- 您现在的位置：买卖IC网 > PDF目录18597 > 543382-5 (TE Connectivity)TOOL INSERT/EXTRACT TIP 25-KIT PDF资料下载
参数资料
| 型号： | 543382-5 |
| 厂商： | TE Connectivity |
| 文件页数： | 3/6页 |
| 文件大小： | 0K |
| 描述： | TOOL INSERT/EXTRACT TIP 25-KIT |
| 标准包装： | 1 |
| 系列： | AMPLIMITE |
| 工具类型： | 插/拔工具尖头 |
| 适用于相关产品： | D-Sub 端子 |
408-9404
i NOTE The wire must be positioned inside the wire slot of the
i NOTE Contacts with tail lengths longer than 10.85 mm [.427
2. Slide thumb over the wire toward the end of the
tip.
NOTE
tip.
3. Slide tip over contact wire barrel until the tip butts
against the contact shoulder.
4. Align contact with the BACK of the contact cavity.
Push contact straight into the contact cavity until the
contact bottoms.
5. Remove the insertion tool; then pull back on the
wire to ensure that the contact is locked into the
contact cavity.
4.2. Extracting A Wire Crimped Contact (Figure 4)
1. Position tool handle between thumb and
fingertips, and align contact wire with the wire slot
on the tip. Hold wire in this position with your thumb.
2. Slide your thumb over the wire toward the end of
the insertion tip.
3. Place tip over the contact post or crimp barrel and
slide the tip straight into the contact cavity until the
tip bottoms against the contact shoulder.
4. Holding the wire tight against the tool handle, pull
back on the tool handle to extract the contact. If you
experience difficulty in extracting the contact, repeat
Steps 1 through 4.
4.3. Inserting A Posted Contact (Figure 5)
1. Place the contact in the contact cavity. Do NOT
push on the contact post.
2. Position the tip over the contact post. Move the
tool along the post until the tip butts against the
contact stabilizer. Align the tip on the stabilizer as
shown in Figure 5.
3. Hold the tool handle, and push the contact post to
make certain that the contact is locked in the cavity.
NOTE
in.] must use yellow color coded insertion tips.
i NOTE The wire must be positioned inside the wire slot of the
NOTE
tip.
Back of Receptacle
Connector 205439-1 (Ref)
Wire
Slide Extraction Tip Over
Contact Post or Crimp
Barrel
Rev D
Wire
Slot
Extraction Handle
Figure 4
3 of 6
相关PDF资料 |
PDF描述 |
|---|---|
| GLFC01A1B | SWITCH ROTARY SIDE |
| 3310C-001-502L | POT 5.0K OHM 9MM SQ RTANG PLAST |
| 296XD501B1N | POT 500 OHM 1/8W CARB HORIZ |
| B32529C6472K | CAP FILM 4700PF 400VDC RADIAL |
| LB26SKG01-6B-JB | SWITCH PUSH DPDT 0.4VA 28V |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 543382-6 | 功能描述:工具套件与外壳 EXTRACTION TIP BLUE 25-KIT POSTED HD-20 RoHS:否 制造商:Molex 产品: 类型: 大小: |
| 543382-7 | 功能描述:工具套件与外壳 INSERTION TIP BLACK 25-KIT POSTED W/PLUG RoHS:否 制造商:Molex 产品: 类型: 大小: |
| 543382-8 | 功能描述:工具套件与外壳 INSRT/EXTR TIP GREEN 25-KIT 28-22AWG HD22 RoHS:否 制造商:Molex 产品: 类型: 大小: |
| 5433833 | 功能描述:固定接线端子 BCH-508HS-19 RoHS:否 制造商:Phoenix Contact 产品:Fixed Terminal Blocks 类型:Wire to Board 节距:5.08 mm 位置/触点数量:2 线规量程:26-16 电流额定值:13.5 A 电压额定值:250 V 安装风格:Through Hole 安装角:Straight 端接类型:Screw 触点电镀: |
| 5433846 | 功能描述:固定接线端子 BCH-508HS-20 RoHS:否 制造商:Phoenix Contact 产品:Fixed Terminal Blocks 类型:Wire to Board 节距:5.08 mm 位置/触点数量:2 线规量程:26-16 电流额定值:13.5 A 电压额定值:250 V 安装风格:Through Hole 安装角:Straight 端接类型:Screw 触点电镀: |
发布紧急采购，3分钟左右您将得到回复。