- 您现在的位置：买卖IC网 > Datasheet目录599 > 47821 (TE Connectivity)DIE TERMINYL 69051 6AWG Datasheet资料下载
参数资料
| 型号： | 47821 |
| 厂商： | TE Connectivity |
| 文件页数： | 5/8页 |
| 文件大小： | 0K |
| 描述： | DIE TERMINYL 69051 6AWG |
| 标准包装： | 1 |
| 系列： | * |
408- 1729
NOTE
i
If butt splice sticks in die after crimping, apply a
rocking action to the butt splice to remove it from
the die. Wipe light oil on dies to reduce sticking,
or use spray dry lubricant.
NOTE Be sure to re--assemble locator onto stationary
die after crimping PLASTI--GRIP butt splices.
i
10. Inspect the crimp according to Section 5.
9. To crimp the other half of butt splice, reposition
uncrimped end of splice in the stationary die and
follow the same procedure used to crimp the first
half of splice.
5. CRIMP INSPECTION
Inspect crimped terminals and splices by checking the
features described in Figure 8. Use only the terminals
and splices that meet the conditions shown in the
“ACCEPT” column.
ACCEPT
REJECT
8
1
3
4
5
Wire Size
Stamped
Here
3
4
1
10
5
2
4
4
4
4
4
Wire Size
Stamped
Here
4
2
Wire Size
Stamped
Here
3
6
3
2
5
4
2
Wire Size
Stamped
Here
4
4
5
9
Wire Size
Stamped
Here
7
6
9
10
10
8
2
4
1
2
End of wire conductor is flush with or extends beyond edge of
terminal wire barrel a maximum of 1.60 [.063].
Wire fully inserted.
1
2
End of wire conductor not flush with or extending slightly
beyond end of terminal wire barrel.
Wire not inserted fully or wrong strip length used.
3
Crimp centered on wire barrel.
3 Crimp not centered on terminal wire barrel. Terminal wire
barrel was not butted against locator when crimped.
4
5
6
Wire size is the same as wire size stamped on terminal
tongue, splice body, and wire barrel.
Proper color code, wire size, and tooling combination used.
Wire conductors butted against wire stop, or flush with or
extended slightly beyond edge of splice wire barrel.
4
5
6
7
8
Wire size not the same as wire size stamped on terminal
tongue, splice body, and wire barrel.
Wrong color code, wire size, and tooling combination used.
End of wire conductor not visible. Conductor did not butt
against wire stop, or was not flush with or extended slightly
beyond splice wire barrel.
Crimp not centered on splice wire barrel. Edge of window
indent did not butt against locator when crimped.
Nicked or missing wire strands.
9 Splice was reversed in die (locator was not oriented with
window indent) when crimped.
10 Excessive “flash” or extruded wire insulation (die was either
damaged or incompatible when crimped).
Figure 8
Rev J
5 of 8
相关PDF资料 |
PDF描述 |
|---|---|
| 48040 | DAHT PIDG SH FLAG 14-20AWG |
| 48753-1 | TOOL DIE AMPLI-BOND 69051 6AWG |
| 48754-1 | TOOL DIE AMPLI-BOND 69051 4AWG |
| 48755-1 | TOOL DIE AMPLI-BOND 69051 2AWG |
| 48818 | DIE SOLIS 69060 400-478MCM |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 4782-1 | 制造商:TE Connectivity 功能描述: |
| 47-82-101-10 | 制造商:Southco 功能描述: |
| 47-82-111-10 | 制造商:Southco 功能描述: |
| 478214-000 | 制造商:TE Connectivity 功能描述:LABEL IDENTIFICATION TAPE |
| 47-82-182-10 | 制造商:Southco 功能描述: |
发布紧急采购，3分钟左右您将得到回复。