- 您现在的位置：买卖IC网 > PDF目录20681 > 572D686X96R3S2T (Vishay Sprague)CAP TANT 68UF 6.3V 10% 1206 PDF资料下载
参数资料
| 型号： | 572D686X96R3S2T |
| 厂商： | Vishay Sprague |
| 文件页数： | 8/20页 |
| 文件大小： | 0K |
| 描述： | CAP TANT 68UF 6.3V 10% 1206 |
| 标准包装： | 2,500 |
| 系列： | TANTAMOUNT® 572D |
| 电容： | 68µF |
| 电压 - 额定： | 6.3V |
| 容差： | ±10% |
| ESR（等效串联电阻）： | 900 毫欧 |
| 类型： | 保形涂层 |
| 工作温度： | -55°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 1206（3216 公制） |
| 尺寸/尺寸： | 0.126" L x 0.063" W（3.20mm x 1.60mm） |
| 高度 - 座高（最大）： | 0.047"（1.20mm） |
| 制造商尺寸代码： | S |
| 特点： | 通用 |
| 包装： | 带卷 (TR) |
Typical Performance Characteristics
www.vishay.com
CAPACITOR ENVIRONMENTAL CHARACTERISTICS
Vishay Sprague
ITEM
CONDITION
ENVIRONMENTAL CHARACTERISTICS
Humidity tests
At 40 °C/90 % RH 1000 h, no voltage applied. ?
Capacitance change ?
Cap. ? 600 μF ?
Cap. > 600 μF ?
Dissipation factor
?
Within ± 10 % of initial value ?
Within ± 20 % of initial value ?
Not to exceed 150 % of initial ?
+25 °C requirement
Temperature cycles
Moisture resistance
Thermal shock
At -55 °C/+125 °C, 30 min each, for 5 cycles.
MIL-STD-202, method 106 at rated voltage,
42 cycles.
Capacitors are subjected to 5 cycles of the
following: ?
-55 °C (+0 °C, -5 °C) for 30 min, then ?
+25 °C (+10 °C, -5 °C) for 5 min, then ?
+125 °C (+3 °C, -0 °C) for 30 min, then ?
Capacitance change ?
Cap. ? 600 μF ?
Cap. > 600 μF ?
Dissipation factor ?
Leakage current
Capacitance change ?
Cap. ? 600 μF ?
Cap. > 600 μF ?
Dissipation factor ?
Leakage current
Capacitance change ?
Cap. ? 600 μF ?
Cap. > 600 μF ?
Dissipation factor ?
Leakage current
?
Within ± 10 % of initial value ?
Within ± 20 % of initial value ?
Initial specified value or less ?
Initial specified value or less
?
Within ± 10 % of initial value ?
Within ± 20 % of initial value ?
Initial specified value or less ?
Initial specified value or less
?
Within ± 10 % of initial value ?
Within ± 20 % of initial value ?
Initial specified value or less ?
Initial specified value or less
+25 °C (+10 °C, -5 °C) for 5 min
MECHANICAL PERFORMANCE CHARACTERISTICS
TEST CONDITION
CONDITION
POST TEST PERFORMANCE
Shear test
Apply a pressure load of 5 N for 10 s ± 1 s
horizontally to the center of capacitor side body.
Capacitance change ?
Dissipation factor ?
Leakage current
Within ± 10 % of initial value ?
Initial specified value or less ?
Initial specified value or less
There shall be no mechanical or visual damage to
capacitors post-conditioning.
Substrate bend
Vibration
With parts soldered onto substrate test board,
apply force to the test board for a deflection
of 3 mm, for a total of 3 bends at a rate of 1 mm/s.
MIL-STD-202, method 204, condition D, 10 Hz to
2000 Hz, 20 g peak
Capacitance change ?
Dissipation factor ?
Leakage current
Capacitance change ?
Dissipation factor ?
Leakage current
Within ± 10 % of initial value ?
Initial specified value or less ?
Initial specified value or less
Within ± 10 % of initial value ?
Initial specified value or less ?
Initial specified value or less
There shall be no mechanical or visual damage to
capacitors post-conditioning.
Shock
MIL-STD-202, method 213B shock (specified
pulse), condition I, 100 g peak
Capacitance change ?
Dissipation factor ?
Leakage current
Within ± 10 % of initial value ?
Initial specified value or less ?
Initial specified value or less
There shall be no mechanical or visual damage to
capacitors post-conditioning.
Resistance to solder heat
? Recommended reflow profiles temperatures
and durations are located within the Capacitor
Series Guides
Capacitance change ?
Dissipation factor ?
Leakage current
Within ± 10 % of initial value ?
Initial specified value or less ?
Initial specified value or less
? Pb-free and lead-bearing series caps are
backward and forward compatible
There shall be no mechanical or visual damage to
capacitors post-conditioning.
Solderability
MIL-STD-2002, method 208, ANSI/J-STD-002,
test B. Applies only to solder and tin plated
terminations. ?
Capacitance change ?
Dissipation factor ?
Leakage current
Within ± 10 % of initial value ?
Initial specified value or less ?
Initial specified value or less
Does not apply to gold terminations.
There shall be no mechanical or visual damage to
capacitors post-conditioning.
Resistance to solvents
MIL-STD-202, method 215
Capacitance change ?
Dissipation factor ?
Leakage current
Within ± 10 % of initial value ?
Initial specified value or less ?
Initial specified value or less
There shall be no mechanical or visual damage to
capacitors post-conditioning.
Flammability
Encapsulent materials meet UL 94 V-0 with an
oxygen index of 32 %.
Revision: 03-Feb-14
3
Document Number: 40088
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
相关PDF资料 |
PDF描述 |
|---|---|
| B82462A4102M | INDUCTOR POWER 1.0UH 3.0A SMD |
| VE-J6N-CX-F2 | CONVERTER MOD DC/DC 18.5V 75W |
| T95S474M035HSAL | CAP TANT 0.47UF 35V 20% 1507 |
| RMC44DRYI-S734 | CONN EDGECARD 88POS DIP .100 SLD |
| TL431ACDR2G | IC VREF SHUNT PREC ADJ 8-SOICN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 572-DWH | 制造商:LINEMASTER SWITCH CORP 功能描述:FOOT SWITCH, H/DUTY FULL SHIELD, STEEL |
| 572-DWHO | 制造商:Linemaster Switch Corporation 功能描述:Hercules |
| 572E | 制造商:Apex Tool Group 功能描述:CUTTER,ANGLED TIP,45DEG,22AWG,FULL FLUSH 制造商:Cooper Hand Tools / Erem 功能描述:PLIER ESD 115MM 制造商:EREM 功能描述:PLIER, ESD, 115MM 制造商:EREM 功能描述:PLIER, ESD, 115MM; Blade Length:18mm; Copper Wire Cutting Capacity:1.3mm; Cutting Capacity Max:1.3mm; Handle Type:ESD; Jaw Length:6.5mm; Jaw Type:Full Flush; Jaw Width:10.5mm; Length:115mm; Overall Length:4.5"; Plier Style:Full ;RoHS Compliant: NA |
| 572J-101 | 制造商:Greenlee Textron Inc 功能描述: |
| 572P2S36 | 功能描述:电缆组件 MINI-MIZER RoHS:否 制造商:Molex 产品:Power Assemblies 类型:Cable Assembly 连接器端口 A:No Connector 连接器端口 A 管脚计数:4 连接器端口 B:No Connector 连接器端口 B 管脚计数: 型式:Male 线规 - 美国线规（AWG）:20, 28 长度:0.305 m 颜色:Black, Red |
发布紧急采购，3分钟左右您将得到回复。