描述： | ROTARY SWITCH-2POSITIONS, SPDT, LATCHED, 1A, 28VDC, PANEL MOUNT-THREADED |
| 封装： | ROHS COMPLIANT |
| 文件页数： | 9/10页 |
| 文件大小： | 1279K |
| 代理商： | 44A60-01-1-02N |
Grayhill, Inc. 561 Hillgrove Avenue LaGrange, Illinois
60525-5997 USA Phone: 708-354-1040 Fax: 708-354-2820 www.grayhill.com
Rotary
Switches
Multi-Deck Rotary Switches
SPECIFICATIONS:
MIL-S-3786 Electrical Values
Military Style
Style M switches, at 85°C, approximately
68% humidity and sea level pressure and
style H and HS at 125°C have been tested to
make and break the following loads as stated
in MIL-DTL-3786/SR04; 250 milliamperes at
28 Vdc resistive, 100 milliamperes at 28 Vdc
inductive (2.8 henries); 75 milliamperes at
115 Vac resistive.
These switches have also been tested at
reduced barometric pressure (70,000 feet),
25°C at approximately 68% relative humidity
to make and break the following loads as
stated
in
MIL-DTL-3786/SR04;
200
milliamperes, 28 Vdc resistive; 25 milliamperes,
28 Vdc inductive (2.8 henries); 20
milliamperes, 115 Vac resistive. When tested
to these loads and conditions the style M, H
and HS switches meet the following life limiting
or failure criteria after 25,000 cycles in
accordance with MIL-S-3786.
Contact Resistance: 50 milliohms maximum
Insulation Resistance: 1,000 megaohms
minimum between terminals and shafts
Dielectric Strength: 1,000 Vac (atmospheric
pressure) and 450 Vac (reduced pressure)
minimum between mutually insulated parts.
When tested at sea level 25°C and 68%
relative humidity with failure criteria of 50
milliohms max. and 750 Vac breakdown
voltage, these switches will make and break
the following loads: 250 mA at 28 Vdc,
inductive (2.8 henries); 1.25 amps at 28 Vdc
resistive; 2.0 amps at 115 Vac, 60 Hz resistive,
for 10,000 cycles.
These switches also meet MIL-DTL-3786/SR04
for moisture resistance, medium and high shock,
vibration (10 to 2000 cps), thermal shock (-
65°C to 125°C), salt spray, explosion and
terminal pull.
Materials and Finishes
Standard Style
Bases: Melamine per (MIL-M-14) ASTM-D-
5948
Cover, Deck Separators, End Plate and Rotor
Mounting Plate: Phenolic per (MIL-M-14)
ASTM-D-5948
Mounting Bushings: Brass, tin/zinc-plated.
Shaft, Cover Plate, Retaining Rings, Through
Bolts, Shaft Extensions, Stop Arm, Thrust
Washers Stop Washers and Rear Support
Plate: Stainless Steel
Detent Balls: Steel, nickel-plated
Detent Springs: Tinned music wire
Rotor Contact, Stator (Base) Contacts: Silver
alloy
Terminals (Except Common): Brass, tin plated
Common Plate, Including Solder Lug: Brass,
silver-plated .0003" minimum
Mounting Hardware: Two mounting nuts .094"
(2,39) thick by .562" (14,27) across flats and
one internal tooth lockwasher are supplied
with each switch.
Stud Nuts, Mounting Nuts, Lock Washers:
Tin/zinc-plated or stainless steel.
Materials and Finishes
Military Qualified
Bases: Diallyl per (MIL-M-14) ASTM-D-5948
Cover, Deck Separators, End Plate and Rotor
Mounting Plate: Diallyl per (MIL-M-14) ASTM-
D-5948
Mounting Bushings: Brass, tin/zinc-plated.
Shaft, Cover Plate, Retaining Rings,
Through Bolts, Shaft Extensions, Stop
Arm, Stop Washers, Thrust Washers and
Rear Support Plate: Stainless steel
Detent Balls: Steel, nickel-plated
Detent Springs: Tinned music wire
Rotor Contact: Silver alloy
Terminals, Common Plate including
Solder Lug: Brass, silver-plated .0003"
minimum
Mounting Hardware: Two mounting nuts
.094" thick by .562" across flats and one
internal tooth lockwasher are supplied with
each switch.
Stud Nuts, Mounting Nuts, Lock Washers:
Tin/zinc-plated or stainless steel.
Additional Characteristics
Standard Style and Military Qualified
Contact: Shorting or non-shorting wiping
contacts with over 150 grams of contact
force
Rotational Torque: 8-115 ounce-inches
depending upon the number of poles per
deck, number of decks and angle of throw
Mechanical Life Expectancy: 100,000
cycles of operation
Shaft Flat Orientation: Flat opposite
contacting position of pole number one (See
circuit diagram).
Stop Strength: For Standard style: 15 pound-
inches minimum. For Adjustable stop styles:
12 pound-inches
Extended Stud: Single shaft switches of six
or more decks and concentric shaft switches
of a combination of five or more decks
(Standard style) or four or more decks (Military
style) have longer studs with extra mounting
nuts for recommended double end mount.
Rotary
29
相关PDF资料 |
PDF描述 |
|---|---|
| 47A3P5J6V2RT | ROCKER SWITCH, 3PDT, LATCHED AND MOMENTARY, 0.02A, 20VDC, THROUGH HOLE-STRAIGHT |
| 4002UL | PUSHBUTTON SWITCH, SPST, MOMENTARY, PANEL MOUNT-THREADED |
| 47A3P5R4S6RT | ROCKER SWITCH, 3PDT, LATCHED AND MOMENTARY, 0.02A, 20VDC |
| 47A3P5J1M7RT | ROCKER SWITCH, 3PDT, LATCHED AND MOMENTARY, 0.02A, 20VDC, THROUGH HOLE-RIGHT ANGLE |
| 47A4P1J4M6QT | ROCKER SWITCH, 4PDT, LATCHED, 5A, 28VDC, THROUGH HOLE-RIGHT ANGLE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 44A60-01-1-03N | 制造商:Grayhill 功能描述:SWIT ROTARY SP 3 SHAFT SLDR LUG 5A 115VAC 28VDC - Bulk 制造商:Grayhill 功能描述:SWITCH ROTARY SP3T 制造商:Grayhill 功能描述:1IN MULTI-DECK ROTARY SWITCH 制造商:Grayhill 功能描述:Rotary Switch, Standard, solder lug, 60°, , 1 deck, 1 pole/deck, 3 positions/p 制造商:Grayhill 功能描述:Switch Rotary SP3T 3 Flatted Shaft Solder Lug 5A 115VAC 28VDC |
| 44A60-01-1-04N | 制造商:Grayhill 功能描述:SWIT ROTARY SP 4 SHAFT SLDR LUG 5A 115VAC 28VDC - Bulk 制造商:Grayhill 功能描述:SWITCH ROTARY SP4T 制造商:Grayhill 功能描述:Rotary Switch, Standard, solder lug, 60°, 1 deck, 1 pole/deck, 4 positions/pole, non-shorting 制造商:Grayhill 功能描述:Switch Rotary SP4T 4 Flatted Shaft Solder Lug 5A 115VAC 28VDC |
| 44A60-01-1-04N | 制造商:Grayhill 功能描述:Switch Rotary SP4T 4 Flatted Shaft Solder Lug 5A 115VAC 28VDC |
| 44A60-01-1-05N | 制造商:Grayhill 功能描述:SWIT ROTARY SP 5 SHAFT SLDR LUG 5A 115VAC 28VDC - Bulk 制造商:Grayhill 功能描述:SWITCH ROTARY SP5T 制造商:Grayhill 功能描述:Switch Rotary SP5T 5 Flatted Shaft Solder Lug 5A 115VAC 28VDC |
| 44A60-01-1-06N | 功能描述:SWITCH ROTARY SP-6POS NONSHT RoHS:是 类别:开关 >> 旋转 系列:44 RoHS指令信息:435123-1 Statement of Compliance 产品目录绘图:Rotary Switch 特色产品:TE Connectivity Switches 3D 型号:435123-1.pdf 标准包装:1 系列:6000 位置数:10 层数:1 每层电极数:- 每层电路:BCD 触点额定电压:0.125A @ 115VAC 触动器类型:旋钮 安装类型:PCB，通孔 端接类型:PC 引脚 方向:垂直 摆角:36° 产品目录页面:2570 (CN2011-ZH PDF) 其它名称:435123-1-ND450-1183A26201A26201-ND |
发布紧急采购，3分钟左右您将得到回复。