- 您现在的位置：买卖IC网 > PDF目录18180 > 54UD30-01-2-AJN (Grayhill Inc)SWITCH ROTARY 1DECK 2POLE ADJ PDF资料下载
参数资料
| 型号： | 54UD30-01-2-AJN |
| 厂商： | Grayhill Inc |
| 文件页数： | 8/10页 |
| 文件大小： | 0K |
| 描述： | SWITCH ROTARY 1DECK 2POLE ADJ |
| 标准包装： | 1 |
| 系列： | 54 |
| 位置数： | 2 ~ 6 |
| 层数： | 1 |
| 每层电极数： | 2 |
| 每层电路： | 双刀六掷 |
| 触点额定电压： | 1A @ 125VAC |
| 触动器类型： | 扁平形（直径 6.35mm） |
| 安装类型： | 面板安装 |
| 端接类型： | 焊片 |
| 方向： | 垂直 |
| 摆角： | 30° |
Multi-Deck Rotary Switches
SPECIFICATIONS:
MIL-S-3786 Electrical Values
Military Style
Style M switches, at 85°C, approximately
68% humidity and sea level pressure and
style H and HS at 125°C have been tested to
make and break the following loads as stated
in MIL-DTL-3786/SR04; 250 milliamperes at
28 Vdc resistive, 100 milliamperes at 28 Vdc
inductive (2.8 henries); 75 milliamperes at
115 Vac resistive.
These switches have also been tested at
reduced barometric pressure (70,000 feet),
25°C at approximately 68% relative humidity
to make and break the following loads as
stated in MIL-DTL-3786/SR04; 200
milliamperes, 28 Vdc resistive; 25 milliamperes,
28 Vdc inductive (2.8 henries); 20
milliamperes, 115 Vac resistive. When tested
to these loads and conditions the style M, H
and HS switches meet the following life limiting
or failure criteria after 25,000 cycles in
accordance with MIL-S-3786.
Contact Resistance: 50 milliohms maximum
Insulation Resistance: 1,000 megaohms
minimum between terminals and shafts
Dielectric Strength: 1,000 Vac (atmospheric
pressure) and 450 Vac (reduced pressure)
minimum between mutually insulated parts.
When tested at sea level 25°C and 68%
relative humidity with failure criteria of 50
milliohms max. and 750 Vac breakdown
voltage, these switches will make and break
the following loads: 250 mA at 28 Vdc,
inductive (2.8 henries); 1.25 amps at 28 Vdc
resistive; 2.0 amps at 115 Vac, 60 Hz resistive,
for 10,000 cycles.
These switches also meet MIL-DTL-3786/SR04
for moisture resistance, medium and high shock,
vibration (10 to 2000 cps), thermal shock (-
65°C to 125°C), salt spray, explosion and
terminal pull.
Materials and Finishes
Standard Style
Bases: Melamine per (MIL-M-14) ASTM-D-
5948
Cover, Deck Separators, End Plate and Rotor
Mounting Plate: Phenolic per (MIL-M-14)
ASTM-D-5948
Mounting Bushings: Brass, tin/zinc-plated.
Shaft, Cover Plate, Retaining Rings, Through
Bolts, Shaft Extensions, Stop Arm, Thrust
Washers Stop Washers and Rear Support
Plate: Stainless Steel
Detent Balls: Steel, nickel-plated
Detent Springs: Tinned music wire
Rotor Contact, Stator (Base) Contacts: Silver
alloy
Terminals (Except Common): Brass, tin plated
Common Plate, Including Solder Lug: Brass,
silver-plated .0003" minimum
Mounting Hardware: Two mounting nuts .094"
(2,39) thick by .562" (14,27) across flats and
one internal tooth lockwasher are supplied
with each switch.
Stud Nuts, Mounting Nuts, Lock Washers:
Tin/zinc-plated or stainless steel.
Materials and Finishes
Military Qualified
Bases: Diallyl per (MIL-M-14) ASTM-D-5948
Cover, Deck Separators, End Plate and Rotor
Mounting Plate: Diallyl per (MIL-M-14) ASTM-
D-5948
Mounting Bushings: Brass, tin/zinc-plated.
Shaft, Cover Plate, Retaining Rings,
Through Bolts, Shaft Extensions, Stop
Arm, Stop Washers, Thrust Washers and
Rear Support Plate: Stainless steel
Detent Balls: Steel, nickel-plated
Detent Springs: Tinned music wire
Rotor Contact: Silver alloy
Terminals, Common Plate including
Solder Lug: Brass, silver-plated .0003"
minimum
Mounting Hardware: Two mounting nuts
.094" thick by .562" across flats and one
internal tooth lockwasher are supplied with
each switch.
Stud Nuts, Mounting Nuts, Lock Washers:
Tin/zinc-plated or stainless steel.
Additional Characteristics
Standard Style and Military Qualified
Contact: Shorting or non-shorting wiping
contacts with over 150 grams of contact
force
Rotational Torque: 8-115 ounce-inches
depending upon the number of poles per
deck, number of decks and angle of throw
Mechanical Life Expectancy: 100,000
cycles of operation
Shaft Flat Orientation: Flat opposite
contacting position of pole number one (See
circuit diagram).
Stop Strength: For Standard style: 15 pound-
inches minimum. For Adjustable stop styles:
12 pound-inches
Extended Stud: Single shaft switches of six
or more decks and concentric shaft switches
of a combination of five or more decks
(Standard style) or four or more decks (Military
style) have longer studs with extra mounting
nuts for recommended double end mount.
Grayhill, Inc. ? 561 Hillgrove Avenue ? LaGrange, Illinois
60525-5997 ? USA ? Phone: 708-354-1040 ? Fax: 708-354-2820 ? www.grayhill.com
Rotary
29
相关PDF资料 |
PDF描述 |
|---|---|
| CS325S-26.650MABJ-UT | CRYSTAL 26.65MHZ 18PF SMD |
| DF12.3000.9310.1 | MOD PWR ENTRY 15A 250V M5 SCREW |
| 54D30-01-2-AJN | SWITCH ROTARY 1DECK 2POLE ADJ |
| HCM49-16.000MABJT | CRYSTAL 16.000 MHZ 18PF SMD |
| EF12.1250.1110.01 | MOD PWR ENTRY STD 20A QC PNL |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 54US-1BK-1BJ | 制造商:Grayhill 功能描述:SWITCH ROTARY SPST/SPST 制造商:Grayhill 功能描述:54US30-02-1-11&10N |
| 54US30-02-1-11&10N | 制造商:Grayhill 功能描述:54US30-02-1-11&10N DJUSTABLE STOP, 30&DEG, , 1 DEC - Bulk |
| 54VCXH162244 | 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:LOW VOLTAGE CMOS 16-BIT BUS BUFFER (3-STATE INV) WITH 3.6V TOLERANT INPUTS AND OUTPUTS |
| 54VCXH162244_07 | 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:Low voltage CMOS 16-bit bus buffer (3-state inverter) with 3.6V tolerant inputs and outputs |
| 54VCXH162244_11 | 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:Low voltage CMOS 16-bit bus buffer (3-state non inverter) with 3.6 V tolerant inputs and outputs |
发布紧急采购，3分钟左右您将得到回复。