28
Catalog 82159
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Revised 12-07
millimeters unless otherwise
reference purposes only.
Canada: 1-905-470-4425
Hong Kong: 852-2735-1628
specified. Values in brackets
Specifications subject
Mexico: 01-800-733-8926
Japan: 81-44-844-8013
www.tycoelectronics.com
are metric equivalents.
to change.
C. America: 52-55-1106-0803
UK: 44-8706-080-208
Miniature AMP-IN Terminals
Printed Circuit Board Terminals and Disconnects
Product Facts
■ Eliminates manual
preparation of wires prior to
soldering into pc boards
■ Low applied cost
■ Total height above pc board
is less than most other
components
■ Available for 26-10 AWG,
[0.15-5.5 mm2]
■ Terminal locking lance
holds wire in pc board for
flow soldering
■ Design allows both wire and
terminal to be soldered and
assures proper solder flow
■ Insulation support provides
strain relief for wire and
protection of solder joint
■ Type A terminals will provide
both a positive board stop
and positive insulation stop
■ Type E terminal offers
minimum below pc board
length
The miniature AMP-IN
Terminal is designed not as
an electrical terminal but as
a mechanical holding device
to enhance soldering of
hookup wires to printed circuit
boards. The combination of
terminal and application
tooling eliminates costly
manual preparation of
wires prior to soldering,
and positions the wire to
achieve reliable solder
joints. Movement of the
wire during soldering is
restricted, providing for
proper solder flow.
Technical Documents
Product Specification
108-1081
Application Specification
114-1016
Material and Finish
008 phosphor bronze, Pre-tin plated
Pc Board Thickness — .062 [1.57]