收藏本站
参数资料
型号： 576303B00000G
厂商： Aavid Thermalloy
文件页数： 104/116页
文件大小： 0K
描述： BOARD LEVEL HEAT SINK
产品培训模块： How to Select a Heat Sink
标准包装： 500
类型： 插件板级
冷却式包装： TO-3
固定方法： 把紧螺栓
形状： 方形
长度： 1.81"（45.97mm）
宽： 1.810"（45.97mm）
机座外的高度（散热片高度）： 1.000"（25.40mm）
温升时的功耗： 6W @ 40°C
在强制气流下的热敏电阻： 在 700 LFM 时为1.5°C/W
自然环境下的热电阻： 6°C/W
材质： 铝
材料表面处理： 黑色阳极化处理
其它名称： 002420
88
INTERF
A
CE
MA
TERIALS
EUROPE
ASIA
Italy Tel: +39 051 764011 email: sales.it@aavid.com
United Kingdom Tel: +44 1793 401400 email: sales.uk@aavid.com
Singapore Tel: +65 6362 8388 email: sales@aavid.com.sg
Taiwan Tel: +886 (2) 2698-9888 email: sales@aavid.com.tw
AMERICA
USA Tel: +1 (603) 224-9988 email: info@aavid.com
www.aavidthermalloy.com
Interface Material / Double Sided Tape
T414 for ceramic or metal packages
Uses a 0.001 inch (0.03 mm) Kapton MT
TM filled polymide
film coated on both sides with high-bond strength, pressure-
sensitive acrylic adhesive that is loaded with aluminum oxide
particles. This provides both good thermal performance and
excellent electrical isolation.
Double-sided thermal tapes adhere the heat sink to the device and offer
good thermal characteristics. They are easy to apply, require no curing time,
can be electrically conductive or isolating, and need no mechanical support
to provide thermal or physical contact between the device and the heat sink.
Aavid can apply one side to a heat sink.
Color
Beige
Electrical function
Insulating
Thickness
0.127 mm (0.005)
Carrier
Kapton MTTM
Thermal impedance
0.60 °C-in2/w
Thermal conductivity
0.37 w/m-k
Breakdown voltage
5000 VAC
Volume resistivity
5 x 1015 Ohm-cm
Lap shear adhesion
125 (0.862) psi
Die shear adhesion
Aluminum 25°C
150 psi
Aluminum 150°C
15 psi
Creep adhesion
25°C @ 12psi
>50 days
150°C @ 12psi
>10 days
T405R for ceramic or metal packages
Uses a 0.002 inch (0.05 mm) aluminum foil core coated on both sides
with high-bond strength, pressure-sensitive acrylic adhesive that is
loaded with aluminum oxide particles. The aluminum foil provides
added thermal conductivity for applications where electrical isolation
is not required. The combination of filter, expanded metal and embossed
surface enhances both tape conformability and thermal performance.
T412 for ceramic or metal packages
Uses an expanded foil carrier coated on both sides with
high-bond strength, pressure sensitive acrylic that is
loaded with titanium diboride particles. The combination
of filter, expanded metal and embossed surface enhances
both tape conformability and thermal performance.
Color
Grey
Electrical function
Conductive
Thickness
0.009 (0.23 )
Carrier
Expanded aluminum
Thermal impedance
0.25 °C-in2/w
Thermal conductivity
1.40 w/m-k
Breakdown voltage
N/A
Volume resistivity
N/A
UL flammability
N/A
Lap shear adhesion
70 psi
Die shear adhesion
Aluminum 25°C
135 psi
Aluminum 150°C
25 psi
Alum.oxide 25°C
125 psi
Alum.oxide 150°C
40 psi
Creep adhesion
25°C @ 12 psi
>50 days
150°C @ 12 psi
>10 days
T410R / T411 for plastic packages
T410R thermally conductive tape consists of a high bond strength,
pressure sensitive acrylic adhesive loaded with aluminum oxide and
coated onto a 0.002 inch (0.05mm) aluminum foil carrier. The other
side of the foil carrier has a silicone pressure sensitive adhesive which
provides excellent adhesion to silicone-contaminated plastics and
other low energy surfaces.
T411 thermally conductive tape consists of a high bond strength,
pressure sensitive adhesive with an aluminum mesh carrier layer. The
mesh carrier allows the tape to conform to curved surfaces of plastic
molded IC packages, providing a high adhesive strength attachment
for heat sinks. The high performance silicone PSA allows adhesion to
silicone-contaminated plastics and other low energy surfaces.
Typical properties
T410R
T411
Construction
Acrylic
Silicone
Adhesive (to heat sink side)
Color
White
Clear (silver)
Carrier
Aluminum foil
Aluminum mesh
Adhesive (onto component side)
Silicone
Color (to component side)
Clear (Silver)
Thickness, mm (inch)
0.18 (0.007)
0.28 (0.011)
Thermal impedance @<1 psi °C-cm2/w (°C-in2/w)
7.1 (1.1)
6.5 (1.0)
Operating temperature range, °C
-50 to + 150
Lap shear adhesion, psi (MPa)
60 (0.414)
14 (0.094)
Die shear adhesion, psi (MPa) steel/FR4
25°C
170 (1.172)
80 (0.552)
125 °C
40 (0.276)
20 (0.138)
Note: Double Sided Tapes are factory applied only.
Color
White
Electrical function
Conductive
Thickness
0.006 (0.015)
Carrier
Aluminum
Thermal impedance
0.54 °C-in2/w
Thermal conductivity
0.50 w/m-k
Breakdown voltage
N/A
Volume resistivity
3 x 10-2 Ohm-cm
UL flammability
94V-0
Rating
U.L.94
Lap shear adhesion
134 psi
Die shear adhesion
Aluminum 25°C
125 psi
Aluminum 150°C
55 psi
Alum.oxide 25°C
145 psi
Alum.oxide 150°C
60 psi
Creep adhesion
25°C @ 12 psi
>50 days
150°C @ 12 psi
>50 days
375224B000 _ _G
Ordering code
ORDERING INFORMATION
example 12 digit part
Ordering code
Tape option
31
T414
32
T405R
33
T412
34
T410R
35
T411
相关PDF资料
PDF描述
P05N-040ST-A-G CONN SOCKT 40POS .5MM VERT SMD
SOMC160347K0GEA RES ARRAY 47K OHM 8 RES 16-SOIC
SMBJ5.0A-E3/52 TVS UNIDIRECT 600W 5V 5% SMB
576203B00000G BOARD LEVEL HEAT SINK
P05N-040PT-A-G CONN PLUG 40POS .5MM VERT SMD
相关代理商/技术参数
参数描述
57631-M001 功能描述:光纤线缆组件 SC TO ST2 SNGL MODE SIMPLEX 3mm 1 METER RoHS:否 制造商:Molex 模式:Multimode 端口类型: 应用: 连接器端口 A:MTP 连接器端口 B:MTP 电缆类型:Jumper 纤维类型:50/125 长度:0.3 m 纤维数量:12 套圈材料:
57632 SL001 功能描述:多配对电缆 20AWG 2PR SHIELD 1000ft SPOOL SLATE RoHS:否 制造商:Belden Wire & Cable 线规 - 美国线规（AWG）:18 对数:1 绞合:16 x 30 屏蔽:Shielded 长度:1000 ft 电压额定值:300 V 外壳材料:Polyvinyl Chloride (PVC) 绝缘材料:Polyethylene (PE) 类型:Audio, Control and Instrumentation 外壳颜色:Chrome
57632 SL002 功能描述:连接线 2PR 20AWG SHIELD RoHS:否 制造商:Belden Wire & Cable 绞合:19 x 32 电压额定值:1 kV 长度:1000 ft 线规 - 美国线规（AWG）:20 绝缘材料:Tetraflouroethylene (TFE) 最大温度:+ 200 C 类型:High Temperature, High Voltage 外壳颜色:Blue (Light) 系列:83027
57632 WH002 制造商:Alpha Wire Company 功能描述:CABLE 2PAIR 20AWG WHITE 500' 制造商:Alpha Wire Company 功能描述:57632 WHITE 500 FT
57632-M001 功能描述:光纤线缆组件 LC TO SC MLT MD 62.5 DUPLEX 1.6mm 1 METER RoHS:否 制造商:Molex 模式:Multimode 端口类型: 应用: 连接器端口 A:MTP 连接器端口 B:MTP 电缆类型:Jumper 纤维类型:50/125 长度:0.3 m 纤维数量:12 套圈材料:
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*