- 您现在的位置：买卖IC网 > PDF目录18548 > 58517-2 (TE Connectivity)DIE SET CST-100 PDF资料下载
参数资料
| 型号： | 58517-2 |
| 厂商： | TE Connectivity |
| 文件页数： | 1/5页 |
| 文件大小： | 0K |
| 描述： | DIE SET CST-100 |
| 标准包装： | 1 |
| 系列： | Pro-Crimper III, CST-100 |
| 压接或电缆尺寸： | 22-26 AWG |
| 压接手柄： | A9996-ND |
| 连接器类型： | 压接端子 |
| 产品目录页面： | 199 (CN2011-ZH PDF) |
| 配用： | A23962-ND - CONN SOCKET 22-26AWG GOLD CRIMP A19520-ND - CONN TERM CRIMP CST-100 TIN |
| 相关产品： | 679304-1-ND - TOOL PNEUMATIC HEAD ASSEMBLY A97885-ND - TOOL HAND CRIMPING SDE PEW 12 A9996-ND - PRO CRIMPER HAND TOOL W/O DIES |
| 其它名称： | A19531 |
PRO-CRIMPER* III Hand
Crimping Tool Assembly And
Die Set 58517-[ ]
Instruction Sheet
408-4064
10 MAY 12 Rev F
PROPER USE GUIDELINES
Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools are intended for occasional use
and low volume applications. A wide selection of powered application equipment for extended-use, production operations is available.
Locator
(Supplied with
Die Assembly)
Front of Tool
(Locator Side)
Moving Jaw
Die Assembly
Ratchet Adjustment Wheel
Stationary Jaw
Back of Tool
(Wire Side)
Pivot Pin
PRO-CRIMPER III
Hand Crimping
Tool Frame
354940-1
(Instruction
Sheet 408-9930)
The PRO-CRIMPER III Hand Crimping Tool is a “Commercial” grade tool
and is designed primarily for field installation, repair, maintenance work, or
prototyping in industrial, commercial, or institutional applications. Product
crimped with this tool will meet the crimp height requirement for hand tools in
the appropriate Application Specification (114-series), but may not comply
with other feature parameters of the specification. TE Connectivity offers a
variety of tools to satisfy your performance requirements. For additional
information, contact the Tooling Assistance Center at 1-800-722-1111.
Moving
Jaw
Handle
PRO-CRIMPER
III HAND TOOL
58517-1
58517-3
None
DIE ASSEMBLY
PART NUMBER
58517-2
58517-4
58517-5 ?
LOCATOR
PART
NUMBER?
189590-1
1424907-1
1901843-1
CONTACT
FAMILY
CST 100
CST 100 II
CST 100 II
SIZE
(AWG)
26-22
WIRE
INSUL DIA
(mm [in.])
0.89-1.65
[.035-.065]
STRIP LENGTH
(mm [in.])
2.54-2.92
[.100-.125]
? Bench Machine/Battery and
SDE-SA Hand Tool Only
? Supplied with the die assembly. Also available
separately.
Figure 1
?? Contact the PRODUCT INFORMATION CENTER for specific contact part
numbers.
1. INTRODUCTION
PRO-CRIMPER III Hand Crimping Tool Assembly
58517-1 consists of Die Assembly 58517-2 and
PRO-CRIMPER III Hand Tool Frame 354940-1. See
Figure 1.
The die assembly consists of crimping dies and a
locator assembly.
Read these instructions thoroughly before crimping
any contacts.
Reasons for reissue are provided in Section 11,
REVISION SUMMARY.
2. DESCRIPTION (See Figure 1 and Figure 2.)
The tool features a tool frame with a stationary jaw
and handle, a moving jaw, a moving handle, and an
adjustable ratchet that ensures full contact crimping.
The tool frame holds a die assembly with one crimping
section.
NOTE
i
Dimensions on this sheet are in millimeters [with
inch equivalents provided in brackets]. Figures and
illustrations are for identification only and are not
drawn to scale.
The die assembly features a wire anvil, an insulation
anvil, a wire crimper, and an insulation crimper.
Attached to the outside of the frame is a locator, which
holds and helps to position the contact.
?2012 Tyco Electronics Corporation, a TE Connectivity Ltd. Company
All Rights Reserved
*Trademark
TOOLING ASSISTANCE CENTER 1-800-722-1111
PRODUCT INFORMATION 1-800-522-6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.te.com
1 of 5
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or Company names may be trademarks of their respective owners.
LOC B
相关PDF资料 |
PDF描述 |
|---|---|
| ASFL1-10.000MHZ-EC-T | OSCILLATOR 10.0000 MHZ 3.3V SMD |
| 3545S-1-103L | POT 10K OHM 7/8" RD WW |
| CM04RC01T | CHOKE COMMON MODE 800OHMS SMD |
| 3545S-1-502L | POT 5.0K OHM 7/8" RD WW |
| ASA2-22.000MHZ-L-T3 | OSC 22.000 MHZ 1.8V SMD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 58517-3 | 功能描述:折皱器 PRO CRIMP TOOL W.DIE SET RoHS:否 制造商:Hirose Connector 类型: 描述/功能:Cable and Shield Crimper |
| 58517-4 | 功能描述:冲压机与冲模 PRO-CRIMPER II DIE RoHS:否 制造商:Souriau 大小: 产品:Dies 类型:Crimping 描述/功能: |
| 58517-5 | 制造商:TE Connectivity 功能描述:SDE DIE SET, BENCH/BATTERY - Bulk |
| 5851-7BR005 | 制造商:Alpha Wire Company 功能描述:Brown hook-up equipment wire,30awg |
| 5851-8 OR005 | 制造商:Alpha Electronics Corporation 功能描述:EQUIPMENT WIRE 30AWG ORG |
发布紧急采购，3分钟左右您将得到回复。