Pomona
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm).
All specifications are to the latest revisions. Specifications are subject to change without notice.
Registered trademarks are the property of their respective companies. Made in USA
6/9/99
PomonaACCESS 90416 (800) 444-6785 or (425) 446-6010
SY/EH/LS
More drawings available at www.pomonaelectronics.com
C:\Laura Goldberg\FlukeDataSheet\d5893_1_01.doc
Page 1 of
1
Model 5893
48 Pin SSOP Test Clip
0.025 Inch Lead Pitch
Sales: 800-490-2361 Fax: 888-403-3360
Technical Assistance: 800-241-2060
These new test clips provide the user with
an easy means to connect instruments to the fine
pitch plastic SSOP chip leads.
Interfaces with high density SSOP surface
mount chip leads.
Locking feature insures positive retention on
the chip in either vertical or horizontal
position.
SSOP pin numbers are marked on top of
board.
Gold plated connector pins and contacts
assure noise free connections.
Pomona's SSOP test clips are perfect for
system design, field service testing and failure
analysis.
The locking mechanism holds the clip on
the device by gripping the chip body at the ends
of the chip.
Each contact is individually
cantilevered to assure positive contact.
The top interface connects with standard .025" square pins at .100" x .100" spacing. Perfect for use with most
logic analyzers.
Other clips are available in many sizes to fit the most popular SSOP chips now in use. See Pomona's full line
catalog for information on test clips for other sizes.