- 您现在的位置：买卖IC网 > PDF目录19055 > 58511-3 (TE Connectivity)SEATING TOOL F.B. 96 PIN PDF资料下载
参数资料
| 型号： | 58511-3 |
| 厂商： | TE Connectivity |
| 文件页数： | 3/4页 |
| 文件大小： | 0K |
| 描述： | SEATING TOOL F.B. 96 PIN |
| 标准包装： | 1 |
| 系列： | * |
3. Insert header into pc board until the compliant
sections of the contacts are resting securely on,
but have not fully entered, the pc board.
A pc board support must be used to provide proper
support for the pc board and alignment of the tool to
the header pins, and to protect the pc board and
header posts from damage. Design a pc board
support fixture for your specific needs using the
recommendations in Instruction Sheet 408–6927.
4. Position appropriate seating tool into header,
making sure tool is bottomed on housing floor.
5. Center seating tool and header under the
applicator ram of the power source; slowly lower
ram until it just meets the seating tool. Verify the
alignment of the board support, pc board, header,
and seating tool.
The pin headers can be seated with an application
unit capable of supplying a downward force of 102
Newtons (N) [23 lb] per contact. 10/20–Ton “H” Frame
Assembly 803880–6 is capable of seating up to 1740
contacts; SM–3 Frame Assembly 814700–[ ] seats up
to 261 contacts. For operating and setup procedure of
the frame assemblies, refer to Customer Manual
409–5567 (“H” frame assembly) or 409–5626 (SM–3
frame assembly).
6. Cycle applicator ram according to instructions
for the power source. Check assembly for proper
seating, using the requirements in Figure 3.
1. Set seating height to the dimension shown in
Figure 3 (applicator shut height will equal the
seating height PLUS the combined thicknesses of
the pc board and pc board support).
2. Position header into pc board so that header
contacts are properly aligned to the board and
board support.
Figure 3
7. Remove pc board and seated header, or
reposition board and board support for seating
additional headers.
相关PDF资料 |
PDF描述 |
|---|---|
| 0854.1606 | LENS CLEAR PEARL EMF 18X18MM |
| OPC-12COL | REBEL REFLECTOR 11MM 13DG |
| OPC-11COL | 11MM COLLIMATING REFLECTOR |
| 7L-16.369MCG-T | OSC TCXO 16.369 MHZ 2.5V SMD |
| ASVTX-11-A-38.400MHZ-T | OSC VCTCXO 38.400 MHZ 3.0V SMD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 585-113A | 制造商:LG Corporation 功能描述:HONG KONG BELFUSE T2A |
| 585-113H | 制造商:LG Corporation 功能描述:FUSE 6X30UL 250-2A(3SBP2) |
| 585-113K | 制造商:LG Corporation 功能描述:F UL 125-2A 5X20 BEL 5MF2A N |
| 58511-4 | 功能描述:手工工具 SEATING TOOL F.B. 192 PIN RoHS:否 制造商:Molex 产品:Extraction Tools 类型: 描述/功能:Extraction tool |
| 5851-15 | 制造商:Seastrom Mfg 功能描述: |
发布紧急采购，3分钟左右您将得到回复。