3
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M SIP Socket
Screw Machine, Low Profile
500 Series
Physical
Electrical
Environmental
*"RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration
values in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury,
hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by
3M in writing, this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M.
Insulation Material: Glass Filled Polyester
Flammability: UL 94V-0
Color: Black
Contact Material:
Sleeve: Brass
Inner contact: Beryllium Copper
Plating Underplating: 100
μ″ [ 2.54 μm ] min. Nickel
Wiping Area: 8
μ″ [ .02 μm ] min. Gold
Terminal Area:
Gold flash (RoHS compliant)
Mating Device Leads
Rectangular Lead: W 0.38~0.50 mm X T 0.20~0.40 (0.50 mm max. Diagonal)
Circular Lead: 0.40~0.50 mm
Length: 1.8 mm min.
Marking: None
Current Resistance: < 25m
Ω
Current Rating: 1 A
Insulation Resistance: 1,000 M
Ω at 500 V
DC
Withstanding Voltage: 1000 VAC rms for 1 minute
Temperature Rating:
-65
°C to +125°C
Process Rating: 260
°C max. for 5 seconds, (Dipping: One time) Not for reflow soldering.
TS-2119-B
Sheet 1 of 2
Date Modified: August 8, 2008
Standard 32 pin strip can be cut to length
Reliable four finger contact interface
Lower contact point enables lower total profile
Inner contact aligned to maximize contact
surface area
Can be used in pairs to simulate DIP
configuration
Side and end stackable for board and design
flexibility
RoHS* compliant
DISCONTINUED