- 您现在的位置：买卖IC网 > PDF目录248541 > 514EAAXXXXXXBAG (SILICON LABORATORIES) 250 MHz, OTHER CLOCK GENERATOR, PDSO6 PDF资料下载
参数资料
| 型号： | 514EAAXXXXXXBAG |
| 厂商： | SILICON LABORATORIES |
| 元件分类： | XO, clock |
| 英文描述： | 250 MHz, OTHER CLOCK GENERATOR, PDSO6 |
| 封装： | 3.20 X 5 MM, ROHS COMPLIANT PACKAGE-6 |
| 文件页数： | 15/32页 |
| 文件大小： | 267K |
| 代理商： | 514EAAXXXXXXBAG |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页当前第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页
Si514
22
Preliminary Rev. 0.9
4.3. I2C Interface
Configuration and operation of the Si514 is controlled by reading and writing to the RAM space using the I2C
interface. The device operates in slave mode with 7-bit addressing and can operate in Standard-Mode (100 kbps)
or Fast-Mode (400 kbps). Burst data transfer with auto address increments are also supported.
The I2C bus consists of a bidirectional serial data line (SDA) and a serial clock input (SCL). Both the SDA and SCL
pins must be connected to the VDD supply via an external pull-up as recommended by the I2C specification. The
Si514 7-bit I2C slave address is user-customized during the part number configuration process. See "5. Pin
Descriptions" on page 24 for more details.
Data is transferred MSB first in 8-bit words as specified by the I2C specification. A write command consists of a 7-
bit device (slave) address + a write bit, an 8-bit register address, and 8 bits of data as shown in Figure 5.
A write burst operation is also shown where every additional data word is written using an auto-incremented
address.
Figure 5. I2C Write Operation
A read operation is performed in two stages. A data write is used to set the register address, then a data read is
performed to retrieve the data from the set address. A read burst operation is also supported. This is shown in
1 – Read
0 – Write
A – Acknowledge (SDA LOW)
N – Not Acknowledge (SDA HIGH)
S – START condition
P – STOP condition
From slave to master
From master to slave
Write Operation – Single Byte
S
0 A Reg Addr [7:0]
Slv Addr [6:0]
A
Data [7:0]
P
A
Write Operation - Burst (Auto Address Increment)
Reg Addr +1
S
0 A Reg Addr [7:0]
Slv Addr [6:0]
A
Data [7:0]
A
Data [7:0]
P
A
相关PDF资料 |
PDF描述 |
|---|---|
| 514FACXXXXXXAAGR | 125 MHz, OTHER CLOCK GENERATOR, PDSO6 |
| 514GCCXXXXXXAAGR | 125 MHz, OTHER CLOCK GENERATOR, PDSO6 |
| 514JBBXXXXXXBAGR | 170 MHz, OTHER CLOCK GENERATOR, PDSO6 |
| 514MBAXXXXXXAAG | 250 MHz, OTHER CLOCK GENERATOR, PDSO6 |
| 514NACXXXXXXBAG | 125 MHz, OTHER CLOCK GENERATOR, PDSO6 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 514ECA000121AAG | 制造商:Silicon Laboratories Inc 功能描述:PROGRAMMABLE XO LVPECL 100.00 MHZ - Trays |
| 514ECA000838BAG | 制造商:Silicon Laboratories Inc 功能描述:PROGRAMMABLE XO - Trays |
| 514ECA000838BAGR | 制造商:Silicon Laboratories Inc 功能描述:OSCILLATOR - Tape and Reel |
| 514F | 功能描述:风扇 50x15mm 24VDC 12CFM 1W 5000RPM 30dBA SB RoHS:否 制造商:Sanyo Denki 产品:Fans 电流类型: 电源电压:48 V 气流:636 CFM 轴承类型: 噪声:83 dBA 速度:6400 RPM 功率额定值:264 W 框架尺寸 (mm):172 mm x 150 mm x 102 mm 外壳材料:Aluminum 端接类型:Wire 系列: |
| 514F | 制造商:ebm-papst Inc 功能描述:FAN 50MM 24VDC |
发布紧急采购，3分钟左右您将得到回复。